Because back bolts are actually non-standard products with only corresponding minor industry standards, the types and operating methods of back bolts vary from manufacturer to manufacturer. However, to ensure safety, back bolts from any manufacturer need to undergo corresponding performance testing.
Material reports are indispensable
A back bolt consists of many components, generally including a threaded rod, expansion ring (expansion segment), sleeve, flat washer, spring washer, and nut. Among these, the flat washer, spring washer, and nut are standard parts, which back bolt manufacturers generally purchase directly from standard parts suppliers.
As we know, there are only two materials used for back bolts at present: 304 and 316 (L). The element proportions of the two differ to some extent. Some merchants, in order to purchase cheaper materials, deliberately select steel with substandard element content for processing, and some even use 201 steel or iron to produce back bolts. Just imagine what unforeseen things could happen if such back bolts were used on a curtain wall.
There are the following misconceptions about material testing:
(1)Using a magnet to attract—this is the least accurate method. Stainless steel may have weak magnetism when not demagnetized, and the fact that a magnet can attract a back bolt does not mean it is not made of 304 or 316.
(2)Using stainless steel testing solution—this method tests for a single element. Leaving aside the issue of how to use it, its test results are often inaccurate and the accuracy of the measured content is not high; it is mostly used to detect the presence of a particular element. For example, the special element Mo in 316 material is the biggest difference from 304 material.
(3)Testing of single-element content. In many cases, in order to complete testing faster and save costs, purchasers choose only three or fewer important elements for sample testing—for example, testing only Cr/Ni/Mo for 316. Although this method can test the important elements, it cannot verify the content of other elements; for instance, excessive C, the most basic element, affects the overall brittleness. Therefore, this method carries certain risks.
(4)Testing only some components of the back bolt. This method is more likely to play into the hands of certain manufacturers: some merchants may use 304 flat washers, spring washers, and nuts when supplying 316 back bolts, which also has a significant impact on the overall corrosion resistance, especially in coastal areas. Therefore, testing only some components also carries certain risks.
Mechanical properties are important
This is the most important point in on-site use: good load performance is required for dry-hung cladding, and load performance is often closely related to the back bolt, the hole dimensions, and tolerance fit https://www.daring021.com/article/1621.html. More than half of the manufacturers producing back bolts may not understand back bolt technology and have no awareness of tolerance control, so the quality of each batch naturally varies. In fact, every manufacturer should establish corresponding standards for back bolt dimensions and for hole position dimensions, so as to reduce fit errors and lower the probability of problems.
When purchasing back bolts, purchasers must conduct tests first and only discuss price after confirming good and stable load performance. Most manufacturers can provide entrusted test reports issued by third-party testing institutions, but this does not mean that the back bolt has stable load performance, nor that it is suitable for the panels used in the current project. If testing cannot be done on site, purchasers can certainly bring their own samples to the back bolt manufacturer for testing to ensure absolute safety.
How seismic performance is demonstrated
Very few back bolt brands have seismic test reports, and even fewer among domestic brands. In some earthquake-prone areas, seismic performance is particularly important. A seismic report can strongly demonstrate the seismic performance of a back bolt, and earthquakes themselves are graded; if manufacturers can issue complete seismic reports, purchasers can judge which brand has better seismic performance based on the earthquake level used in the test.
It is worth noting that some back bolts on the market are named 'seismic back bolts', with merchants claiming excellent seismic performance. However, purchasers are not fools: if it is a 'seismic back bolt', please present test evidence—after all, how could seismic performance be determined by name alone? In fact, based on the author's many years of experience, as long as the back bolt dimensions are qualified, back bolts that do not use epoxy resin anchoring adhesive to fill the back bolt holes have good seismic performance. However, qualified back bolt dimensions are themselves difficult for many manufacturers to achieve.
