Product Knowledge

How to choose curtain wall back bolts: which is more durable, 304 or 316 stainless steel?

Views: 0Posted on: 2026-08-12

Here is the conclusion:Compared with 304 stainless steel back bolts, 316 stainless steel back bolts aremore durable, especially in corrosive environments such as coastal areas, high salt spray, and industrial pollution. 316 stainless steel contains2%~3% molybdenum (Mo), which greatly improves its resistance to chloride corrosion, with a Pitting Resistance Equivalent Number (PREN) ≥ 24 and seawater corrosion resistance significantly better than 304 (significantly better than 304).Seaside projects and outdoor open-joint curtain walls must use 316, while 304 is sufficient for ordinary inland indoor environments.

In curtain wall projects, the back bolt serves as the core anchoring component that fastens facing materials such as stone, ceramic panels, and metal panels to the building structure, and its material selection directly affects theservice life and safety of the entire curtain wall system.. Currently, the mainstream back bolt materials on the market are 304 stainless steel and 316 stainless steel. So what exactly is the difference between the two? Which is more durable? This article provides a systematic comparison in terms of composition, corrosion resistance, application scenarios, and price.

1. Composition difference: 316 contains additional "molybdenum"

The most fundamental difference between the two stainless steels lies in theirchemical composition。

Comparison dimension304 stainless steel (A2)316 stainless steel (A4)
Chromium (Cr) content≥18%≥16%
Nickel (Ni) content≥8%≥10%
Molybdenum (Mo) contentNone2%~3%
Corresponding grade0Cr18Ni90Cr17Ni12Mo2

The core advantage of 316 stainless steel lies inthe addition of molybdenum. Molybdenum significantly improves the corrosion resistance of stainless steel against chloride ions (Cl⁻) and sulfur-containing media (SO₄²⁻). It is precisely this 2%~3% of molybdenum that determines theessential advantage of 316 in corrosive environments。

2. Corrosion resistance: 316 is significantly higher than 304

2.1 Pitting Resistance Equivalent Number (PREN value)

PREN (Pitting Resistance Equivalent Number) is a core indicator of a stainless steel's pitting corrosion resistance; the higher the value, the better the pitting resistance.

MaterialPREN valueDescription
304 stainless steelApprox. 19Baseline level
316 stainless steel≥24Seawater corrosion resistance is significantly better than 304

2.2 Performance in different environments

304 stainless steel: has good corrosion resistance and is suitable forgeneral environments. In indoor, dry environments free of corrosive media, 304 can meet normal durability requirements. 304 stainless steel is widely used in building applications such as curtain walls, side walls, and roofs.

316 stainless steel: performs excellently inharsh environmentssuch as high salt spray and high humidity, for example coastal areas or chemical plants. Compared with 304 stainless steel, 316 stainless steelhas particularly good resistance to atmospheric corrosion and can be used under demanding conditions such as coastal environments。

2.3 Key conclusions

  • Inindustrial environments containing chloride ions (Cl⁻) or sulfur dioxide (SO₂), 316 stainless steel back bolts are more suitable.

  • 304 stainless steel back boltsare not suitable for non-oxidizing acids and chloride-containing media.。

  • Inseawater regions, the chloride ion content in seawater is relatively high, and the corrosion resistance of 316 stainless steel is clearly superior to that of 304 stainless steel.

3. Application scenarios: when to use 304 and when to use 316?

(1) Cases where 304 stainless steel back bolts should be preferred

  • Indoor curtain wallsoroutdoor curtain walls inordinary inland areas

  • Environments that are dry and free of corrosive media

  • Projects with strict cost control requirements

  • Non-open-joint stone connections (back bolts not directly exposed to the atmosphere)

(2) Cases where 316 stainless steel back bolts must be used

  • Coastal areaprojects (within a certain distance of the coastline)

  • High salt spray environments(e.g., island and seaside buildings)

  • Industrial pollution areas(industrial environments containing chlorides or sulfur dioxide)

  • Outdoor open-joint stone connections(back bolts directly exposed to the atmosphere)

  • High humidity and frequent rainfallin outdoor environments

  • Curtain walls hung at greater heightsand areas exposed to long-term weathering by wind and rain

Core principle: use 304 stainless steel in ordinary inland environments; 316 stainless steel is mandatory in highly corrosive coastal environments.

Daring back bolts are available in two stainless steel grades, A2 (304) and A4 (316), allowing designers to select the appropriate grade based on the environmental corrosion level of the project location.

4. Price difference: what makes 316 more expensive?

MaterialReference price (CNY/set)Value positioning
304 stainless steel back boltApprox. 3-7 CNY/setHigh value for money, suitable for general environments
316 stainless steel back boltApprox. 5-12 CNY/setHigher price, but superior durability

The above are market reference prices for standard M6 specifications; actual prices fluctuate with back bolt specification (M6/M8), embedment length, brand, and order volume. The price of a 316 stainless steel back bolt is approximately1.5 to 2 times that of 304. However, it is important to recognize that:In coastal or highly corrosive environments, 304 back bolts may show rust within a few years, while 316 maintains a good surface and structural strength for much longer. In terms oflife-cycle cost, the higher price of 316 buys a longer service life and lower maintenance costs.

5. Material identification: how to ensure you get genuine 304/316?

In actual procurement, beware of the following common misconceptions:

MisconceptionCorrect methods
Using a magnetto determine the material❌ Unreliable. Cold working (such as stretching or bending) can cause both 304 and 316 to develop weak magnetism; a magnet attracting the bolt does not prove it is not 304 or 316
Using stainless steel testing solution❌ Results are inaccurate; it can only qualitatively detect whether a single element is present
Testing only 3 elements(e.g., Cr/Ni/Mo)❌ Excessive levels of other elements (such as C) will affect overall performance
Testing only some components of the back bolt❌ Some vendors may pair 304 flat washers, spring washers, and nuts with a 316 threaded rod, compromising overall corrosion resistance

Recommendation:Require the supplier to providea complete third-party material test report, ensuring that all components (threaded rod, sleeve, expansion segments, flat washers, spring washers, nuts) are of the same material grade. Back bolts come in only two materials—304 and 316(L)—whose element proportions differ. When purchasing, choose a reputable manufacturer with proper qualifications, testing, and warranties.

6. Frequently asked questions

Q1How long can 304 stainless steel back bolts last in coastal areas?
In coastal environments with high salt spray, 304 stainless steel back bolts may develop rust spots within a few years. The actual service life depends on factors such as salt spray concentration, humidity, and maintenance frequency, but304 back bolts are not recommended for coastal projects; grade 316 should be selected instead.
Q2Do 316 stainless steel back bolts really never rust?
316 stainless steel offers extremely good corrosion resistance, but "never rusting" is relative. In extremely severe corrosive media, 316 can also suffer localized corrosion. However, in typical coastal and industrial atmospheres, 316 provides long-term, stable corrosion protection.
Q3Is there any difference in mechanical properties between 304 and 316?
The standard tensile strength values of the two are identical: both A2 (304) and A4 (316) are700MPa. Mechanical properties (load capacity) mainly depend on the back bolt size (M6/M8) and structural design, not on the material itself. Daring back bolts, whether in 304 or 316, are designed and manufactured to the same standards.
Q4How to determine whether a project needs 316?
Mainly based onthe environmental corrosion class of the project location. The following criteria can be used as reference:
• Distance from coastline:within 5 km→ 316 recommended
• Industrial pollution areas (near chemical plants or power plants) → 316 recommended
• Ordinary inland urban areas → 304 is sufficient
• Indoor environments → 304 is sufficient

7. Summary

Comparison dimension304 stainless steel (A2)316 stainless steel (A4)
Key compositionChromium + nickelChromium + nickel +molybdenum (2%~3%)
Pitting Resistance Equivalent Number (PREN)Approx. 19≥24
Seawater corrosion resistanceBaselineSignificantly better than 304
Suitable environmentsGeneral environments, indoor, ordinary inland areasCoastal areas, high salt spray, industrial pollution areas
Outdoor open-joint curtain walls❌ Not recommended✅ Recommended
Reference priceLower (approx. RMB 5-12/set)Higher (approx. RMB 10-20/set)
DurabilityGoodExcellent

Core selection principles:

  1. the environment determines the material: use 304 in ordinary inland areas,316 is mandatory in coastal/high-corrosion environments

  2. Use 316 directly for outdoor open-joint curtain walls: for projects where back bolts are directly exposed to the atmosphere, do not use 304 to save costs

  3. Think in terms of whole-life cost: 316 costs more, but in corrosive environments it lasts longer and has lower maintenance costs

  4. Choose reputable manufacturers and demand test reports: be alert to material adulteration and require a complete third-party material test report

  5. All components must be of the same material: the threaded rod, sleeve, expansion segments, flat washers, spring washers, and nuts should all be of the same material grade

Daring offers a full range of stainless steel back bolts in A2 (304) and A4 (316), covering hammer-in, screw-in, and cast-in types, together with dedicated drilling machines and 6063-T6 aluminium alloy pendants. Daring hammer-in back bolts have fully passed the intensity-9 rare earthquake seismic test at Tongji University, with acceleration reaching 1.24g. For back bolt material selection advice for specific projects, please contact the Daring technical team.

📎 References

1. Daring website — Hammer-in Back Bolt product page(product technical parameters and material description)

2. Daring website — Screw-in Back Bolt product page(product specifications and material description)

3. Daring website — Cast-in Back Bolt product page(product information and material description)

4. Daring website — What Tests Should Be Done Before Back Bolts Are Installed(material test methods and common misconceptions)

5. Daring website — How to Select Back Bolt Specifications for Dry-Hung Tile(material selection advice)

6. Daring website — Stone Back Bolt Hammer-in Back Bolt product page(product specifications and certification reports)

7. Technical Specification for Metal and Stone Curtain Wall Engineering, JGJ133 (national standard)

Back to Daring Home  Back to Top