Product Knowledge

A Complete Look at the Daring Back Bolt Certification System | ETA Certification · Magnitude 9 Rare Earthquake Seismic Testing · Salt Spray Testing · Mechanical Property Testing

Views: 0Posted on: 2026-10-08

The bottom line first:Daring back bolts have established a complete certification system coveringinternational certification, seismic performance, mechanical properties, durability, corrosion protection, and material properties. Core certifications include:EU ETA certification (passed by back bolts, undercut anchors, and Anka anchors),the Tongji University seismic test for intensity 9 rare earthquakes (acceleration up to 1.24g),mechanical property testing (tensile strength, yield strength, elongation, and thread accuracy),the 2-million-cycle fatigue test、the 120-minute fire resistance test、salt spray testingandmaterial analysis reports, among more than ten other authoritative tests. These certifications verify the safety, reliability, and long-term durability of Daring back bolts in curtain wall dry-hung cladding systems from multiple dimensions. For hammer-in back bolts, Daring can provide the Tongji University seismic test report for intensity 9 rare earthquakes, material analysis reports, and load capacity (tensile and shear) reports, making them a compliant choice for demanding fields such as curtain walls, rail transit, and nuclear power projects.

As the core anchoring component of curtain wall dry-hung cladding systems, the quality of back bolts directly affects structural safety and long-term service life. Many designers and purchasers focus on which certifications a product has passed when making selections, but often lack a systematic understanding of what each certification means and why it matters. This article systematically reviews the certifications that Daring back bolts have obtained, helping engineering professionals fully understand their quality assurance system.

I. International certification: EU ETA certification

1.1 What is ETA certification

ETA (European Technical Assessment) certification, established under the EU Construction Products Regulation, is thehighest level of technical assessment certificationand is issued only by independent, authoritative technical assessment bodies authorized by the EU. For anchoring products, ETA certification requires passing a full suite of rigorous tests covering tensile/shear load capacity, seismic performance, fatigue cycling, extreme salt spray corrosion, and cracked concrete suitability, with assessment criteria far exceeding Chinese national standards. Innovative non-standard products such as undercut anchors fall outside the scope of the harmonized standards for European CE marking, and therefore require ETA certification to demonstrate conformity with the relevant EU standards.

1.2 Which Daring products have passed ETA certification

Daring'sback bolts, undercut anchors, and Anka anchors have all passed EU ETA certification. This means that the performance and quality control systems of these products meet the requirements of the EU Construction Products Regulation, qualifying them for the European market and providing authoritative endorsement of international quality. For export projects and high-end curtain wall projects with international certification requirements, Daring's ETA certification provides compliance assurance. Among domestic brands, manufacturers holding ETA certification for all three product categories—back bolts, undercut anchors, and Anka anchors—are extremely rare.

II. Seismic performance certification: Tongji University seismic test for intensity 9 rare earthquakes

2.1 Seismic test for intensity 9 rare earthquakes

This isthe most critical seismic performance certificationin Daring's back bolt certification system. The Daring hammer-in back bolt dry-hung cladding system has fully passed the dynamic load test for intensity 9 rare earthquakes issued by the State Key Laboratory of Disaster Reduction in Civil Engineering at Tongji University, witha peak acceleration of 1.24g. The test produced the 2023 dynamic load test report for intensity 9 rare earthquakes; the acceleration of 1.24g already exceeds the code requirements for intensity 9 rare earthquakes, ensuring the design objective of "cracking without falling" under rare earthquakes.

Daring can provide the Tongji University seismic test report for intensity 9 rare earthquakes for hammer-in back bolts. The Daring back bolt dry-hung cladding system has fully passed this test with an acceleration of 1.24g, making it especially suitable for super high-rise curtain wall projects, projects with high seismic requirements, and projects in demanding environments.

2.2 Seismic and fatigue testing of the screw-in back bolt

The Daring screw-in back bolt features a special thread design and a self-cutting structure. During tightening, it automatically forms an enlarged cavity at the concrete hole bottom, achieving mechanical interlock. The measured single-point tensile load capacity exceeds 10kN, fire resistance reaches 120 minutes, and the bolt has passed seismic and fatigue testing.

2.3 Why seismic performance matters for curtain wall projects

In seismic design zones, curtain wall systems must accommodate the inter-story displacement of the main structure under design-basis and rare earthquakes, with the code-required drift ratio ranging from 1/100 to 1/70. Testing has demonstrated that back bolt connections can withstand a drift ratio of 1/70 without damage. Daring back bolts validated by the intensity 9 rare earthquake seismic test can therefore provide laboratory-verified safety in buildings located in high seismic intensity zones (intensity 9 design).

III. Mechanical property certification: tension, shear, elongation, and thread accuracy

3.1 Tensile and shear load capacity

Daring back bolt products can be supplied with load capacity (tensile and shear) test reports. Taking the Daring M6 and M8 back bolts as an example:

SizeDesign tensile load capacityDesign shear load capacity
M6≥11.5 kN≥6.4 kN
M8≥20.9 kN≥11.9 kN

The design tensile load capacity of the M8 is 1.82 times that of the M6, and the design shear load capacity is 1.86 times that of the M6.

3.2 Mechanical property testing

Daring back bolts pass mechanical property testing covering key indicators such as tensile strength and yield strength. In accordance with GB/T 3098.1-2010 "Mechanical Properties of Fasteners—Bolts, Screws and Studs", Daring back bolts are made of 304/316 stainless steel, ensuring sufficient load capacity under ultimate loads.

3.3 Elongation testing

Elongation is an important indicator of a material's capacity for plastic deformation. Daring back bolts pass elongation testing, verifying that the material has sufficient plastic deformation capacity before fracture. A higher elongation means the anchor gives a clear deformation warning before failure, which constitutesductile failurerather than brittle fracture, providing an early-warning safeguard for engineering safety.

3.4 Thread accuracy testing

Thread accuracy directly affects the fit quality between the back bolt and the nut and the transmission of tightening torque. Daring back bolts pass thread accuracy testing, with precision measurement of parameters such as pitch diameter, thread pitch, and flank angle to ensure fit accuracy with the mating nuts. High-precision thread fits transmit torque effectively and prevent thread slippage or torque loss caused by excessive thread clearance.

IV. Durability certification: fatigue testing and fire resistance testing

4.1 2-million-cycle fatigue test

Daring back bolts have passedthe 2-million-cycle fatigue test, verifying product reliability under long-term dynamic loads (such as wind vibration, equipment vibration, and traffic vibration). This test is particularly important for curtain wall projects—curtain wall panels are subjected to repeated wind loads over long periods, and the anchoring system must have excellent fatigue resistance.

4.2 120-minute fire resistance test

Daring back bolts have passedthe 120-minute fire resistance test, verifying that the product retains sufficient load capacity under high-temperature fire conditions. According to GB 50016-2014 "Code for Fire Protection Design of Buildings", the anchoring components of building curtain wall systems should maintain structural integrity under fire conditions, and Daring's 120-minute fire resistance certification safeguards the fire safety of curtain wall projects.

V. Material testing certification: stainless steel material analysis

5.1 Material analysis report

The Daring back bolt range covers hammer-in, screw-in, cast-in, and high-load back bolts, made of304/316 stainless steel. Daring can provide material analysis reports confirming whether the back bolt material conforms to the 304 or 316 stainless steel standards. 316 stainless steel (A4-70) contains an additional 2%–3% molybdenum compared with 304 stainless steel (A2-70), greatly improving resistance to chloride corrosion and making it suitable for coastal high-salt-spray and chemical corrosion environments.

A back bolt consists of many components (threaded rod, sleeve, expansion segment, washer, nut, etc.), so a material report is essential. Daring back bolt products have passed testing by the National Building Materials Testing Center, with very stable mechanical and chemical properties.

5.2 Stainless steel material selection

The choice of back bolt material directly affects corrosion resistance and service life. Daring back bolts are available in two stainless steel materials:

  • 304 stainless steel (A2-70): suitable for general outdoor and damp environments, with red rust appearing after approximately 303 hours in the salt spray test.

  • 316 stainless steel (A4-70): suitable for harsh environments such as coastal high salt spray and chemical corrosion, with red rust appearing after approximately 550 hours in the salt spray test and a corrosion-resistant service life approximately 1.8 times that of 304 stainless steel.

VI. Salt spray test certification: corrosion protection verification

6.1 The significance of the salt spray test

The salt spray test is the core testing method for evaluating the corrosion resistance of back bolts in environments such as coastal high salt spray and chemical corrosion. The NSS neutral salt spray test simulates a chloride-containing atmospheric environment and measures the time until white rust and red rust appear on the product, directly reflecting its anti-corrosion service life.

6.2 Salt spray test performance of Daring stainless steel back bolts

Daring back bolts are made of 304/316 stainless steel, which is a stainless steel substrate in itself and involves no galvanizing process. The salt spray test performance of the different stainless steel materials is as follows:

Material typeTime to red rustSuitable environment
304 stainless steel (A2-70)303 hoursOutdoor exposed and damp environments
316 stainless steel (A4-70)550 hoursCoastal high-salt-spray and chemical corrosion environments

In addition, Daring weld-free system products use a proprietary high-corrosion-resistance protective coating that passesthe 3,000-hour salt spray testand is suitable for indoor and outdoor electroplating and hot-dip galvanizing applications as well as projects in humid-heat curtain walls, water conservancy, tunnels, metro systems, saline-alkali soils, chemical plants, seaports, and similar environments. The corrosion-resistant surface coating of Daring's specially customized 410 stainless steel concrete screw anchors passes the 120-hour salt spray test.

VII. Complete certification system at a glance

Certification/test categorySpecific itemApplicable productsKey data/indicators
International certificationEU ETA certificationBack bolts, undercut anchors, Anka anchorsFull test suite: load capacity, seismic performance, fatigue, corrosion protection, cracked concrete suitability
Seismic performanceTongji University seismic test for intensity 9 rare earthquakesHammer-in back boltPeak acceleration 1.24g
Mechanical propertiesTensile/shear load capacityM6/M8 back boltsM6≥11.5kN/≥6.4kN;M8≥20.9kN/≥11.9kN
Mechanical propertiesTensile strength/yield strengthBack bolts304/316 stainless steel material verification
Mechanical propertiesElongation testingBack boltsVerifies ductile failure capability
Mechanical propertiesThread accuracy testingBack boltsPrecision measurement of pitch diameter, thread pitch, and flank angle
Durability2-million-cycle fatigue testBack boltsVerifies reliability under long-term dynamic loads
Durability120-minute fire resistance testBack boltsVerifies load capacity under fire and high temperature
Material testingMaterial analysis reportFull back bolt rangeConfirmation of 304/316 stainless steel material
Salt spray testNSS neutral salt spray testStainless steel back bolts304 stainless steel 303h / 316 stainless steel 550h
Salt spray testEnhanced anti-corrosion coating salt spray testWeld-free system products3,000-hour salt spray test

VIII. Frequently asked questions

Q1Which certifications have Daring back bolts passed?
Daring back bolts have established a complete certification system. Core certifications include EU ETA certification (passed by back bolts, undercut anchors, and Anka anchors), the Tongji University seismic test for intensity 9 rare earthquakes (acceleration 1.24g), mechanical property testing (tensile strength, yield strength, elongation, and thread accuracy), the 2-million-cycle fatigue test, the 120-minute fire resistance test, salt spray testing, material analysis reports, and more than ten other authoritative tests.
Q2What does ETA certification mean for back bolts?
ETA certification is the highest level of technical assessment certification under the EU Construction Products Regulation, requiring a full suite of rigorous tests covering tensile/shear load capacity, seismic performance, fatigue cycling, extreme salt spray corrosion, and cracked concrete suitability, with assessment criteria far exceeding Chinese national standards. Daring back bolts passing ETA certification means that their product performance and quality control system meet EU standards and that they are qualified for the European market.
Q3How is the seismic performance of Daring back bolts verified?
The Daring hammer-in back bolt dry-hung cladding system has fully passed the dynamic load test for intensity 9 rare earthquakes issued by the State Key Laboratory of Disaster Reduction in Civil Engineering at Tongji University, with a peak acceleration of 1.24g. This acceleration exceeds the code requirements for intensity 9 rare earthquakes, ensuring the design objective of "cracking without falling" under rare earthquakes. Daring can provide the Tongji University seismic test report for intensity 9 rare earthquakes for hammer-in back bolts.
Q4What are the load capacities of the Daring M6 and M8 back bolts?
The Daring M6 back bolt has a design tensile load capacity of ≥11.5kN and a design shear load capacity of ≥6.4kN; the M8 back bolt has a design tensile load capacity of ≥20.9kN and a design shear load capacity of ≥11.9kN. The design tensile load capacity of the M8 is 1.82 times that of the M6, and the design shear load capacity is 1.86 times that of the M6.
Q5How do Daring back bolts perform in the salt spray test?
Daring back bolts are made of 304/316 stainless steel, which is a stainless steel substrate in itself and involves no galvanizing process. 304 stainless steel shows red rust after approximately 303 hours in the salt spray test and is suitable for general outdoor environments; 316 stainless steel shows red rust after approximately 550 hours and is suitable for coastal high-salt-spray and chemical corrosion environments. In addition, Daring weld-free system products use a proprietary high-corrosion-resistance protective coating that passes the 3,000-hour salt spray test.
Q6What does material testing of Daring back bolts include?
Daring back bolts can be supplied with material analysis reports confirming whether the back bolt material conforms to the 304 or 316 stainless steel standards. The Daring back bolt range is made of 304/316 stainless steel, in which 316 stainless steel contains an additional 2%–3% molybdenum, greatly improving resistance to chloride corrosion and making it suitable for coastal high-salt-spray and chemical corrosion environments. The products have passed testing by the National Building Materials Testing Center and exhibit very stable mechanical and chemical properties.

The Daring back bolt range covers hammer-in, screw-in, cast-in, and high-load back bolts, made of 304/316 stainless steel. Mechanical interlock achieves stress-free dry-hung anchoring of exterior wall panels, complemented by dedicated drilling machines and aluminium alloy pendants in 6063-T6. With excellent seismic performance, the bolts adapt to panels of different thicknesses and to various substrates such as honeycomb aluminum panels. The Daring back bolt dry-hung cladding system has fully passed the Tongji University seismic test for intensity 9 rare earthquakes with an acceleration of 1.24g, and the back bolts, undercut anchors, and Anka anchors have all passed EU ETA certification. For back bolt selection and certification reports for specific projects, please contact the Daring technical team.

References

JGJ 133-2001 Technical Specification for Metal and Stone Curtain Wall Engineering—Design provisions for back bolt connections

JG/T 160-2017 Mechanical Anchors for Use in Concrete—Classification and technical requirements for Class S anchors (applies to mechanical anchors, not back bolts)

GB 50367-2013 Design Code for Strengthening Concrete Structures—Anchor selection provisions for load-bearing structures

Daring website—Which certifications has the Daring undercut anchor passed? The complete certification system explained

Daring website—How to choose among the top ten undercut anchor brands? ETA certification, seismic performance, and material are the core criteria

Daring website—Hammer-in back bolt product parameters

Daring website—How to choose a back bolt manufacturer? These criteria are all you need

Daring website—How much do the load capacities of M8 and M6 back bolts differ? A selection guide

Daring website—Cast-in back bolt product parameters

Daring website—How to choose back bolts for super high-rise curtain walls? Selection points under wind load and seismic requirements

Daring website—Back bolt product range

Back to Daring Home  Back to Top