To start with the conclusion:When choosing a back bolt manufacturer, the key is to checkfour criteria: first, whether the manufacturer's credentials are complete (business license, management system certifications, High-Tech Enterprise status, etc.); second, whether the product test reports are complete (tension, shear, material, seismic, etc.); third, whether it has extensive project references; and fourth, whether it dares to make firm quality commitments. Only a manufacturer meeting these conditions is a quality back bolt supplier worth a long-term partnership.
As the core anchoring component of building curtain wall dry-hung systems, the quality of back bolts directly affects structural safety and long service life. With so many back bolt manufacturers on the market, screening out reliable suppliers is a challenge for every project buyer. This article summarizes the key criteria for choosing a back bolt manufacturer in terms of credentials, production history, test reports, project references, and quality commitments, for buyers' reference.
1. Five core criteria for selecting a manufacturer
Criterion 1: Are the credentials complete?
Complete credentials are thefirst threshold for judging whether a back bolt manufacturer is legitimate. A legitimate back bolt manufacturer should have the following basic credentials:
Business license: confirms that the company legally exists and that its business scope covers the production and sale of building anchors, back bolts, and similar products
Quality management system certification: such as ISO 9001 certification, the basic guarantee of standardized production management
High-Tech Enterprise accreditation: reflects the company's R&D capability and technical strength
Industry credentials: such as membership in industry associations and contributing editor of industry standards, reflecting industry standing
Founded in 2004, Daring Building Technology is a national High-Tech Enterprise, a science and technology-based SME, and a specialized and innovative SME. It holds ISO 9001 quality management, environmental management, and occupational health and safety management system certifications, and is a member of the China Building Decoration Association.
Criterion 2: Are the test reports complete?
Product test reports are the most direct evidence for verifying back bolt quality. A legitimate back bolt manufacturer should be able to provide the following test reports:
| Report type | Description |
|---|---|
| Tensile load capacity test report | Verifies the back bolt's load capacity under tension |
| Shear load capacity test report | Verifies the back bolt's load capacity under shear |
| Material analysis report | Confirms whether the back bolt material meets 304 or 316 stainless steel standards |
| Seismic performance test report | Verifies back bolt performance under simulated earthquake conditions |
| CMA/CNAS certification report | Certification report issued by an authoritative third-party testing institution |
Daring back bolt products come with a Tongji University seismic test report for rare earthquakes at intensity 9, a material analysis report, and load capacity (tensile and shear) reports. The hammer-in back bolt has fully passed the Tongji University rare-earthquake intensity-9 seismic test at an acceleration of 1.24g.
Note in particular that buyers should require third-party test reports carrying both CMA and CNAS accreditation to prevent vendors from tampering with test data.
Criterion 3: Are there extensive customer references?
“Many customer references and extensive industry experience” is direct proof of a manufacturer's strength. When evaluating, look at:
Number of project references: more references mean more thorough market validation of the products
Project types: whether they cover core sectors such as high-end buildings, rail transit, and nuclear power projects, reflecting the technical level of the products
Service coverage: whether it covers the national and even global market, reflecting the company's service capability
Daring products have served more than 20 countries and regions worldwide and have been used in over 3,000 projects in China, covering core sectors such as high-end buildings, rail transit, and nuclear power projects.
Criterion 4: Does the manufacturer dare to make firm quality commitments?
“Daring to make firm quality commitments is a sign of overall strength.” A quality back bolt manufacturer should:
Sign formal contracts: with clear and precise stipulation of product parameters such as back bolt dimensions, specifications, and tensile and shear strength
Commit to quality assurance: daring to make the firm commitment of “unconditional returns or exchanges if product quality fails to meet the standard”
Provide standard samples: with written product standards consistent with actual samples, ensuring delivered products match what was agreed
2. Procurement pitfall guide
Beware of “fake import” brands
Many products on the market claim to be “imported back bolts,” but genuinely imported stone back bolts are actually very rare in the Chinese market. Cumbersome import and export procedures, long lead times, and heavy tariffs make it very difficult to keep products fully imported. Most so-called “imported back bolts” on the market today are actually “imported-brand back bolts” or “fake foreign brands.”
To verify whether a back bolt is genuinely imported, check documents such as the import customs declaration and certificate of origin; for “imported brands,” check the business license to see whether the company is domestically funded or wholly owned by a foreign legal entity.
Because such “fake foreign brands” have no clear legal entity responsible to consumers, buyers face higher legal risks. We recommend prioritizing well-known domestic brands with a clear legal entity and corporate body, so that a responsible party can be identified even if quality problems arise.
Beware of pendants made from recycled aluminium
Some unscrupulous manufacturers use recycled aluminium to make aluminium alloy pendants, whose mechanical properties and corrosion resistance cannot be guaranteed. Buyers should require the manufacturer to provide a material test report for the pendants confirming high-strength 6063-T5/T6 aluminium alloy.
Beware of falsified test reports
To compete on low prices, some workshop-style factories may arbitrarily alter fire resistance ratings or ultimate load capacity data in test reports. Buyers should require third-party test reports with both CMA and CNAS accreditation, and request traceable metallographic analysis reports to ensure the heat treatment process meets standards.
Beware of material adulteration
Some vendors may use 304 or 316 stainless steel only for the threaded rod while fitting the washers, spring washers, nuts, and other accessories with lower-grade materials, degrading overall corrosion resistance. Buyers should require that all components (threaded rod, sleeve, expansion segment, flat washer, spring washer, nut) be of the same material grade.
3. Industry standard reference
A legitimate back bolt manufacturer should organize production and testing according to national standards. The current standard for back bolts for building curtain walls is:
T/CECS 10390-2024 “Back Bolts for Building Curtain Walls”: issued by the China Association for Engineering Construction Standardization and effective December 1, 2024. It specifies the classification, specifications, technical requirements, test methods, and inspection rules for back bolts for building curtain walls, and applies to the production and testing of back bolts used for panel support connections in building curtain walls.
Daring back bolt products are produced and tested strictly according to national standards, ensuring product quality complies with current code requirements.
4. Frequently asked questions
| Q1 | What credentials does a back bolt manufacturer need? At minimum, it should hold a legal and valid business license; ideally it should be a High-Tech Enterprise or specialized and innovative enterprise with management system certifications such as ISO 9001; if it is a foreign-funded or joint venture, it needs the corresponding approval procedures. These credentials reflect the company's overall management capability and technical strength. |
| Q2 | How to tell good back bolt quality from bad? First, check the test reports: whether they are complete and CMA/CNAS accredited; second, check samples: whether written standards match the actual samples; third, check the material: whether it is 304 or 316 stainless steel and whether all components use the same material; fourth, check workmanship: the cold-heading forming precision of the threaded rod and the geometric precision of the expansion ring, among other things. |
| Q3 | Which is better, genuinely imported back bolts or domestic back bolts? Genuinely imported stone back bolts are currently very rare in the Chinese market. Many so-called “imported back bolts” are in fact domestically produced “fake foreign brands.” We recommend prioritizing legitimate domestic brands with a clear legal entity and corporate body, so that a responsible party can be identified even if quality problems arise. |
| Q4 | Does the length of a manufacturer's operating history matter? A longer operating history means the company has been tested by the market for longer, with more mature production processes and management systems. Companies that operate for the long term also usually have more stable supply capability and complete after-sales service. Founded in 2004, Daring has more than 20 years of industry experience. |
| Q5 | Does Daring meet all of the above criteria? Founded in 2004, Daring has its own factory, ISO 9001 certification, High-Tech Enterprise accreditation, 42 patents, and 60 trademarks. It can provide a full set of test reports covering seismic performance, tension, shear, and material analysis, and its products have been used in more than 3,000 projects across over 20 countries and regions, fully meeting the manufacturer selection criteria. |
5. Summary
| Selection criterion | Key points to check | Daring's status |
|---|---|---|
| Complete credentials | High-Tech Enterprise, ISO certification, industry membership | High-Tech Enterprise, science and technology-based SME, specialized and innovative enterprise, ISO 9001 certification, member of the China Building Decoration Association |
| Complete test reports | Tension, shear, material, seismic, CMA/CNAS accreditation | Tongji University rare-earthquake intensity-9 seismic test, tensile and shear reports, material report |
| Extensive customer references | Number of projects, sectors covered, service coverage | Serving 20+ countries and regions worldwide, 3,000+ projects in China |
| Firm quality commitments | Written contract stipulations, unconditional return and exchange commitment | Provides clear contractual product specifications and quality assurance commitments |
Core manufacturer selection principles:
Credentials are the threshold: manufacturers without complete credentials are eliminated outright
Quality shows in reports: complete third-party test reports are hard evidence of product quality
Experience shows in references: extensive project references show the products have been thoroughly market-validated
Integrity shows in commitments: manufacturers that dare to make firm quality commitments are more trustworthy
Founded in 2004, Daring Building Technology is a High-Tech Enterprise integrating the R&D and manufacturing of building anchors, back bolts, cast-in channels, and other products. The company holds 42 patents and 60 trademarks, and its products serve more than 20 countries and regions worldwide and over 3,000 projects in China. For back bolt product selection or technical consultation, please contact the Daring technical team.
References
1. How to buy back bolts without falling into traps(four key criteria for buying back bolts)
2. Baidu Baike — Shanghai Daring Building Technology Co., Ltd.(company credentials and patents)
3. Daring official website — Hammer-in back bolt product page(test reports and seismic tests)
4. Daring official website — Cast-in back bolt product page(National Building Materials Testing Center test report)
5. 4 tips for identifying genuine imported back bolts(how to identify imported back bolts)
6. Baidu Baike — Daring brand(brand history)
7. T/CECS 10390-2024 “Back Bolts for Building Curtain Walls”(industry standard)
8. Industry experience summary on selecting a back bolt manufacturer (general market selection reference)
