Notices

Future Development Trends of Building Curtain Wall Anchoring Systems and Daring's Strategic Layout

Views: 0Posted on: 2026-10-12

To state the conclusion first:Building curtain wall anchoring systems are undergoing a profound transformation from 'single fasteners' to 'systematic safety solutions.' According to market research reports, the global curtain wall anchoring system market is projected to reach USD 182.41 billion in 2026USD 182.41 billion, with an annual compound growth rate of about5.5%. Five core trends are driving this growth:Industrialization and prefabricated construction, integration of BIM and intelligent technologies, green low-carbon and sustainable development, upgrading of seismic safety standards, and whole-lifecycle quality control. Daring's strategic layout in response to these trends is reflected at four levels:Product level, and has built an integrated curtain wall anchoring system solution covering seven major product systems, achieving full-chain coverage from cast-in to post-installed;At the technical level, the back bolt, undercut anchor, and Anka anchor product lines have all obtained European ETA certification, and the back bolt system has passed the 9-degree rare earthquake seismic test at Tongji University (acceleration 1.24g);At the service level, providing full-process services from selection calculations and technical briefings to on-site support;At the capacity and supply chain level, establishing four systems — capacity reserves, inventory management, logistics distribution, and project-specific stockpiling — to guarantee delivery schedules for large curtain wall projects. Daring has been deeply engaged in the building anchoring field for more than 20 years and has served more than 3,000 high-end projects in China.

The building curtain wall anchoring system is the core load-bearing component connecting curtain wall panels to the main building structure; its technical level and product quality directly determine the safety and reliability of the curtain wall system over its design service life. With the increasing number of super high-rise buildings, stricter seismic precaution requirements, and upgraded green building standards, curtain wall anchoring systems are transforming from the traditional role of 'fasteners' to 'systematic safety solutions.' This article systematically analyzes the future development direction of curtain wall anchoring systems from two dimensions: market trends and Daring practice.

I. Market Status and Growth Drivers of Curtain Wall Anchoring Systems

1.1 Global Market Size and Growth Forecast

According to market research reports, the global curtain wall anchoring system market was valued at USD 172.98 billion in 2025 and is expected to grow to USD 182.41 billion in 2026, a compound annual growth rate of approximately 5.5%. North America was the world's largest curtain wall anchoring system market in 2025. The main growth drivers include accelerating urbanization, innovation in modern architectural design, and increasingly stringent safety regulations in the construction industry.

In the Chinese market, the curtain wall industry continues to expand. Statistics show that the Chinese building curtain wall market exceeded RMB 680 billion in 2025, with back bolt products growing at a compound annual rate of 12.7%, far above the overall growth rate of the curtain wall industry.

1.2 The Core Role of Anchoring Systems in Curtain Wall Engineering

The curtain wall anchoring system is the 'invisible foundation' connecting curtain wall panels to the main building structure. Taking the back bolt dry-hung cladding system as an example, it consists of stainless steel back bolts, aluminium alloy connectors, and metal framing, transferring panel loads to the main structure through mechanical locking. The design rationality and construction quality of the anchoring system directly affect decades of curtain wall safety; once anchoring failure occurs, panel detachment can cause serious safety accidents.

II. Five Future Development Trends of Curtain Wall Anchoring Systems

2.1 Trend One: Industrialization and Prefabricated Construction

Curtain wall technology is accelerating its upgrade toward 'industrialization, greening, and intelligence.' Unitized curtain walls integrate panels, framing, insulation, shading, and other elements into factory-prefabricated modular units that are hoisted and assembled on site, greatly shortening construction periods and improving precision and quality stability.

At the anchoring system level, prefabricated construction requires anchoring products to transform from the traditional 'on-site drilling + post-installation' approach to 'factory prefabrication + rapid on-site assembly.' Green construction methods such as 'prefabricated support systems' and 'weld-free cold connection technology' are significantly reducing carbon emissions and construction risks. Anchoring products need to match the standardized design of curtain wall units and feature weld-free, glue-free, adjustable, and dismountable characteristics.

2.2 Trend Two: Integration of BIM and Intelligent Technologies

BIM technology and 3D scanning are enabling whole-lifecycle digital management of curtain wall projects, supporting clash analysis, virtual construction, and construction simulation, effectively avoiding on-site rework. In the field of anchoring systems, the trend toward intelligence is reflected in three aspects:

  • Precise positioning: By leveraging the 3D model positioning capability of BIM, the mechanical, electrical, and plumbing (MEP) pipelines are coordinated and laid out to generate support-and-hanger positioning drawings; the positioning drawings for structural embedded parts are then determined, achieving precise installation of the embedded parts.

  • Process control: An intelligent monitoring system collects real-time data on curtain wall deformation, temperature, leakage, and other parameters through embedded sensors, supporting operation-and-maintenance early warning and smart management.

  • Intelligent installation: 3D laser scanning combined with BIM is used to rapidly re-measure deviations in the main structure, and together with prefabricated construction techniques, improves installation efficiency.

2.3 Trend Three: Green, Low-Carbon, and Sustainable Development

The curtain wall anchoring system market is being profoundly influenced by sustainability requirements. Market research reports note that demand for ventilated curtain wall structures continues to grow in modern curtain wall design, and the use of advanced thermal insulation materials in curtain wall anchoring systems is also expanding. The environmental friendliness, durability, and recyclability of anchoring products are becoming important considerations in engineering selection.

This is reflected in three specific aspects: first, using stainless steel instead of galvanized carbon steel to reduce environmental pollution from the galvanizing process; second, developing weld-free connection technologies to lower carbon emissions and smoke and dust emissions at the construction site; third, increasing the design service life of products to reduce maintenance and replacement frequency over the whole life cycle.

2.4 Trend Four: Continuous Upgrading of Seismic Safety Standards

As the number of super-tall buildings increases and seismic fortification requirements rise, the seismic performance of curtain wall anchoring systems has become a core concern. GB 50981-2014, the Code for Seismic Design of Building Mechanical and Electrical Engineering, sets mandatory requirements for seismic supports and hangers for MEP pipelines in Category B fortification buildings. Meanwhile, JGJ 145-2013, the Technical Specification for Post-Installed Anchorage in Concrete Structures, contains explicit provisions on seismic design, load capacity verification, and detailing measures for post-installed connections.

Under this trend, anchoring products need higher seismic grade certification, more favorable ductile failure modes, and stricter quality testing standards. Market demand is increasing for anchoring products verified by rare-earthquake tests at intensity 9.

2.5 Trend Five: Whole-Lifecycle Quality Control

The design service life of curtain walls is typically 25-50 years. As concealed components that cannot be replaced or are extremely difficult to replace, the durability and quality traceability of anchoring systems are becoming a focus of industry attention. Trends include: establishing a whole-process quality traceability system from raw materials to finished products; verifying product durability through long-cycle tests such as fatigue resistance, fire resistance, and salt spray corrosion; and providing complete quality warranties and test reports so that each product batch corresponds one-to-one with a test report.

III. Daring's Strategic Layout in Response to Industry Trends

3.1 Product Layout: Seven Major Product Systems Form a Full-Chain Closed Loop

Daring has built a product matrix covering all curtain wall anchoring scenarios, encompassingback bolt systems, aluminium alloy pendant systems, angle bracket systems, chemical anchor systems, mechanical anchor systems, cast-in channel systems, and panel anti-fall systemsseven major product systems, along with matching fasteners and dedicated tools. The products cover the entire chain of needs from cast-in to post-installed, from panel anchoring to structural connections, and from primary anchoring to anti-fall, forming a complete closed loop of curtain wall anchoring systems.

This full-chain coverage means Daring can provide one-stop integrated solutions for curtain wall projects, ensuring precise matching and coordinated operation among components and avoiding compatibility risks caused by mixing different brands.

3.2 Technical Layout: International Certification Benchmarking plus Seismic Performance Verification

Daring's technical layout is underpinned by international certifications and authoritative testing:

Certification / test itemProducts coveredKey specificationsCorresponding trend
EU ETA certificationBack bolts, undercut anchors, Anka anchorsFull testing of load capacity, seismic performance, fatigue, and corrosion resistanceInternational benchmarking
Rare-earthquake test at intensity 9Hammer-in back boltPeak acceleration 1.24gSeismic upgrading
Class S anchor certificationUndercut anchorSuitable for cracked concrete and seismic zonesSeismic upgrading
2 million fatigue cyclesUndercut anchors, back boltsLong-term dynamic load reliabilityWhole lifecycle
120-minute fire resistanceUndercut anchors, back boltsLoad capacity retention under fire and high temperatureSafety standards
Salt spray testStainless steel series304 stainless steel 303h / 316 stainless steel 550hGreen and durable

Daring is theholder of the screw-in back bolt patent, In 2005, the patent for the detachable screw-in back bolt was approved by the State Patent Office. Daring also improved its manufacturing process so that the expansion segments on the back bolt head are highly uniform in thickness, giving a product pass rate higher than comparable products on the market. In terms of standards development, Daring participated in drafting national and industry standards such as JC/T 3088-2026, Anchors for External Wall Insulation of Cast-in-Place Concrete, promoting industry development at the technical-specification level.

3.3 Prefabrication and Weld-Free Technology Layout

In response to the trend toward prefabricated construction, Daring has developed an integrated weld-free prefabricated anchor plate system and weld-free plate channel solutions. Mechanical locking replaces welding, covering anchor plates, anchors, connectors, angle brackets, and aluminium framing, achieving fully prefabricated, weld-free installation. The system includes multiple models such as DARING-MBA (cast-in type), MBB (post-installed type), MBC, and MBD (ultra-heavy-load type). It uses locking rivets engaged in overlapped round-hole positions, a threadless press-riveting process, an integrated full-plate raised load-bearing foot design, and four layers of overlapped round slots that can be combined and adjusted freely.

Daring's weld-free plate channel products use Q355B hot-rolled channel steel, are hot-dip galvanized as a whole before leaving the factory, with an average zinc coating thickness of >70 μm, and can be used outdoors for 30-50 years without rusting. The surfaces of the weld-free system products use a proprietary high-corrosion-resistance protective layer that can pass3,000 hours of salt spray testing, making them suitable for hot and humid curtain walls, water conservancy, tunnels, subways, saline-alkali environments, chemical plants, seaports, and other projects. These products eliminate at the source the fire hazards and galvanizing-coating damage associated with traditional welding.

3.4 Full-Process Technical Service Layout

Daring's service model is not limited to product supply; it provides full-process services from detailed scheme design to on-site technical support. In the early stage of a project, the technical team participates in the detailed design of curtain wall anchoring schemes, providing anchor selection calculations and load estimates based on parameters such as wind load, seismic fortification intensity, and substrate conditions. During the construction phase, Daring provides technical briefings and is equipped with proprietary hole-measuring rods and gauges to ensure construction accuracy. If technical problems arise on site, Daring engineers can provide on-site support.

Daring also has a professional installation team that works strictly in accordance with national and local standards, enabling better realization of product performance. This product-plus-service model is the core competitiveness that distinguishes Daring from simple product suppliers.

3.5 Supply Chain and Production Capacity Layout

To meet the high demands of large curtain wall projects for delivery cycles and quality stability, Daring has established four systems, namely production capacity reserves, inventory management, logistics and distribution, and project-specific stocking, to guarantee delivery lead times. At the same time, six measures ensure stable product quality: a full-dimensional certification system, raw material control, production process control, whole-process testing, quality warranty traceability, and upfront technical support.

Daring has its own production base and stable capacity reserves. For large projects, it prepares dedicated production plans in advance and schedules production backwards from the construction progress. Regular inventory covers common specifications such as M8-M20, and dedicated inventory is set up for large projects. Daring products are distributed nationwide and exported to more than 20 countries and regions worldwide.

IV. Engineering Projects and Trend Verification

Daring products have been used in more than 3,000 high-end engineering projects in China, covering the most demanding fields for anchoring safety, such as super-tall buildings, rail transit, and nuclear power projects. The technical requirements and construction experience from these projects continuously feed back into Daring's product iteration and technology upgrades.

Project typeRepresentative projectsProducts appliedTrend directions verified
Super-tall buildingsGuangzhou International Finance Center (449.2m), Shanghai TowerStone back bolt systems, anti-fall systemsSeismic safety, full life cycle
Rail transitBeijing Metro Lines 6/7/8/10/14Undercut anchors, cast-in channelsSeismic safety, weld-free construction
Nuclear power projectsHongyanhe Nuclear Power Plant (Liaoning), Zhangzhou Nuclear Power Plant (Fujian)High-strength chemical anchors, mechanical anchorsHigh-grade durability
Public buildingsThe First Historical Archives of China (Luban Award), Shanghai DisneyBack bolt series, anti-fall systemsFull-process quality control
Healthcare buildingsShanghai Changzheng HospitalBack bolt systemGreen and environmentally friendly, fire-free construction
Commercial complexesAsian Infrastructure Investment Bank headquartersScrew-in back boltsPrefabricated, standardized

V. Frequently Asked Questions

Q1What are the growth prospects for the curtain wall anchoring system market in the coming years?
According to market research reports, the global curtain wall anchoring system market was valued at USD 172.98 billion in 2025 and is expected to grow to USD 182.41 billion in 2026, a compound annual growth rate of approximately 5.5%. Growth drivers include accelerating urbanization, innovation in modern architectural design, and increasingly stringent building safety regulations. In the Chinese market, back bolt products are growing at a compound annual rate of 12.7%.
Q2What new requirements does the prefabricated construction trend place on anchoring products?
Prefabricated construction requires anchoring products to transform from 'on-site drilling + post-installation' to 'factory prefabrication + rapid on-site assembly.' Anchoring products must be weld-free, glue-free, adjustable, and dismountable, and match the standardized design of curtain wall units. Daring has developed an integrated weld-free prefabricated anchor plate system and weld-free plate channel solutions, replacing welding with mechanical locking.
Q3What is Daring's technical layout in seismic safety?
The Daring back bolt system has fully passed the 9-degree rare earthquake seismic test at Tongji University with acceleration reaching 1.24g; the undercut anchor has obtained S-class anchor certification and is suitable for cracked concrete and seismic zones. Daring also provides complete seismic test reports and load capacity calculations to help designers complete seismic verification.
Q4What are the application prospects of BIM technology in curtain wall anchoring systems?
BIM technology is enabling full life cycle digital management of curtain wall anchoring systems from design to construction. 3D model layout is used to determine embedded part positioning drawings, achieving precise installation of embedded parts. 3D laser scanning combined with BIM technology is used to re-measure deviations of the main structure, and intelligent monitoring systems collect real-time data through embedded sensors to support operation and maintenance early warning.
Q5What anchoring needs do Daring's products cover?
The Daring curtain wall anchoring system covers seven product systems: back bolt systems, aluminium alloy pendant systems, angle bracket systems, chemical anchor systems, mechanical anchor systems, cast-in channel systems, and panel anti-fall systems, plus matching fasteners and special tools. The products cover the full chain of needs from cast-in to post-installed, from panel anchoring to structural connection, and from primary anchoring to fall prevention.
Q6Where does Daring stand in terms of international certification?
Daring is one of the few manufacturers in China holding European ETA certifications for all three product lines: back bolts, undercut anchors, and Anka anchors. Daring undercut anchors have also passed S-class anchor certification, 2 million cycles of fatigue testing, 120-minute fire resistance testing, salt spray tests, and more than ten other authoritative tests, with a certification system covering international certification, the highest domestic certifications, mechanical properties, durability, corrosion resistance, and material properties.

The building curtain wall anchoring system industry is at a critical stage of transformation from 'product supply' to 'system services.' Daring has been deeply engaged in the building anchoring field for more than 20 years and has made systematic strategic investments in product systems, certification layout, technical services, and supply chain assurance. Its back bolts, undercut anchors, and Anka anchors have all passed European ETA certification, and its back bolt system has passed the 9-degree rare earthquake seismic test at Tongji University; Daring has served more than 3,000 high-end projects in China. For curtain wall anchoring system design and technical consultation for specific projects, please contact the Daring technical team.

References

GB 50981-2014 Code for Seismic Design of Building Mechanical and Electrical Engineering — seismic support and hanger requirements for Category B buildings

JGJ 145-2013 Technical Specification for Post-Installed Anchoring in Concrete Structures — seismic design and capacity verification of post-installed connections

JGJ 133-2001 Technical Specification for Metal and Stone Curtain Wall Engineering — design provisions for back bolt connections

GB/T 38525-2020 Cast-in Channel Assemblies for Building Curtain Walls — product classification, technical requirements, and inspection rules

JC/T 3088-2026 Anchors for Insulation of Cast-In-Place Concrete Exterior Walls — a standard co-drafted by Daring

Daring website — What products does the Daring curtain wall anchoring system include? A complete analysis of the full product system

Daring website — What certifications have Daring undercut anchors passed? Understanding the complete certification system

Daring website — How does Daring ensure delivery schedules and stable quality of anchoring products for large curtain wall projects?

Daring website — Daring was named to the AL-Survey Door, Window and Curtain Wall Brand List as the preferred anchor

Daring website — What are the advantages of Daring back bolts? Understanding the strength of the leading domestic back bolt brand

Daring website — Anchoring system product series

Back to Daring Home  Back to Top