Back Bolts

The Daring back bolt series covers hammer-in, screw-in, cast-in (dedicated to honeycomb aluminium panels) and high-load back bolts, made of 304/316 stainless steel. Mechanical locking achieves stress-free dry-hung anchoring of exterior wall panels. Supplied with dedicated drilling machines and 6063-T6 aluminium alloy pendants, the series offers excellent seismic performance and suits panels of various thicknesses as well as substrates such as honeycomb aluminium panels. It is widely used in dry-hung cladding scenarios including curtain walls, rail transit and prefabricated buildings.

Hammer-In Back Bolt

Hammer-in back bolts are mainly used for dry-hung cladding of exterior wall panels. Panels are generally anchored by mechanical interlocking and connected to the concrete structure with aluminium alloy pendants. Materials are available in A2 (304) and A4 (316) stainless steel.

Views: 0

Product Information

  • Material

    304
    316

    Components

    Threaded rod
    Sleeve
    Expansion segment
    Flat washer / large washer
    Spring washer
    Hex nut

    Sizes

    M6
    M8

    Embedment depth

    15mm
    18mm

    Manufacturing standard

    GB/T 16938-2008
    GB∕T 3098.1-2010
    GB/T 3103.1-2002
    GB/T 3103.3-2020
    GB/T 5783-2016
    GB/T 97.1-2002
    GB/T 96.1-2002
    GB 93-1987
    GB/T 6170-2015

    Installation method

    Hammer-in
    Power-driven screwing

    Certification and testing

    Mechanical properties
    ETA
    Material test
    Salt spray test
    Seismic test

  • Suitable for panels 25 mm and thicker with good anchoring performance

    Daring back bolts can be used on panels 20 mm and thicker, available in M6 and M8 sizes, and are more friendly to harder panel materials.

  • Six-segment expansion design for improved safety

    The unique six-segment expansion design locks the back bolt firmly into the panel after installation, delivering excellent load capacity.

  • Passed the seismic test for rare earthquakes at intensity 9 by Tongji University

    Select back bolts of different materials according to site conditions; back bolts in S316 material offer better corrosion resistance.

  • Matching installation tools for worry-free installation

    Daring hammer-in back bolts have fully passed the seismic test for rare earthquakes at intensity 9 conducted by Tongji University, with acceleration up to 1.24g and outstanding seismic performance.

  • Hole-gauging tools provided to ensure drilling pass rates

    Daring's exclusive hole gauge rod is used to check whether the back bolt hole depth meets requirements, and the hole gauge is used to check whether the undercut drilling is in place.

  • Large hole tolerance, safety factor increased by 80%

    Compared with screw-in back bolts, it places lower demands on panel hole drilling, making installation simpler and safer.

  • Paired with 6063-T6 aluminium alloy pendants

    Daring supplies the corresponding high-quality aluminium alloy pendants, so you get a well-balanced, safe and cost-effective solution without spending extra time and effort.

Technical Data

How to Install

Hammer-In Back Bolt Installation Steps

Back to Back Bolts  Back to Daring Home  Back to Top