Product Knowledge

C-type or ear-type pendant: which suits stone curtain walls better?

Views: 0Posted on: 2026-08-27

To start with the conclusion: C-type pendants and ear-type pendants are both widely used back bolt pendants in stone curtain wall projects, but there is no absolute answer as to which is better; it depends on the specific service conditions. Ear-type pendants, are the most widely used type, suitable for almost all thicknesses of stone and ceramic panels; the C-type (male-and-female) pendant features a flexible plug-in design, enabling quick installation and elegantly accommodating panel displacement and stress changes. In high-end projects, C-type pendants are favored for their higher overall strength; in conventional stone curtain walls, ear-type pendants win on value and versatility. Daring offers a full range of aluminium alloy pendants, including ear-type and C-type (male-and-female), primarily made of 6063-T6/T5 high-strength aluminium alloy with anodized surfaces, compatible with hammer-in and screw-in back bolts.In back bolt stone curtain wall projects, pendant selection directly affects the safety, durability, and construction efficiency of the curtain wall system. C-type pendants and ear-type pendants are the two most mainstream back bolt pendant types, but many designers and engineering professionals lack a deep understanding of their differences and applicable scenarios, often leading to selection deviations. This article comprehensively compares the two pendant types across dimensions including structural features, load-bearing performance, applicable scenarios, and cost, helping engineering professionals make informed selections.

In back bolt stone curtain wall projects, pendant selection directly affects the safety, durability, and construction efficiency of the curtain wall system. C-type pendants and ear-type pendants are the two most mainstream back bolt pendant types, but many designers and engineering professionals lack a deep understanding of their differences and applicable scenarios, often leading to selection deviations. This article comprehensively compares the two pendant types across dimensions including structural features, load-bearing performance, applicable scenarios, and cost, helping engineering professionals make informed selections.

1. What is an ear-type pendant? What is a C-type pendant?

1.1 Ear-type pendants

An ear-type pendant consists of an aluminium alloy body, three nylon strips (adhesive strips), and adjustment screws. Ear-type pendants come in two types: flat-ear pendants and concave-ear pendants. Flat-ear pendants are suitable for use with hammer-in and flush-style back bolts. For screw-in back bolts, machining a hexagonal hole in the flat-ear pendant also achieves an excellent match—the hexagonal head of a screw-in back bolt protrudes after installation, and a flat-ear pendant with a hexagonal hole perfectly accommodates this protrusion.

Daring flat-ear pendants are mainly used to connect dry-hung panels with installed back bolts to interlayer structural members. They are made of 6063-T6 or 6063-T5 aluminium profiles with anodized surfaces and good weather resistance. Ear-type pendants are simple to install with better bite force, widely suitable for all types of stone, and moderately priced.

1.2 C-type pendants (male-and-female pendants)

The C-type pendant, also called the male-and-female pendant, consists of two aluminium alloy bodies and adjustment screws. The C-type pendant adopts a flexible plug-in design with one male and one female piece, enabling quick installation and elegantly accommodating panel displacement and stress changes.

C-type pendants come in two versions: with and without cantilever. Cantilevered male-and-female pendants can be mounted directly on angle steel without the need for additional angle brackets, and they are widely used in high-end projects. Daring male-and-female pendants are mainly used to connect dry-hung panels with installed back bolts to interlayer structural members, belonging to the category of back bolt connectors.

2. Ear-type pendants vs. C-type pendants: a comprehensive multi-dimension comparison

Comparison dimensionEar-type pendantC-type pendant (male-and-female)
StructureAluminium alloy body + three nylon strips + adjustment screwsTwo aluminium alloy bodies (one male, one female) + adjustment screws
Connection methodSingle-piece hanging, clipped directly onto the back boltPlug-in design with male-and-female interlocking
Single-point load capacityExtremely strong, with extremely high versatilityStrong, with more uniform overall load distribution
Panel thickness adaptabilitySuits stone and ceramic panels of various thicknessesSuits stone and ceramic panels of various thicknesses
Displacement and stress adaptationAverageExcellent, elegantly accommodating displacement and stress changes
Compatible back bolt typesFlat-ear suits hammer-in and screw-in (with hexagonal hole)Both hammer-in and screw-in
Cantilever optionNo cantilever; requires angle bracketsCantilevered version mounts directly on angle steel
Installation speedFastFaster, plug-in design improves construction speed
CostModerately pricedHigher (the most expensive of the three pendant types)
Suitable projectsConventional stone curtain walls; projects with high versatility requirementsHigh-end projects; large-format panels; high-load projects

3. In-depth analysis of the core differences

3.1 Structural design differences

The ear-type pendant has a single-piece structure, consisting of an aluminium alloy body, three nylon strips, and adjustment screws. The back bolt clips directly onto the pendant, completing connector installation and anchoring in one step. This structure is simple and direct, easy to install, with good bite force.

The C-type pendant has a two-piece plug-in structure, divided into a male piece and a female piece (hence male-and-female type). During installation, the male and female pieces plug into each other, forming an interlock. This structural design gives C-type pendants a natural advantage in accommodating panel displacement and stress changes.

3.2 Load-bearing performance differences

The ear-type pendant's single-point load capacity is extremely strong, which is one of its greatest advantages. Each pendant bears load independently with a clear load path, suitable for stone of various thicknesses.

C-type pendants carry load through male-and-female interlocking, distributing loads more uniformly overall. Cantilevered C-type pendants can be mounted directly on angle steel, reducing angle bracket usage and further improving overall system strength. This is why high-end projects tend to favor C-type pendants—the strength of the entire dry-hung system improves accordingly.

3.3 Back bolt compatibility differences

Ear-type pendants are very flexible in back bolt compatibility:

  • flat-ear pendants: suit hammer-in back bolts; with a machined hexagonal hole, they can also match screw-in back bolts

C-type pendants are equally flexible in back bolt compatibility—both hammer-in and screw-in back bolts can be used. This versatility makes C-type pendants suitable for projects with different back bolt types.

3.4 Construction efficiency differences

Both pendant types are fairly easy to install, but the C-type pendant's plug-in design gives it a slight advantage in construction speed. The male and female pieces simply plug together to complete the connection, enabling modular installation and easier replacement and maintenance. Ear-type pendants are equally simple and quick to install, but must be hung one by one.

3.5 Cost differences

Cost is one of the most significant differences between the two. Ear-type pendants are moderately priced and offer good value for money, making them the most widely used in conventional stone curtain wall projects. The C-type pendant is the most expensive of the three pendant types, but the overall strength improvement and installation convenience it brings give it irreplaceable advantages in high-end projects.

4. Selection decision guide

Cases favoring ear-type pendants

  • Conventional stone curtain wall projects: where value for money is the priority, ear-type pendants are the most widely used type

  • Stone of various thicknesses: ear-type pendants suit stone and ceramic panels of various thicknesses

  • Cost-sensitive projects: ear-type pendants are moderately priced and economical

  • Use with hammer-in or screw-in back bolts: flat-ear pendants are compatible with both back bolt types

  • High versatility requirements: ear-type pendants are highly versatile, suitable for almost all scenarios

Cases favoring C-type pendants (male-and-female type)

  • High-end curtain wall projects: male-and-female pendants are widely used in high-end projects

  • Large-format stone panels: for large, heavy panels, C-type pendants offer higher overall strength

  • Scenarios requiring accommodation of displacement and stress: the plug-in design of C-type pendants elegantly accommodates panel displacement and stress changes

  • Desire to reduce angle bracket usage: cantilevered C-type pendants can be mounted directly on angle steel

  • Pursuit of higher installation efficiency: the plug-in design enables modular, rapid installation

  • Areas with high seismic fortification requirements: C-type pendants are more integral as a system and offer better seismic performance

Quick-reference selection decision table

Project characteristicsRecommended pendantRationale
Conventional stone curtain walls, 25mm graniteFlat-ear pendantHigh value, high versatility, largest shipment volume
High-end office buildings, large-format stone curtain wallsC-type pendantHigh overall strength, accommodates displacement and stress
Hammer-in back bolts + thick stoneFlat-ear pendantFlat-ear pendants best match hammer-in back bolts
Screw-in back bolts + thin stone / ceramic panelsFlat-ear pendant (with hexagonal hole)Flat-ear pendants with hexagonal holes suit screw-in back bolts
Seismic fortification zones, high wind pressure areasC-type pendantMale-and-female interlocking structure offers better seismic performance

5. Standards and quality requirements

Whether ear-type or C-type pendants are chosen, they should meet the following quality requirements:

  • Material requirements: pendants should be made of 6063-T5 or 6063-T6 high-strength aluminium alloy, with high strength, good toughness, and high stability

  • Thickness requirements: quality aluminium alloy pendants should be about 4mm thick to ensure safety

  • Surface treatment: pendants should be anodized; a thicker oxide film provides better corrosion and wear resistance

  • Avoid inferior products: choose products from reputable manufacturers and avoid pendants made of recycled aluminium, whose insufficient strength creates safety hazards

The Daring aluminium alloy pendant range covers ear-type, male-and-female (C-type), H-type, SE combination, and cantilever combination pendants, primarily made of 6063-T6/T5 aluminium alloy and designed for back bolt dry-hung systems. All Daring pendants are about 4mm thick with anodized surfaces, ensuring safety performance.

6. Frequently asked questions

Q1Which is more suitable for stone curtain walls, the C-type pendant or the ear-type pendant?
There is no absolute answer. For conventional stone curtain walls, flat-ear pendants are preferred (high value and versatility); for high-end projects, large-format panels, or high seismic requirements, C-type pendants are preferred (high overall strength, accommodates displacement and stress).
Q2Can flat-ear pendants be used with screw-in back bolts?
Yes. By machining a hexagonal hole in the flat-ear pendant, it can perfectly match screw-in back bolts. The hexagonal head of a screw-in back bolt protrudes after installation, and a flat-ear pendant with a hexagonal hole can accommodate this protrusion.
Q3Why are C-type pendants more expensive than ear-type pendants?
C-type pendants use a two-piece plug-in structure (male-and-female type), requiring higher machining precision and more material, and the cantilevered version can be mounted directly on angle steel to reduce angle bracket usage. The overall cost is higher, but the resulting improvement in system strength is also more significant.
Q4What pendant products does Daring offer?
The Daring aluminium alloy pendant range covers ear-type, male-and-female (C-type), H-type, SE combination, and cantilever combination pendants, as well as angle brackets and corner connectors, primarily made of 6063-T6/T5 aluminium alloy with anodized surfaces.
Q5How to judge the quality of an aluminium alloy pendant?
First, check the material (whether it is 6063-T5/T6 aluminium alloy); second, the thickness (quality pendants are about 4mm thick); third, the surface treatment (whether anodized); fourth, the brand (choose reputable manufacturers and avoid recycled aluminium products).

The Daring aluminium alloy pendant range covers ear-type, male-and-female (C-type), H-type, SE combination, and cantilever combination pendants, as well as angle brackets and corner connectors, primarily made of 6063-T6/T5 aluminium alloy with anodized surfaces and designed for back bolt dry-hung systems. Daring offers integrated anchor and pendant solutions; its ear-type and C-type pendants precisely match its in-house screw-in and hammer-in back bolts. The Daring back bolt dry-hung system has passed the seismic test for rare earthquakes of intensity 9 at Tongji University and authoritative testing by the National Building Materials Testing Center. For pendant selection advice for a specific project, please contact the Daring technical team.

References

Daring official website — Ear-Type Pendant product page

Daring official website — Understanding curtain wall back bolt pendants

Daring official website — How to select aluminium alloy pendants for back bolts

Daring official website — Applications and classification of back bolts

GB/T 21086-2007 Building Curtain Walls — general technical requirements for curtain walls

Back to Daring Home  Back to Top