To state the conclusion first:The Daring undercut anchor has established a complete certification system covering international certification, the highest domestic certification, mechanical properties, durability, corrosion protection, and material properties. The core certifications include:EU ETA certification, S-level anchor certification, mechanical property testing, 2 million cycle fatigue testing, 120-minute fire resistance testing, high-temperature testing, seismic testing, coating thickness testing, salt spray testing, elongation testing, and thread precision testing and more than ten others. These certifications validate the safety, reliability, and long-term durability of Daring undercut anchors in load-bearing structures from different dimensions, making them a compliant choice for high-end fields such as curtain walls, steel structures, rail transit, and nuclear power projects.
Undercut anchors are the compliant first choice for load-bearing structure anchoring, and their certification system directly affects the compliance and safety of project selection. When selecting products, many designers and purchasers focus on which certifications a product has passed but often lack a systematic understanding of what each certification means and why it matters. This article systematically reviews the certifications the Daring undercut anchor has passed, helping engineering personnel fully understand its quality assurance system.
I. International Certification: EU ETA Certification
ETA (European Technical Assessment) certificationis the highest-level technical assessment certification under the EU Construction Products Regulation, issued only by independent authoritative technical assessment bodies authorized by the EU. For undercut mechanical anchors, ETA certification requires passing tensile/shear load capacity, seismic performance, fatigue cycling, extreme salt spray corrosion, and cracked concrete suitability and other full, rigorous tests, with review standards far exceeding national standards.
The Daring undercut anchor has passed EU ETA certification, which means its product performance and quality control system meet the requirements of the EU Construction Products Regulation, qualifying it for the European market, and also serving as authoritative endorsement of international quality. For foreign-related projects and high-end curtain wall projects with international certification requirements, the ETA certification of Daring undercut anchors provides compliance assurance.
II. The Highest Domestic Certification: S-Level Anchor Certification
According to JG/T 160-2017, Mechanical Anchors for Concrete, anchors are classified by suitability as A-level and S-level:
A-level anchors: suitable only for non-cracked concrete
S-level anchors: suitable for cracked concrete and seismic zones, the highest classification of mechanical anchors
The Daring undercut anchor has passed S-level anchor certification, proving its suitability for cracked concrete and seismic fortification zones. According to GB 50367-2013, mechanical anchors for load-bearing structures should be undercut anchors with interlock effect, and S-level certification is the authoritative proof that an undercut anchor is suitable for cracked concrete.
III. Mechanical Property Certifications: Mechanical Properties, Elongation, and Thread Precision
3.1 Mechanical Property Testing
The Daring undercut anchor has passed mechanical property testing, including testing of key indicators such as tensile strength and yield strength. In accordance with GB/T 3098.1-2010, Mechanical Properties of Fasteners - Bolts, Screws and Studs, Daring undercut anchors use grade 5.8 or higher carbon steel or 304/316 stainless steel; grade 5.8 has a minimum tensile strength of 520MPa and grade 8.8 has 800MPa, ensuring the anchor has sufficient load capacity under ultimate loads.
3.2 Elongation Testing
Elongation is an important indicator of a material's plastic deformation capacity. The Daring undercut anchor has passed elongation testing, verifying that the material has sufficient plastic deformation capacity before fracture. Higher elongation means the anchor shows obvious deformation warning before failure - ductile failure rather than brittle fracture - providing an early warning safeguard for engineering safety.
3.3 Thread Precision Testing
Thread precision directly affects the fit quality between the anchor and nut and the transmission of tightening torque. The Daring undercut anchor has passed thread precision testing, with precision measurement of parameters such as pitch diameter, thread pitch, and flank angle to ensure fit precision with the matching nut. High-precision thread fit transmits torque effectively and avoids thread slippage or torque loss caused by excessive thread clearance.
IV. Durability Certifications: Fire Resistance, Fatigue, High-Temperature, and Seismic Performance
4.1 120-Minute Fire Resistance Test
The Daring undercut anchor has passed the 120-minute fire resistance test, ensuring it retains a certain load capacity under extreme high-temperature environments such as fires. For load-bearing structure anchoring, fire resistance is a key indicator for safeguarding personnel evacuation and structural safety. A fire resistance duration of 120 minutes far exceeds the fire resistance limit requirements of ordinary building members, providing ample protection for fire safety.
4.2 2 Million Cycle Fatigue Test
The Daring undercut anchor has passed the 2 million cycle fatigue test, verifying its durability under long-term cyclic loading. Under dynamic loads such as wind loads, train vibrations, and equipment operation, anchors must withstand millions of stress cycles without fatigue failure. Passing the 2 million cycle fatigue test means Daring undercut anchors can meet the long-term use requirements of dynamic load scenarios such as rail transit, bridges, and industrial plants.
4.3 High-Temperature Testing
The Daring undercut anchor has passed high-temperature testing, making it suitable for high-temperature operations such as welding. Unlike chemical anchors, undercut anchors rely on pure mechanical interlock without depending on adhesives, so there is no adhesive failure at high temperature. High-temperature testing verifies the stability of the anchor's mechanical properties in high-temperature environments, ensuring reliable anchoring force even under welding heat effects.
4.4 Seismic Testing
The Daring undercut anchor has passed the seismic test at the building materials testing center, with stable, excellent anchoring performance under high loads, vibration loads, and impact loads. The ultimate load capacity of undercut anchors is essentially unaffected by dynamic loading, with no slip risk, making them suitable for seismic fortification zones. According to GB 50367-2013, when anchors are used in load-bearing structures in seismic fortification zones, undercut anchors or special reverse-cone adhesive anchors should be used, and they are permitted only for buildings with a seismic fortification intensity no higher than 8 degrees and built on Class I or II sites.
V. Corrosion Protection Certifications: Coating Thickness and Salt Spray Testing
5.1 Coating Thickness Testing
The Daring undercut anchor has passed coating thickness testing; carbon steel products use electro-galvanizing or hot-dip galvanizing processes, with hot-dip galvanized coating thickness of 45 um or more, meeting relevant standard requirements. Coating thickness is a key factor determining corrosion protection; sufficient coating thickness effectively isolates corrosive media and extends the anchor's service life in outdoor and humid environments.
5.2 Salt Spray Testing
The Daring undercut anchor has passed salt spray testing, verifying its durability in corrosive environments. The salt spray test is an accelerated test method for evaluating the corrosion resistance of metal materials, testing the corrosion resistance of coatings or materials by simulating salt spray corrosion conditions in marine or industrial atmospheres. Daring undercut anchors' salt spray test results meet relevant standard requirements, making them suitable for corrosive environments such as coastal high-salt-spray areas and industrial pollution.
VI. Certification Overview Table for Daring Undercut Anchors
| Certification category | Certification item | Content verified |
|---|---|---|
| International certification | EU ETA certification | Full assessment of load capacity, seismic performance, fatigue, corrosion protection, and cracked concrete suitability |
| Highest domestic level | S-level anchor certification | Suitable for cracked concrete and seismic zones |
| Mechanical properties | Mechanical property testing | Key indicators such as tensile strength and yield strength |
| Elongation testing | Plastic deformation capacity of the material; ductile failure warning | |
| Thread precision testing | Fit precision of pitch diameter, thread pitch, and flank angle | |
| Durability | 120-minute fire resistance test | Load capacity retention in high-temperature fire environments |
| 2 million cycle fatigue test | Durability under long-term cyclic loading | |
| High-temperature testing | Adaptability to high-temperature operations such as welding | |
| Seismic testing | Anchoring stability under high loads, vibration, and impact | |
| Corrosion protection | Coating thickness testing | Hot-dip galvanized coating of 45 um or more; electro-galvanized coating up to standard |
| Salt spray testing | Durability in simulated marine/industrial atmospheric corrosive environments |
VII. Significance of the Certification System for Project Selection
7.1 Compliance for Load-Bearing Structures
According to GB 50367-2013, mechanical anchors for load-bearing structures should be undercut anchors with interlock effect. The S-level anchor certification and ETA certification of Daring undercut anchors provide the compliance basis for their application in load-bearing structures. In load-bearing structures in seismic fortification zones, undercut anchors or special reverse-cone adhesive anchors should be used, and Daring undercut anchors meet this requirement.
7.2 Suitability for Cracked Concrete
S-level anchor certification proves that the Daring undercut anchor is suitable for cracked concrete. According to GB 50367-2013, the design calculation of anchor connections in load-bearing structures should adopt the cracked concrete assumption, without considering any capacity enhancement from non-cracked concrete. The S-level certification of the Daring undercut anchor and the cracked concrete suitability tests within ETA certification provide authoritative validation for its application in cracked concrete.
7.3 Dynamic Load and Seismic Scenarios
The 2 million cycle fatigue test and seismic test verify the reliability of Daring undercut anchors under dynamic loads and seismic action. The ultimate load capacity of undercut anchors is essentially unaffected by dynamic loading, with no slip risk, making them suitable for dynamic load scenarios such as rail transit, bridges, and industrial plants, as well as load-bearing structures in seismic fortification zones.
7.4 Adaptability to Corrosive Environments
Coating thickness testing and salt spray testing verify the durability of Daring undercut anchors in corrosive environments. For corrosive environments such as coastal high-salt-spray areas and industrial pollution, Daring undercut anchors offer 304/316 stainless steel options; the corrosion resistance life of 316 stainless steel is about 7 times that of hot-dip galvanizing, meeting long-term use requirements in harsh environments.
VIII. Frequently Asked Questions
| Q1 | What certifications has the Daring undercut anchor passed? The Daring undercut anchor has passed more than ten certifications, including EU ETA certification, S-level anchor certification, mechanical property testing, 2 million cycle fatigue testing, 120-minute fire resistance testing, high-temperature testing, seismic testing, coating thickness testing, salt spray testing, elongation testing, and thread precision testing. |
| Q2 | What does S-level anchor certification mean? According to JG/T 160-2017, S-level anchors are suitable for cracked concrete and seismic zones and represent the highest classification of mechanical anchors. The Daring undercut anchor has passed S-level certification, proving its suitability for cracked concrete and seismic fortification zones and meeting the requirements of GB 50367-2013 for anchors in load-bearing structures. |
| Q3 | What does ETA certification mean for project selection? ETA is the highest-level technical assessment certification in the EU, requiring full, rigorous testing covering tensile/shear load capacity, seismic performance, fatigue cycling, extreme salt spray corrosion, and cracked concrete suitability. The Daring undercut anchor has passed ETA certification, carrying international quality endorsement, and is suitable for foreign-related projects and high-end projects with international certification requirements. |
| Q4 | What does the 2 million cycle fatigue test verify? The 2 million cycle fatigue test verifies the durability of Daring undercut anchors under long-term cyclic loading. Under dynamic loads such as wind loads, train vibrations, and equipment operation, anchors must withstand millions of stress cycles without fatigue failure, making them suitable for dynamic load scenarios such as rail transit, bridges, and industrial plants. |
| Q5 | What project scenarios is the Daring undercut anchor suitable for? Daring undercut anchors are suitable for various anchoring scenarios including curtain walls, steel structures, heavy equipment, rail transit, tunnel utility corridors, and nuclear power projects, and are especially suitable for demanding conditions such as load-bearing structures, cracked concrete, seismic fortification zones, dynamic load environments, and small edge distance/narrow edge members. |
Built around pure mechanical interlock, the Daring undercut anchor has passed more than ten authoritative certifications including EU ETA certification, S-level anchor certification, mechanical property testing, 2 million cycle fatigue testing, 120-minute fire resistance, high-temperature testing, seismic testing, coating thickness testing, salt spray testing, and elongation and thread precision testing. The series covers M8-M20 sizes, with materials including grade 5.8 and grade 8.8 carbon steel (hot-dip galvanized 45 um or thicker) and 304/316 stainless steel, supplied with original undercut drill bits and electric installation tools. For undercut anchor selection and certification documentation for a specific project, please consult the Daring technical team.
References
JG/T 160-2017, Mechanical Anchors for Concrete - S-level anchor certification requirements
GB/T 3098.1-2010, Mechanical Properties of Fasteners - Bolts, Screws and Studs - basis for mechanical property, elongation, and thread precision testing
GB 50367-2013, Design Code for Strengthening Concrete Structures - anchor selection provisions for load-bearing structures
Daring website - Undercut Mechanical Anchor product page
Daring website - Differences Between Undercut Anchors and Expansion Anchors
Daring website - Differences Between Expansion Anchors and Undercut Anchors
