When doing dry-hung cladding of stone or ceramic tile, construction workers need to drill holes in the panels in advance to facilitate the installation of back bolts. There are also many types of drilling machines on the market, and choosing the right one can greatly improve work efficiency.
Types of back bolt drilling machines
1. According to portability, back bolt drilling machines can be divided into two types: benchtop back bolt drilling machines and portable back bolt drilling machines. Where they are used determines whether portability is important. Here is a brief list of the differences between the two:
Figure 1. Differences between portable and benchtop drilling machines
Drilling machine type | Portable back bolt drilling machine | Benchtop back bolt drilling machine |
Construction requirements | Small footprint, low requirements for the construction site | Large footprint, high requirements for the construction site |
Level of integration | Vacuum pump and water pump must be purchased separately | Integrated auxiliary equipment |
Drilling accuracy | Based on the back of the panel; cannot eliminate errors in panel thickness | Based on the front of the panel; can eliminate errors in panel thickness |
Applicable panels | Panels with non-uniform size and hole positions | Panels with uniform size and hole positions |
Applicability | Small-area work or hole modification | Large-area work |
From the table above we can see that the two types of back bolt drilling machines differ greatly in usage scenarios. Benchtop back bolt drilling machines are mostly used for large-area work in stone factories, and they also require uniform panel sizes and hole positions during construction.Generally, portable back bolt drilling machines are used for on-site construction.
2. According to the drilling principle, back bolt drilling machines can be divided into two types: straight-drill and swing-drill back bolt drilling machines, with the former having certain advantages in all respects.
Figure 2. Differences between straight-drill and swing-drill machines
Drilling machine type | Straight-drill back bolt drilling machine | Swing-drill back bolt drilling machine |
Weight and size | Light, small | Heavy, large |
Motor speed | High | Low |
Hole-making speed | 6-12s | 12-18s |
Drill bit type | Brazed drill bit | Electroplated drill bit |
Drill bit replacement frequency | Low | High |
P.S. When comparing the two, products of the benchtop or portable type are used for both.
As can be seen from the table,the straight-drill back bolt drilling machine makes holes faster and requires less frequent bit replacement, which can effectively improve work efficiency.
