To start with the conclusion:The cast-in back bolt, also called the honeycomb aluminium panel back bolt, is a back bolt product pre-embedded during panel fabrication, mainly used forhoneycomb aluminium panels and similar composite panels in dry-hung installations. The core of its installation lies in thecast-in stage — the back bolt is embedded in the panel during honeycomb aluminium panel production, and on site it is connected directly to the sub-frame through the matching pendant. The cast-in back bolt is suitable forhoneycomb aluminium panel curtain walls, prefabricated building facades, and rail transit station decoration and similar applications.
In building curtain wall dry-hung systems, the cast-in back bolt is a special back bolt type that differs fundamentally in installation method from hammer-in and screw-in back bolts. It is not drilled and installed on site but pre-embedded at the panel production stage, offering high installation efficiency, reliable connection, and a clean appearance. This article describes in detail the installation methods and applicable scenarios of the cast-in back bolt.
1. What is a cast-in back bolt
The cast-in back bolt, also called the honeycomb aluminium panel back bolt, is a back bolt product pre-embedded during honeycomb aluminium panel fabrication. Unlike hammer-in and screw-in back bolts, which require on-site drilling and reaming, the cast-in back bolt is already installed at the panel production stage and is used directly for dry-hung connections on site.
The typical application of the cast-in back bolt ishoneycomb aluminium panels — a composite panel consisting of two aluminium sheets with a honeycomb core in between, widely used in building curtain walls, rail transit, prefabricated buildings, and other fields. Dry-hung installation with cast-in back bolts is durable and stable and adapts to all climates and environmental changes.
The cast-in back bolt belongs toback bolt connection technology, one of the more advanced dry-hanging technologies in the stone and metal curtain wall field. This technology allows stress-free fabrication and assembly of panels, offers high connection strength, and provides good seismic performance and durability.
2. Structural features of the cast-in back bolt
The basic structure of the cast-in back bolt includes the following components:
| Component | Description |
|---|---|
| Threaded rod | Stainless steel; works with the sleeve to form the anchorage |
| Sleeve (cast-in part) | Pre-embedded inside the honeycomb aluminium panel, forming an internal thread connection |
| Base plate | Embedded inside the panel unit, providing the anchoring base |
| Matching pendant | Connects the back bolt to the sub-frame |
In the cast-in back bolt, the base plate is embedded inside the panel unit and the barrel extends through the panel surface, forming an internal thread connection interface. This design ensures the back bolt and the panel form a solid integral unit that will not loosen or detach under load.
3. Installation method of the cast-in back bolt
3.1 Cast-in stage (factory fabrication)
Thecore steps are completed in the factory, not on site. The specific steps are as follows:
- Honeycomb aluminium panel production: during honeycomb aluminium panel fabrication, positions for the cast-in sleeves are preset at specified locations on the back of the panel
- Cast-in sleeve installation: the sleeve (with base plate) of the cast-in back bolt is embedded inside the honeycomb aluminium panel; the base plate sits inside the panel and the barrel extends through the panel surface
- Curing and fixing: ensuring the cast-in sleeve is firmly bonded to the honeycomb aluminium panel, forming the internal thread connection interface
- Factory inspection: checking whether the cast-in positions are accurate and the connections firm
3.2 On-site installation stage
On-site installation of the cast-in back bolt is simpler than for hammer-in and screw-in types; the core step isconnecting the back bolt to the sub-frame. The general process of back bolt dry-hanging is as follows:
- Preparation: study the drawings, prepare materials and tools, and brief the installation crew on technical requirements
- Survey and layout: position accurately based on the main structure's reference axes and leveling points to establish the curtain wall installation datum lines
- Cast-in part treatment: check the position and firmness of cast-in parts from civil construction and reinforce any nonconforming positions
- Sub-frame installation: install vertical (main) and horizontal sub-frame members, ensuring plumbness and flatness
- Pendant installation: mount the matching aluminium alloy pendants onto the sub-frame
- Panel hanging: connect the honeycomb aluminium panels with cast-in back bolts to the sub-frame via the pendants, completing the hanging
- Adjustment and tightening: adjust in three dimensions to ensure flatness and plumbness meet requirements, then tighten the connecting bolts
- Acceptance: check installation quality and complete the work
4. Core comparison of cast-in and undercut back bolts
Cast-in back bolts differ significantly from hammer-in and screw-in back bolts (collectively called undercut back bolts) in installation method and applicable scenarios; understanding these differences helps in correct selection:
| Comparison item | Cast-in back bolt | Hammer-in / screw-in back bolt |
|---|---|---|
| Installation timing | Pre-embedded at panel production stage | Drilled and installed on site |
| Installation process | Factory pre-embedding + on-site hanging | On-site drilling + reaming + installation |
| On-site workload | Low | High |
| Applicable panels | Mainly honeycomb aluminium panels | Stone, ceramic panels, etc. |
5. Applicable scenarios for cast-in back bolts
5.1 Honeycomb aluminium panel curtain walls
Honeycomb aluminium panels are thecore application of cast-in back bolts. Honeycomb aluminium panel curtain walls are widely used for exterior decoration of modern buildings, offering light weight, high strength, good flatness, and thermal insulation. Cast-in back bolts are embedded during honeycomb aluminium panel production and hung directly on site, giving high installation efficiency and reliable connections.
5.2 Rail transit station decoration
Honeycomb aluminium panels are often used for wall and column decoration in rail transit stations, and cast-in back bolts serve as their dry-hung connectors. This dry-hung method is durable and stable and adapts to all climates and environmental changes.
5.3 Prefabricated building facades
Prefabricated buildings place high demands on component standardization and construction efficiency. Cast-in back bolts are embedded during factory prefabrication and hung directly on site, aligning perfectly with prefabricated construction concepts and effectively shortening on-site installation schedules.
5.4 Other applicable scenarios
- Building interior decoration: dry-hung installation of interior honeycomb aluminium panel walls
- Existing building renovation: dry-hanging of lightweight panels in facade renovation
- Industrial plant facades: installation of exterior decorative panels on industrial buildings
6. Selection recommendations for cast-in back bolts
When selecting a cast-in back bolt, focus on the following:
- Panel type: confirm whether it is a honeycomb aluminium panel or another composite panel suitable for pre-embedding
- Material selection: cast-in back bolts are generally 304 or 316 stainless steel. Grade 316 is strongly recommended for highly corrosive coastal environments, while 304 is sufficient for ordinary inland environments
- Cast-in positions: determine cast-in positions and quantities based on panel dimensions and load requirements
- Matching pendants: use matching aluminium alloy pendants of the same brand as the back bolts to ensure system compatibility
- Manufacturer credentials: choose a legitimate manufacturer with a production history and complete test reports
7. Daring cast-in back bolt product parameters
| Parameter | Specification |
|---|---|
| Material | 304 stainless steel / 316 stainless steel |
| Matching pendants | 6063-T6 aluminium alloy pendants, anodized |
| Seismic performance | Passed the Tongji University rare-earthquake intensity-9 seismic test |
| Acceleration | 1.24g |
| Applicable panels | Honeycomb aluminium panels, composite panels |
8. Frequently asked questions
| Q1 | How does a cast-in back bolt differ from a hammer-in back bolt? Cast-in back bolts are pre-embedded at the panel production stage and hung directly on site; hammer-in back bolts must be drilled, reamed, and installed on site. Cast-in back bolts are mainly used for honeycomb aluminium panels and involve less on-site work. |
| Q2 | Which panels are cast-in back bolts suitable for? Cast-in back bolts are mainly suitable for honeycomb aluminium panels and can also be used for other composite panels suitable for pre-embedding. They are not suitable for ordinary stone or ceramic panels. |
| Q3 | How efficient is cast-in back bolt installation? Cast-in back bolts are pre-embedded in the factory and only need to be hung and connected on site. Installation efficiency is far higher than for hammer-in and screw-in back bolts drilled on site, significantly shortening on-site construction schedules. |
| Q4 | Can cast-in back bolts be used for stone curtain walls? Cast-in back bolts are mainly suitable for composite panels such as honeycomb aluminium panels and are not suitable for stone curtain walls. Stone curtain walls usually use hammer-in or screw-in back bolts, drilled and installed on site. |
| Q5 | What are the advantages of Daring cast-in back bolts? Daring cast-in back bolts use 304/316 stainless steel with matching 6063-T6 aluminium alloy pendants. Durable and stable with excellent seismic performance, they have passed the Tongji University rare-earthquake intensity-9 seismic test and are suitable for all climates and environmental conditions. |
9. Key installation principles
- Pre-embedding is the key: the core of cast-in back bolt installation is the factory pre-embedding stage, ensuring accurate positions and firm connections
- Hanging is the focus: during on-site hanging, adjust flatness and plumbness to ensure the overall curtain wall appearance
- System matching: back bolts and pendants should be matching products of the same brand to ensure system compatibility
- Build to the drawings: strictly follow design drawings and construction codes to ensure quality and safety
Daring offers a full range of cast-in back bolts (honeycomb aluminium panel back bolts) in 304/316 stainless steel with matching 6063-T6 aluminium alloy pendants, widely used in honeycomb aluminium panel curtain walls, rail transit, prefabricated buildings, and other fields. For cast-in back bolt selection advice for a specific project, please contact the Daring technical team.
References
1. Daring official website — Cast-in back bolt product page(cast-in back bolt (for honeycomb aluminium panels) product description)
2. Daring official website — Honeycomb aluminium panel back bolt product page(cast-in back bolt product description)
3. Back bolt stone curtain wall construction technique(process flow and principles)
4. Patent literature on cast-in back bolt structure (technical principle description)
