Product Knowledge

How angle brackets and back bolt pendants work together in curtain wall projects

Views: 0Posted on: 2026-08-26

To start with the conclusion: In curtain wall projects, angle brackets and back bolt pendants are used together, with neither dispensable. The back bolt pendant connects panels (stone, sintered stone, ceramic panels, etc.) to the angle bracket, while the angle bracket connects the back bolt pendant to the main structure (framing or embedded parts). Together, they form a complete curtain wall dry-hung system. Angle brackets provide structural support and adjustment functions, while the back bolt pendants provide stress-free anchoring, seismic resistance, and fatigue performance. Daring angle brackets and back bolt pendants are made of 6063-T6 high-strength aluminium alloy material with 304/316 stainless steel bolts, meeting the curtain wall requirements for seismic resistance, fatigue resistance, and long-term durability.

In curtain wall projects, angle brackets and back bolt pendants are the two most essential connecting components. Many designers and construction personnel do not fully understand how the two work together, which often leads to mismatched selections and incorrect installation sequences, compromising the safety and durability of the curtain wall system. This article systematically explains how angle brackets and back bolt pendants work together in curtain wall projects from multiple dimensions, including functional roles, coordination principles, selection points, and installation sequence.

1. Basic understanding of angle brackets and back bolt pendants

1.1 What is an angle bracket

An angle bracket is a transitional component in curtain wall projects used to connect the main structure with panel pendants. They are typically made of 6063-T6 high-strength aluminium alloy and formed by hot extrusion. Angle brackets generally have an L-shaped or Z-shaped cross-section, with one side connected to the main structure (mullions, transoms, or embedded parts) and the other side connected to the back bolt pendant.

Daring angle brackets come with 304 stainless steel adjustment bolts, providing three-way adjustment in the front-back, left-right, and up-down directions to effectively absorb construction tolerances of the main structure and ensure the flatness and installation accuracy of curtain wall panels.

1.2 What is a back bolt pendant

A back bolt pendant is an intermediate component that connects back bolts and angle brackets, typically consisting of a aluminium alloy pendant body and stainless steel fastening bolts. One end of the pendant connects to the back bolt installed in the panel and the other end connects to the angle bracket, transferring panel loads to the main structure.

Daring back bolt pendants are made of 6063-T6 aluminium alloy material with 304/316 stainless steel bolts, offering height adjustment and front-back adjustment, suitable for panels of different thicknesses and back bolts of different sizes. Daring offers three types—hammer-in back bolt pendants, screw-in back bolt pendants, and anti-loosening back bolt pendants—corresponding to different panels and service conditions.

2. How angle brackets and back bolt pendants work together

2.1 Complete load path of the curtain wall dry-hung system

In a curtain wall dry-hung system, the load transfer path is:Panel → back bolt → back bolt pendant → angle bracket → main structure (framing / embedded parts). Back bolt pendants and angle brackets each perform a different level of connection function, and neither is dispensable. The pendant addresses the connection between panel and connector, while the angle bracket addresses the connection between connector and main structure.

2.2 Functional role of the angle bracket

  • Structural connection: transferring pendant and panel loads to the main-structure framing or embedded parts

  • Three-way adjustment: fine adjustment in the front-back, left-right, and up-down directions via adjustment bolts, absorbing construction tolerances of the main structure

  • Load conversion: converting loads transferred from panels into load patterns the main structure can carry

  • Seismic buffering: seismic washers installed at the angle bracket-pendant connection absorb deformation and energy during earthquakes

2.3 Functional role of the back bolt pendant

  • Back bolt connection: connecting to the back bolt installed in the panel to form a secure mechanical lock

  • Panel fixing: firmly securing panels in the curtain wall system to withstand wind and seismic loads

  • Stress-free installation: hung in place, avoiding additional stress on panels

  • Height adjustment: fine adjustment of panel elevation via adjustment bolts on the pendant

2.4 How the two work together

The coordination between angle brackets and back bolt pendants can be understood intuitively as follows: the angle bracket is the "socket" and the back bolt pendant is the "plug". The angle bracket is fixed to the main structure and provides a standardized connection interface; the pendant is connected to the panel and then hung on or bolted to the angle bracket. The connection between the two should meet the following requirements:

  • Reliable connection: stainless steel bolts or hanging connections should be used between angle bracket and pendant to ensure no loosening or detachment under seismic and wind loads

  • Flexible adjustment: the connection between the two should offer multi-directional adjustment to absorb construction tolerances and thermal deformation

  • Corrosion-compatible materials: the materials of the angle bracket, pendant, and connecting bolts should be compatible to avoid galvanic corrosion

  • Sound load transfer: the angle bracket-pendant connection joint should reliably transfer tension and shear

3. Types and compatibility of angle brackets and back bolt pendants

3.1 Main types of angle brackets

Angle bracket typeFeaturesCompatible pendant type
Fixed angle bracketNo adjustment, simple structure, low costUsed with fixed pendants
One-way adjustable angle bracketAdjustable in a single direction (front-back or left-right)Used with adjustable pendants
Two-way adjustable angle bracketAdjustable in two directions (front-back and up-down)Used with adjustable pendants
Three-way adjustable angle bracketThree-way adjustment (front-back, left-right, up-down), high precisionUsed with any standard pendant

3.2 Main types of back bolt pendants

Pendant typeCompatible back bolt typeApplicable panels
Hammer-in back bolt pendantHammer-in back boltGranite ≥25mm
Screw-in back bolt pendantScrew-in back boltSintered stone / ceramic panels ≥12mm
Anti-loosening back bolt pendantAnti-loosening back bolt pendantStone / fiber cement panels ≥16mm
Cast-in back bolt pendantCast-in back boltComposite panels such as honeycomb aluminum panels

3.3 Compatibility principles for angle brackets and back bolt pendants

  • Dimension matching: the connection hole spacing of the angle bracket and the mounting hole spacing of the pendant should be consistent to ensure reliable bolted connections

  • Material matching: aluminium angle brackets should be paired with aluminium alloy pendants or pendants with insulation treatment to avoid galvanic corrosion between dissimilar metals

  • Adjustment range matching: the adjustment range of the angle bracket should be coordinated with that of the pendant to jointly meet installation accuracy requirements

  • Load matching: the load capacity of both the angle bracket and the pendant should exceed the design loads transferred from the panels, with safety factors meeting the requirements of the standards

4. Key points for construction coordination

4.1 Installation sequence

Angle brackets and back bolt pendants should be installed in the following sequence:

  • Step 1: Install the angle brackets—secure the angle brackets to the main structure (mullions, transoms, or embedded parts) with bolts or welding and make preliminary position adjustments

  • Step 2: Install the back bolts—drill and ream holes in the panels and install the back bolts

  • Step 3: Install the pendants—connect and secure the back bolt pendants to the back bolts

  • Step 4: Hang the panels—hang the panels with their pendants onto the angle brackets

  • Step 5: Adjust and position—use the adjustment functions of the angle brackets and pendants for fine three-dimensional positioning

  • Step 6: Tighten and secure—after positioning, tighten all bolts to complete the installation

4.2 Key control points

  • Angle bracket positioning accuracy: deviations in angle bracket installation position should be controlled within ±2mm to ensure the accuracy of subsequent panel installation

  • Connection between pendant and angle bracket: bolted connections should be torqued as specified in the design, neither too tight nor too loose

  • Insulating washers: insulating washers should be installed where aluminium contacts stainless steel to prevent galvanic corrosion

  • Seismic washers: in seismic fortification zones of curtain walls, seismic washers should be installed between the angle bracket and the pendant

  • Adjustment allowance control: after installation, a certain adjustment allowance should be retained to accommodate thermal deformation and structural settlement

5. Regulatory basis

The design, production, and installation of angle brackets and back bolt pendants should meet the following standards:

  • GB/T 21086-2007Building Curtain Walls — general technical requirements for curtain walls

  • JGJ 133-2001Technical Code for Metal and Stone Curtain Wall Engineering — dedicated standard for stone curtain walls

  • JGJ 336-2016Technical Code for Artificial Panel Curtain Wall Engineering — standard for artificial panel curtain walls

  • GB 50367-2013Design Code for Strengthening of Concrete Structures — post-installed anchoring requirements

  • JGJ 145-2013Technical Specification for Post-Installed Anchoring in Concrete Structures — back bolt anchoring requirements

Daring angle brackets and back bolt pendants are produced and tested strictly in accordance with the above standards, and the products comply with JG/T 560-2019 Cast-in Channel Inserts for Buildings, GB/T 38525-2020 Cast-in Channel Assemblies for Building Curtain Walls, and other standards.

6. Selection decision guide

Selection decision table for angle brackets and back bolt pendants

Panel typeRecommended angle bracket typeRecommended pendant typeRecommended back bolt type
Natural granite (≥25mm)three-way adjustable angle brackethammer-in back bolt pendanthammer-in back bolt
Sintered stone panels (12-20mm)three-way adjustable angle bracketscrew-in back bolt pendantscrew-in back bolt
Ceramic panels (≥12mm)two-way adjustable angle bracketscrew-in back bolt pendantscrew-in back bolt
Fiber cement panels (≥16mm)two-way adjustable angle bracketanti-loosening back bolt pendantanti-loosening back bolt
Honeycomb aluminum panelsone-way adjustable angle bracketcast-in back bolt pendantcast-in back bolt

7. Frequently asked questions

Q1Can angle brackets and back bolt pendants be purchased separately?
Purchasing them together is recommended. The dimensions, adjustment ranges, and connection methods of angle brackets and back bolt pendants must be compatible with each other; separate purchasing often leads to mismatch problems. Daring provides complete system solutions of angle brackets + back bolt pendants + back bolts to ensure perfect coordination between components.
Q2Are insulating washers required between angle brackets and back bolt pendants?
Yes. A potential difference exists between aluminium angle brackets and stainless steel pendants, and galvanic corrosion may occur in humid environments. Insulating washers (such as nylon or PE washers) should be installed between the two to effectively break the corrosion circuit.
Q3How do the adjustment functions of angle brackets and back bolt pendants differ?
Angle brackets mainly provide adjustment in the front-back (in-out) and left-right directions, and some also provide vertical adjustment; back bolt pendants mainly provide fine vertical adjustment of panel elevation. The two adjustment functions complement each other and jointly achieve precise three-dimensional positioning of panels.
Q4What materials are Daring angle brackets and back bolt pendants made of?
Daring angle brackets and back bolt pendants are both made of 6063-T6 high-strength aluminium alloy material, hot-extruded into shape, with surfaces that can be anodized or powder coated. The matching bolts are made of 304 or 316 stainless steel material and offer good corrosion resistance.
Q5What tests have Daring back bolt pendants passed?
Daring back bolt pendants, together with their matching back bolts, have passed 2 million-cycle fatigue testing, fire resistance testing, and seismic testing for rare earthquakes of intensity 9 (acceleration 1.24g), meeting the curtain wall requirements for seismic resistance, fatigue resistance, and long-term durability.

Daring angle brackets and back bolt pendants are made of 6063-T6 high-strength aluminium alloy with 304/316 stainless steel bolts, offer three-way adjustment, and are compatible with multiple back bolt types, including hammer-in, screw-in, anti-loosening, and cast-in. Daring provides complete curtain wall dry-hung system solutions, from back bolt selection and pendant configuration to angle bracket design. For selection advice on angle brackets and back bolt pendants for a specific project, please contact the Daring technical team.

References

Daring official website — Aluminium Alloy Pendant product page

Daring official website — Hammer-In Back Bolt product page

Daring official website — Screw-In Back Bolt product page

Daring official website — Applications and classification of back bolts

Daring official website — Hammer-in back bolt installation process and differences from screw-in back bolts

GB/T 21086-2007 Building Curtain Walls — general technical requirements for curtain walls

Back to Daring Home  Back to Top