To start with the conclusion:Whether to choose a benchtop or a portable (handheld) drilling machine for stone back bolts primarily depends onthe construction scenario. For on-site construction, small-area work, and later hole modification, choose theportable (handheld) type, which is light, flexible, and has low site requirements; for batch processing at stone fabrication plants and large-area uniform drilling, choose thebenchtop type, which offers high precision, high efficiency, and a low cost per hole.In most actual projects, portable back bolt drilling machines are used far more widely than benchtop models。
In dry-hung stone curtain wall construction, back bolt drilling is the key process that determines anchoring quality. There are many types of back bolt drilling machines on the market, which are mainly divided by size and appearance intoportable (handheld) machinesandbenchtop machines. So what is the difference between the two, and which is more practical? This article provides a systematic comparison in terms of construction scenario, drilling precision, applicable panels, and cost.
1. Basic overview of the two types of drilling machines
A back bolt drilling machine is a drilling device specifically designed for back bolt installation. It drills holes of specific shapes and dimensions in the back or side of materials such as stone, ceramic tiles, and precast concrete panels, and is mainly used in back bolt curtain wall systems such as dry-hung stone curtain walls. The machine uses a special multi-stage stepped drill bit to produce a stepped straight hole with a conical bottom that precisely accommodates the expansion sleeve of the back bolt.
By size and installation method, back bolt drilling machines fall into the following two categories:
| Comparison item | Portable (handheld) | Benchtop |
|---|---|---|
| Weight | Approx. 11-12 kg | 300-850kg |
| Voltage | 220V | 220V |
| Power | 1400 W (input) / 820 W (output) | 1.5 kW × 2 (twin-head) |
| Speed | Approx. 9300 r/min | Adjustable |
| Typical applications | On-site construction, hole modification, small-area work | Stone plant batch processing, large-area construction |
2. Portable vs benchtop: a full comparison
2.1 Site requirements
Portable back bolt drilling machine: small footprint and low site requirements. The whole machine weighs only about 11 kg, is very easy to move around, and is suitable for complex working conditions.
Benchtop back bolt drilling machine: large footprint and high site requirements. The whole machine can weigh 300-850 kg, is difficult to move, and is not convenient to relocate once installed.
2.2 Drilling precision
Portable back bolt drilling machine: drilling uses theback of the panel as the datum; panel thickness variations cannot be compensated for, and drilling precision is strongly affected by human factors.
Benchtop back bolt drilling machine: drilling uses thefront of the panel as the datum, which eliminates panel thickness variations and delivers higher drilling precision. The drilling depth is calculated from the lower surface of the panel, giving more accurate holes for panels of relatively uniform thickness.
2.3 Applicable panels and scenarios
Portable back bolt drilling machine: suitable for scenarios where panel dimensions and hole positions arenon-uniform and is suited to small-area work or later hole modification. Portable back bolt drilling machines are generally used for on-site construction.
Benchtop back bolt drilling machine: suitable for scenarios where panel dimensions and hole positions areuniform and is suited to large-area batch processing, mostly for large-scale work at stone plants. The Daring Type C benchtop back bolt drilling machine handles high-volume back bolt drilling.
2.4 Integration and accessories
Portable back bolt drilling machine: auxiliary equipment such as a vacuum pump and water pump must be purchased separately.
Benchtop back bolt drilling machine: integrates the supporting auxiliary equipment and is ready to use out of the box.
2.5 Cost
Portable back bolt drilling machine: relatively low price and low equipment investment. Reference price: approx. 2,500-4,100 CNY per unit.
Benchtop back bolt drilling machine: higher price and larger equipment investment, but a lower cost per hole, making it suitable for high-volume production.
3. Comparison table of the two drilling machines
| Comparison item | Portable (handheld) | Benchtop |
|---|---|---|
| Structural design | Compact and lightweight | Well arranged and highly integrated |
| Site requirements | Low | High |
| Drilling datum | Back of panel | Front of panel |
| Drilling precision | Strongly affected by human factors | Higher; eliminates panel thickness variations |
| Typical applications | On-site construction, hole modification, small areas | Factory batch processing, large areas |
| Machine weight | Light (approx. 11 kg) | Heavy (300-850 kg) |
| Machine price | Lower | Higher |
Core principle: choose the portable type for on-site construction, small-area work, and later hole modification; choose the benchtop type for batch processing at stone plants and large-area uniform drilling.
4. Straight drilling vs swing drilling: the difference in drilling principle
In addition to classification by size, back bolt drilling machines can also be divided by drilling action intostraight-drillandswing-drilltypes. Both types are used in benchtop and portable machines.
| Comparison item | Straight-drill | Swing-drill |
|---|---|---|
| Size and weight | Smaller | Larger |
| Motor speed | Higher | Lower |
| Drill bit type | Brazed drill bit | Electroplated drill bit |
| Hole completion speed | 6-12 seconds | 10-18 seconds |
| Drill bit replacement frequency | Low | High |
As the comparison shows, the straight-drill back bolt drilling machine is superior to the swing-drill type in terms ofhole completion speed, drill bit replacement frequency, and size and weight, and is the mainstream choice on the market today. The Daring straight-drill back bolt drilling machine works with brazed drill bits to complete holes in one smooth operation, with no need to separately adjust bit eccentricity.
5. Selection decision guide
(1) Cases where a portable back bolt drilling machine is preferred
On-site construction: drilling panels directly at the job site
Small-area work: limited workload that does not require large-scale batch processing
Later hole modification: installed panels need additional or adjusted hole positions
Non-uniform panel dimensions: hole positions and dimensions differ from panel to panel
Restricted site: cramped site with no room for large equipment
(2) Cases where a benchtop back bolt drilling machine is preferred
Batch processing at stone plants: drilling large numbers of panels uniformly in the factory
Large-area construction: huge workloads requiring efficient batch operations
Uniform panel dimensions: all panels have the same specifications and hole positions
Extremely high precision requirements: panel thickness variations must be eliminated and maximum drilling precision is required
Lowest cost per hole: in high-volume production, the cost per hole is lower
6. Frequently asked questions
| Q1 | Can a portable back bolt drilling machine be used directly on site? Yes. The portable back bolt drilling machine is designed specifically for on-site construction. Weighing only about 11 kg, it is very easy to move and has low site requirements. Portable back bolt drilling machines are generally used for on-site work. |
| Q2 | Why is a benchtop back bolt drilling machine heavier? A benchtop back bolt drilling machine integrates the motor, depth control, and auxiliary equipment into one unit, with a more complex and robust structure. Weighing 300-850 kg, it is designed for fixed locations and provides higher drilling precision and stability. |
| Q3 | Which is better, straight-drill or swing-drill? The straight-drill back bolt drilling machine outperforms the swing-drill type in hole completion speed (6-12 seconds vs 10-18 seconds), drill bit replacement frequency (low vs high), and size and weight (small vs large). The straight-drill type is the mainstream choice on the market today. |
| Q4 | What parameters should be considered when buying a back bolt drilling machine? Focus mainly on: working mode (manual/automatic), motor brand (such as well-known brands like Bosch of Germany), power, speed, machine weight, voltage, applicable hole diameter range, and compatible drill bit type. We also recommend choosing products from reputable manufacturers to ensure quality and after-sales service. |
| Q5 | How much does drilling precision differ between portable and benchtop machines? The portable type uses the back of the panel as the datum and cannot eliminate panel thickness variations, so precision is strongly affected by human factors. The benchtop type uses the front of the panel as the datum, eliminates panel thickness variations, and achieves higher drilling precision. For projects with extremely high precision requirements, benchtop equipment is recommended. |
7. Summary
| Comparison item | Portable (handheld) | Benchtop |
|---|---|---|
| Best use scenario | On-site construction, hole modification, small areas | Stone plant batch processing, large areas |
| Drilling precision | Good (affected by human factors) | High (eliminates panel thickness variations) |
| Portability | High (approx. 11 kg) | Low (300-850 kg) |
| Equipment cost | Lower | Higher |
| Cost per hole | Higher (small volumes) | Low (large volumes) |
| Market usage | Large (far greater than benchtop) | Smaller |
Core selection principles:
Scenario determines type: portable for on-site construction, benchtop for batch processing at stone plants
Choose benchtop for high precision: the benchtop type uses the panel front as the datum and eliminates panel thickness variations
Prefer straight-drill: faster hole completion, lower drill bit replacement frequency, and the mainstream market choice
Check key parameters: motor brand, power, speed, applicable hole diameter range, and more
Choose a reputable manufacturer: to ensure equipment quality, after-sales service, and spare parts supply
Daring offers a full range of back bolt drilling machines in both portable and benchtop types, with dedicated brazed drill bits and 6063-T6 aluminium alloy pendants. The Daring portable back bolt drilling machine weighs only 11 kg and features a straight-drill design that completes holes in one smooth operation, while the benchtop twin-head back bolt drilling machine handles high-volume back bolt drilling. For back bolt drilling machine selection advice for a specific project, please contact the Daring technical team.
📎 References
1. Daring official website — How to choose a back bolt drilling machine(portable vs benchtop comparison)
2. Baidu Baike — Back bolt drilling machine(product overview and classification)
3. Daring official website — Portable back bolt drilling machine product page(technical parameters and features)
4. Daring official website — Fully automatic benchtop twin-head back bolt drilling machine product page(technical parameters and applicable scenarios)
5. Comparison data for straight-drill and swing-drill back bolt drilling machines (industry-standard technical parameters)
