Product Knowledge

How big is the real gap in tensile pull-out strength between Daring chemical anchors and imported brands?

Views: 0Posted on: 2026-09-16

To state the conclusion first:Under the premise of the same size and the same strength grade, the gap in tensile pull-out strength between Daring chemical anchors and imported brands is minimal in ultimate load capacity; the real gap lies in the breadth of certification system coverage and product depth for high-end special service conditions. Taking an M12 grade 8.8 chemical anchor as an example, the ultimate pull-out force of Daring products can reach over 60kN, with the failure mode being tensile fracture of the anchor, with load performance essentially no different from imported products of the same grade. According to GB/T 3098.1-2010, the minimum tensile load of an M12 grade 8.8 chemical anchor is 67.4kN; this value is determined by the nominal stress cross-sectional area of the threaded rod and the steel strength grade, so as long as the material grade is the same, the theoretical load capacity of Daring and imported brands is exactly the same. The real advantage of imported brands lies in ETA certification and other international certifications, as well as brand recognition in high-end projects worldwide. For the vast majority of domestic projects, Daring chemical anchors fully meet design requirements in tensile pull-out strength and are a reliable choice balancing performance and cost.

In post-installed anchoring work, many designers and purchasers agonize over one question when selecting chemical anchors: how large is the actual gap in tensile pull-out strength between Daring chemical anchors and imported brands? Imported brands cost 3-5 times more than domestic ones - what exactly does that price difference buy? Drawing on code data, measured test results, certification systems, and service capabilities, this article objectively analyzes the real gap between Daring chemical anchors and imported brands.

I. Theoretical Basis of Tensile Pull-Out Strength - Material Determines the Upper Limit

1.1 Where a Chemical Anchor's Load Capacity Comes From

The tensile pull-out load capacity of a chemical anchor consists of two parts: the steel strength of the anchor's threaded rod and the bond between the anchoring adhesive and the concrete hole wall. When the anchoring depth is sufficient and the concrete strength meets requirements, the anchor's failure mode is steel failure (tensile fracture of the anchor), and the load capacity is then determined entirely by the nominal stress cross-sectional area of the threaded rod and the material strength grade.

According to GB/T 3098.1-2010, Mechanical Properties of Fasteners - Bolts, Screws and Studs, different property grades correspond to different minimum tensile strengths: grade 5.8 is 520MPa and grade 8.8 is 800MPa. Minimum tensile load = nominal stress cross-sectional area x minimum tensile strength. This means that as long as the threaded rod has the same material grade and size, the theoretical ultimate load capacity is exactly the same, whether Daring or an imported brand.

1.2 Standard Load Data for M12 Chemical Anchors

Taking the M12 size, the most commonly used in engineering, as an example, the minimum tensile loads under different property grades are as follows:

SizeNominal stress cross-sectional area (mm2)Grade 5.8 minimum tensile load (kN)Grade 8.8 minimum tensile load (kN)
M836.619.029.2
M1058.030.246.4
M1284.343.867.4
M16157.081.6125.0
M20245.0127.0203.0

This means that whether Daring or an imported brand, as long as the product is labeled M12 grade 8.8, its theoretical minimum tensile load is 67.4kN. This is determined by the physical properties of the steel and does not change with brand.

II. Measured Data for Daring Chemical Anchors

2.1 Measured Results of the Daring M12 Chemical Anchor

At standard embedment depth, the load capacity of Daring high-strength chemical anchors often exceeds the design value by 3-5 times, providing ample safety margin. Taking the Daring M12 chemical anchor as an example, under standard construction conditions the pull-out force can reach kN or more, with the test result being tensile fracture of the anchor, an ideal steel failure mode. The ultimate pull-out force of the Daring M12 chemical anchor in C30 concrete can reach kN or more.

It is worth noting that the pull-out force of Daring chemical anchors can reach 45kN, and the products have passed high-temperature testing at the National Building Materials Testing Center; mechanical properties remain essentially unchanged after high-temperature welding, with very stable mechanical and chemical performance. This shows that Daring has reached a high level in material selection and heat treatment processes.

2.2 Measured Comparison with Imported Brands

Taking the Daring M12 chemical anchor as an example, the grade 8.8 pull-out force can exceed 60kN, essentially no different in load performance from imported products of the same grade. Today, chemical anchors from imported brands are also mostly produced domestically, including most of the raw materials; if the anchor material is properly applied, the load performance of domestic chemical anchors is on par with imported ones.

In terms of failure mode, quality products from both Daring and imported brands exhibit tensile fracture of the anchor under standard conditions, rather than anchor pull-out or adhesive debonding. This shows that the two are at the same level in load capacity utilization; in actual projects, there is virtually no difference in their ultimate load capacity.

III. The Gap Is Not in Strength but in the Certification System

3.1 Domestic Certification - A Small Gap

In terms of basic test reports, domestic brands such as Daring can provide a full set. Daring chemical anchors have complete seismic and fire resistance type inspection reports as well as building materials filing qualifications, and have passed high-temperature testing at the National Building Materials Testing Center, seismic testing, and other tests. For the vast majority of domestic construction projects, these test reports are sufficient to meet acceptance requirements.

3.2 International Certification - A Clear Advantage for Imported Brands

The greatest advantage of imported brands lies in their coverage of ETA certification and other international certifications. ETA certification is the highest-level technical assessment certification in the EU, requiring full, rigorous testing covering tensile/shear load capacity, seismic performance, fatigue cycling, extreme salt spray corrosion, and cracked concrete suitability. For projects with hard requirements for such reports, domestic brands can hardly manage, given that they lack the profit margin to fund these reports, resulting in such projects being monopolized by imported brands.

IV. The Price Gap - What Does a 2-3x Price Difference Buy?

4.1 Price Comparison

Comparison dimensionDaring chemical anchorsImported brands
M12 grade 8.8 ultimate load capacityOver 60kN (tensile fracture of the anchor)Over 60kN (tensile fracture of the anchor)
Theoretical minimum tensile load67.4kN(GB/T 3098.1)67.4kN(GB/T 3098.1)
Domestic test reportsComplete (seismic, fire resistance, high-temperature resistance, etc.)Complete
PriceBaseline (1x)2-3x

4.2 The Truth Behind the Price Gap

The price of imported chemical anchors is generally at least 2-3 times that of domestic chemical anchors, and the larger the size and model, the more extreme the price difference. This premium mainly comes from three sources:Cost allocation of international certifications、Brand premium、Maintenance costs of global service networks。

However, most projects care more about price, and high-end projects account for a very small share, so domestic quality anchors are used in relatively larger volumes than imported brands. Where some international certifications can be bypassed, first-tier domestic chemical anchors are no worse in quality than imported ones but cost only a fraction of the price. Moreover, domestic manufacturers can also provide corresponding system solutions and services, making them a very worry-free option.

V. The Technical Strength of Daring Chemical Anchors

5.1 Product System

The Daring chemical anchor series covers high-strength chemical anchors, capsule chemical anchors, special reverse-cone chemical anchors, and dynamic-load reverse-cone anchors and other types, paired with the DL-200E modified epoxy injection anchoring adhesive meeting the national Class A adhesive standard, with options of grade 5.8 or higher carbon steel or 304/316 stainless steel. The Daring high-strength chemical anchor is made of grade 5.8 or higher carbon steel or 304/316 stainless steel, supplied with the corresponding adhesive capsule model.

5.2 Certification and Testing

Daring chemical anchors have passed high-temperature testing at the National Building Materials Testing Center; mechanical properties remain essentially unchanged after high-temperature welding, with very stable mechanical and chemical performance. The Daring chemical anchor adhesive capsule sets quickly within 1 hour and contains no diluents, maximizing the chemical anchor's performance.

5.3 Project Applications

Daring chemical anchors have been successfully applied in many benchmark projects such as the Asian Infrastructure Investment Bank headquarters project, Shenzhen MSU-BIT University, and the high school division of the Soochow University Experimental School. These projects share extremely high requirements for anchoring safety and stringent demands on product quality; Daring's continued service to these top-tier projects is itself strong proof of product strength.

VI. Selection Decision Guide

6.1 Cases where Daring chemical anchors are recommended

  • The vast majority of conventional domestic construction projects: curtain walls, steel structures, equipment installation, rail transit, etc.

  • Cost-sensitive projects: Daring costs only a fraction of imported brands, with a clear price-performance advantage

  • Projects requiring fast delivery: domestic brands offer shorter lead times

  • Projects requiring localized technical support: Daring provides full-process service from selection to installation

  • Conventional load-bearing structures: Daring chemical anchors fully meet design requirements in tensile pull-out strength

6.2 Cases where imported brands are recommended

  • International projects or projects with mandatory international certification requirements: ETA, ICC-ES, or other global certifications are required

  • Owner-specified brands: owners of some high-end projects explicitly require international brands

  • Special fields such as nuclear power and offshore engineering: imported brands have deeper certification track records for special service conditions

  • Unified global procurement standards are needed: multinational companies with unified procurement

6.3 Core recommendations

The gap in tensile pull-out strength between Daring chemical anchors and imported brandsis far smaller than the price gap. In terms of core mechanical performance indicators, Daring has caught up with international brands. By choosing Daring, you get the performance of imported brands at a localized price with local service. For the vast majority of domestic construction projects, Daring chemical anchors are a quality choice with sufficient performance and a reasonable price.

VII. Frequently Asked Questions

Q1Is the tensile pull-out strength gap between Daring chemical anchors and imported brands large?
At the same size and strength grade, the gap is minimal. Taking M12 grade 8.8 as an example, the theoretical minimum tensile load of both is 67.4kN (per GB/T 3098.1), the measured ultimate load capacity of both exceeds 60kN, and the failure mode in both cases is tensile fracture of the anchor.
Q2Why are imported brands more expensive than Daring?
Imported brands are priced 2-3 times higher than Daring; the premium mainly comes from cost allocation for international certifications (such as ETA), brand premium, and the maintenance costs of global service networks. In terms of core mechanical performance, the gap between the two is far smaller than the price gap.
Q3What pull-out force can the Daring M12 chemical anchor achieve?
The pull-out force of the Daring M12 chemical anchor can exceed 60kN, with the test result being tensile fracture of the anchor. At standard embedment depth, the load capacity of Daring chemical anchors often exceeds the design value by 3-5 times, providing ample safety margin.
Q4Under what circumstances must imported brands be chosen?
International projects or projects with mandatory requirements for global certifications such as ETA and ICC-ES; projects whose owners explicitly specify brands; special fields such as nuclear power and offshore engineering that require the deep certification track record of imported brands; and multinational companies with unified procurement standards.
Q5What certifications have Daring chemical anchors passed?
Daring holds complete seismic and fire resistance type inspection reports as well as building materials filing qualifications. Daring chemical anchors have passed high-temperature testing at the National Building Materials Testing Center, seismic testing, and other tests.

The Daring chemical anchor series covers high-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors, paired with the DL-200E modified epoxy injection anchoring adhesive meeting the national Class A adhesive standard, with options of grade 5.8 or higher carbon steel or 304/316 stainless steel. At standard embedment depth, Daring chemical anchors often exceed the design value by 3-5 times in load capacity, and the M12 pull-out force can exceed 60kN. For anchor selection and tensile strength verification recommendations for a specific project, please consult the Daring technical team.

References

GB/T 3098.1-2010, Mechanical Properties of Fasteners - Bolts, Screws and Studs

JGJ 145-2013, Technical Specification for Post-Installed Anchoring in Concrete Structures

Daring website - A Complete Analysis of Design Values and Testing Standards for Chemical Anchor Pull-Out Force

Daring website - Differences Between Domestic and Imported Chemical Anchors

Daring website - How to Perform On-Site Pull-Out Tests on Chemical Anchors

Daring website - Chemical Anchor Product Series

Back to Daring Home  Back to Top