Back bolt drill bits are the main consumable for drilling back bolt holes in stone and must be used with a back bolt drilling machine. The quality of the drill bit determines, to some extent, the number of holes that can be drilled in the stone.
Classification of back bolt drill bits
According to the manufacturing process, back bolt drill bits can be divided into two types: brazed drill bits and electroplated drill bits. The manufacturing process of brazed drill bits is more complex, with the bit part being cast, while electroplated drill bits have diamond grit attached to the bit surface by electroplating. The following table briefly describes the differences between the two:
Table 1. Differences between brazed and electroplated back bolt drill bits
Drill bit type | Brazed drill bit | Electroplated drill bit |
Manufacturing process | Complex | Average |
Matching drilling equipment | Straight-drill back bolt drilling machine | Swing-drill back bolt drilling machine |
Drilling speed | 6-12s | 12-18s |
Number of holes | Many | Few |
Drilling accuracy | Good | Average |
Because of the complexity of the manufacturing process, brazed drill bits can drill more than twice as many holes as electroplated drill bits, but their price is also about twice that of electroplated bits. In addition, because the straight-drill and swing-drill back bolt drilling machines work on different principles, their drilling accuracy differs; the straight-drill back bolt drilling machine using brazed drill bits produces more precise holes through eccentric motion.

Figure 1. Brazed drill bit (left) and electroplated drill bit (right)
Models of back bolt drill bits
There are many types of back bolts on the market, but their overall anchoring performance is very similar. Looking at the drilling for the representative screw-in, hammer-in, and anti-loosening back bolts, we can classify back bolt drill bits as follows:
Table 2. Specifications of back bolt drill bits
Drill bit type | Back bolt specification | Drill bit specification | Drilling diameter (mm) | Drilling depth (mm) |
Screw-in back bolt drill bit | M6 | M7 | 7.3 | 7-15.5 |
M8 | M9 | 9.3 | 15-18.5 | |
Hammer-in / anti-loosening back bolt drill bit | M6 | M11 | 11.3 | 15-25.5 |
M8 | M13 | 13.3 | 15-25.5 |
Back bolt drill bits are named by drilling diameter. Screw-in back bolt drill bits are available in M7 and M9, while hammer-in / anti-loosening back bolt drill bits are available in M11 and M13.
How to select a back bolt drill bit
With the above knowledge, discussing how to select a back bolt drill bit becomes much simpler. First, we need to select the corresponding drill bit specification based on the type and specification of the back bolt, and then we can purchase directly from the manufacturer.
Generally, we can purchase these accessories directly from the back bolt manufacturer as a package; on the one hand, compatibility is better, and on the other hand, we should also get good after-sales service. Of course, if you are yourself quite familiar with back bolt machines,the author recommends directly purchasing a straight-drill back bolt drilling machine that uses brazed drill bits. Using brazed drill bits provides higher drilling accuracy and a lower frequency of bit replacement, which can effectively improve drilling efficiency and reduce construction costs to some extent.
