Here is the conclusion:Daring's integrated curtain wall anchoring system solution coversseven product systems: back bolts, aluminium alloy pendants, angle brackets, chemical anchors, mechanical anchors, cast-in channels, and panel anti-fall systems, together with matchingfasteners and special tools. The products coverthe full chain from cast-in to post-installed, from panel anchoring to structural connection, and from primary anchoring to anti-fall protection, forming a complete closed loop for the curtain wall anchoring system. Daring provides full-process service from product selection and calculation report preparation to technical disclosure and on-site technical support, ensuring that all components match precisely and work together, avoiding the fitting risks of mixing different brands.
In curtain wall engineering, an anchoring system is not a single product but a complete system of components working together. Daring has specialized in the building anchoring field for more than 20 years and has built a product matrix covering all curtain wall anchoring scenarios, able to provide one-stop integrated solutions for large curtain wall projects. This article systematically reviews the product composition of Daring's integrated curtain wall anchoring system solution, helping construction professionals gain a full understanding of Daring's product system.
1. Back bolt system — the core of panel anchoring
1.1 Hammer-in back bolts
A hammer-in back bolt consists of a threaded rod, expansion segments, a sleeve, and a flange nut, made of quality 304/316 stainless steel. It is mainly used for dry-hung cladding of natural stone and engineered panels with a thickness of 25mm or more. Daring hammer-in back bolts have fully passed the intensity 9 rare earthquake seismic test at Tongji University, with acceleration reaching 1.24g and outstanding seismic performance. Common specifications are M6 and M8, with embedment depths of 15mm and 18mm.
1.2 Screw-in back bolts
Screw-in back bolts are mainly used for anchoring thin panels such as ceramic tiles and other new exterior wall panels, with a minimum anchoring depth of 5mm, corresponding to a minimum panel thickness of 8mm. Daring holds the patent for the screw-in back bolt and improved the machining process so that the expansion segments on the back bolt head are highly uniform in thickness, with a product pass rate higher than comparable products on the market.
1.3 Cast-in back bolts
Cast-in back bolts are mainly used for dry-hung honeycomb aluminium panels and are cast in during panel fabrication. Daring cast-in back bolts are made of 304/316 stainless steel and are suitable for honeycomb aluminium panels and other composite panels.
1.4 High-load back bolts
High-load back bolts are suitable for curtain wall applications with heavy loads and demanding requirements. Made of 304/316 stainless steel, they achieve stress-free dry-hung anchoring of exterior wall panels through mechanical interlock.
2. Aluminium alloy pendant system — the hub connecting back bolts and angle brackets
Aluminium alloy pendants are the key hub connecting back bolts and angle brackets: one end connects to the back bolt installed in the panel and the other connects to the angle bracket, transferring panel loads to the main structure. Daring's aluminium alloy pendant products cover the following mainstream types:
2.1 Ear-type pendants
Ear-type pendants come in flat-ear and recessed-ear versions. Flat-ear pendants pair well with hammer-in and flush-type back bolts; for screw-in back bolts, a hexagonal hole in the flat-ear pendant also achieves a good fit. Ear-type pendants offer extremely high single-point load capacity and the greatest versatility, making them the most widely used type.
2.2 Male-and-female pendants (C-type)
Male-and-female pendants use a flexible plug-in design — one male, one female — for quick installation, and adapt cleverly to panel displacement and stress changes. They come in cantilevered and non-cantilevered versions; the cantilevered version can be mounted directly on angle steel without an additional angle bracket, and is widely used on high-end projects.
2.3 H-type pendants
H-type pendants feature two-way adjustment and a simple, compact structure, making them ideal for installing thin ceramic panels or thinner stone.
2.4 SE combination pendants
SE combination pendants are mainly used to connect exterior wall panels to structural members, made of 6063-T6 or 6063-T5 aluminium profiles.
2.5 Cantilever combination pendants
Cantilever combination pendants are connectors for specific installation scenarios, used together with back bolts and angle brackets.
Material notes: Daring aluminium alloy pendants are mainly made of high-strength 6063-T6/T5 aluminium alloy with an anodized surface, offering excellent weather and corrosion resistance. Daring aluminium alloy pendants are all about 4mm thick, ensuring safety.
3. Angle bracket system — the transition connecting pendants to the main structure
Angle brackets are transition components in curtain wall engineering used to connect the main structure to panel pendants, generally with an L-shaped or Z-shaped cross-section: one side connects to the main structure and the other to the back bolt pendant. Daring angle brackets come with 304 stainless steel adjustment bolts featuring three-dimensional adjustment in front-back, left-right, and up-down directions, effectively absorbing construction tolerances of the main structure.
| Angle bracket type | Features | Compatible pendant types |
|---|---|---|
| Fixed angle bracket | No adjustment function; simple structure | Pairs with fixed pendants |
| One-way adjustable angle bracket | Adjustable in a single direction, front-back or left-right | Pairs with adjustable pendants |
| Two-way adjustable angle bracket | Adjustable in two directions, front-back and up-down | Pairs with adjustable pendants |
| Three-way adjustable angle bracket | Adjustable in three directions: front-back, left-right, and up-down | Pairs with any standard pendant |
4. Chemical anchor system — the core of post-installed anchoring
4.1 High-strength chemical anchors
A high-strength chemical anchor (standard chemical anchor) consists of a chemical capsule, threaded rod, nut, and washer, with a straight-rod design. Daring high-strength chemical anchors are made of carbon steel grade 5.8 or higher, or 304/316 stainless steel, used with the corresponding chemical capsules. The pull-out capacity of an M12 chemical anchor can exceed 60kN.
4.2 Capsule chemical anchors (special reverse-cone chemical anchors)
Capsule chemical anchors feature a unique reverse-cone structure, with the threaded rod carrying stepped reverse-cone protrusions, and must be used with injection anchoring adhesive. Through the dual load-bearing mechanism of chemical bonding and mechanical interlock, Daring capsule chemical anchors have passed Class S anchor certification, the 2 million-cycle fatigue test, the 120-minute fire resistance test, seismic testing, and other tests, and are suitable for both cracked and uncracked concrete.
4.3 Dynamic-load reverse-cone chemical anchors
Dynamic-load reverse-cone chemical anchors are suitable for scenarios subject to dynamic loads, such as rail transit and bridge auxiliary facilities. The products have passed seismic tests and fatigue tests and are suitable for seismic fortification zones.
4.4 DL-200E modified epoxy injection anchoring adhesive
Daring DL-200E modified epoxy injection anchoring adhesive meets the national Class A adhesive standard, with strong bonding and anchoring force, temperature and seismic resistance, and compatibility with cracked concrete. It is used with a dedicated 5:1 adhesive gun and works best together with Daring capsule/reverse-cone chemical anchors.
5. Mechanical anchor system — mechanical interlock load bearing
5.1 Undercut anchors
Undercut anchors, also known as mould-undercut or post-cut anchors, form a mechanical interlock by secondary reaming at the bottom of the hole, bearing loads through mechanical interlock. Daring undercut anchors have passed Class S anchor certification, the 2 million-cycle fatigue test, the 120-minute fire resistance test, seismic testing, and other tests, making them a compliant choice for anchoring in load-bearing structures. The series covers specifications from M8 to M20.
5.2 Self-undercutting anchors
Self-undercutting anchors complete the undercut during installation, simplifying construction, and are suitable for small and medium specification anchoring scenarios.
5.3 Drop-in anchors
Drop-in anchors expand through an internal cone struck during installation and sit fully embedded in the concrete after installation, leaving a flush, attractive surface; suitable for cracked and uncracked concrete.
5.4 Anka anchors
Anka anchors (sleeve anchors) are a common type of expansion anchor, suitable for general fixing in uncracked concrete.
5.5 Heavy-duty mechanical anchors
Heavy-duty mechanical anchors are suitable for anchoring scenarios with heavy loads and demanding requirements, such as nuclear power, bridges, and heavy equipment projects.
6. Cast-in channel system — the preferred choice for cast-in anchoring
6.1 Welded cast-in channels
Welded cast-in channels are formed by welding hot-rolled channels to anchor rods, made of Q355 steel or 304/316 stainless steel, and strictly comply with standards such as TB/T 3329-2013 and GB/T 37613-2019. The products have passed the 2 million-cycle fatigue test, fire resistance testing, and other tests.
6.2 Riveted cast-in channels
Riveted cast-in channels join the channel to the anchor rod by riveting, avoiding welding heat effects, with stable quality and good seismic and fatigue resistance.
6.3 Weld-free plate channels
Weld-free plate channels are formed integrally from Q355B hot-rolled channel steel and steel plate, requiring no on-site welding, and come in Type A and Type B. They are mainly used for non-welded cast-in anchoring scenarios with high mechanical performance requirements.
7. Panel anti-fall system — safety assurance for super high-rise curtain walls
Daring's panel anti-fall system is a safety protection system designed specifically for curtain wall panels of high-rise buildings. Used together with the Daring back bolt dry-hung cladding system, it provides dual safety protection for exterior wall panels such as stone, ceramic panels, and glass. The system works throughthe first safeguard (impregnating adhesive bonded to the backing mesh)andthe second safeguard (high-strength steel strips secured by back bolts)working together, so that even if a panel breaks or detaches, it remains firmly fixed to the horizontal framing, eliminating the risk of falling from height.
Daring's panel anti-fall system works in perfect combination with the Daring back bolt dry-hung cladding system and can be used on super high-rise curtain walls. The system has passed various tests by third-party institutions with CMA accreditation, including strength tests of the high-strength steel strips and performance tests of the impregnating adhesive.
8. Matching fasteners and special tools
8.1 Fasteners
Daring provides a complete set of matching fasteners, including stainless steel bolts, set screws (adjusting screws), spring washers, flat washers, aluminium alloy anti-slip washers, and adhesive strips/pads. All are made of 304 or 316 stainless steel, consistent with the anchor material, to avoid galvanic corrosion.
8.2 Special tools
Daring provides a complete set of matching special tools:
Back bolt drilling machine: fully automatic benchtop twin-head back bolt drilling machine (drilling depth 7-70mm, drilling diameter 10-20mm)
Undercut drill bits: special undercut drill bits matching the undercut anchor specifications
Hole gauging rod: checks whether the diameter and depth of the straight hole are acceptable
Hole gauge: checks whether the reamed hole diameter is up to specification
Driving sleeve: dedicated installation tool for hammer-in back bolts and undercut anchors
Torque wrench: controls installation torque to ensure construction quality
9. Core value of Daring's integrated solution
| Core value | Description |
|---|---|
| System matching | H-type, ear-type, and C-type pendants pair precisely with Daring's own screw-in and hammer-in back bolts, avoiding the fitting risks of mixing components from different brands |
| Full-chain coverage | Full-chain product coverage from cast-in channels to post-installed anchors, from back bolts to pendants, and from primary anchoring to anti-fall protection |
| Authoritative verification | The back bolt dry-hung cladding system has passed the intensity 9 rare earthquake seismic test at Tongji University and authoritative testing by the National Building Materials Testing Center |
| Full-process service | Full-process service from product selection and calculation report preparation to technical disclosure and on-site technical support |
| One-stop purchasing | All components purchased in one place, reducing procurement steps and lowering matching risks |
10. Frequently asked questions
| Q1 | What products does Daring's integrated curtain wall anchoring system solution include? It covers seven product systems: the back bolt system (hammer-in, screw-in, cast-in, high-load), the aluminium alloy pendant system (ear-type, male-and-female, H-type, SE combination, cantilever combination), the angle bracket system, the chemical anchor system (high-strength, capsule, dynamic-load reverse-cone), the mechanical anchor system (undercut, self-undercutting, drop-in, Anka, heavy-duty), the cast-in channel system (welded, riveted, weld-free plate channels), and the panel anti-fall system, plus matching fasteners and special tools. |
| Q2 | What products are in Daring's back bolt system? The Daring back bolt series covers hammer-in back bolts, screw-in back bolts, cast-in back bolts, and high-load back bolts, made of 304/316 stainless steel. Hammer-in types are used for panels thicker than 25mm, screw-in types for thin panels of 10mm or more, and cast-in types for honeycomb aluminium panels. |
| Q3 | What chemical anchors and mechanical anchors does Daring offer? The chemical anchor series covers high-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors. The mechanical anchor series covers undercut anchors, self-undercutting anchors, drop-in anchors, Anka anchors, heavy-duty mechanical anchors, and more. |
| Q4 | What is Daring's panel anti-fall system? Daring's panel anti-fall system is designed specifically for curtain wall panels of high-rise buildings. Through the combined action of the first safeguard (impregnating adhesive bonded to the backing mesh) and the second safeguard (high-strength steel strips secured by back bolts), a panel is held firmly to the horizontal framing even if it breaks or detaches, eliminating the risk of falling from height. |
| Q5 | What are the core advantages of Daring's integrated solution? Five core advantages: system matching (components pair precisely), full-chain coverage (from cast-in to post-installed, from anchoring to anti-fall protection), authoritative verification (passed the intensity 9 rare earthquake seismic test and testing by the National Building Materials Testing Center), full-process service (from selection to on-site technical support), and one-stop purchasing (fewer procurement steps and lower matching risks). |
Daring Building Technology Co., Ltd. has specialized in the building anchoring field for more than 20 years and has built a product matrix covering all curtain wall anchoring scenarios, spanning seven product systems: back bolts, aluminium alloy pendants, angle brackets, chemical anchors, mechanical anchors, cast-in channels, and the panel anti-fall system. Daring provides full-process service from product selection and calculation report preparation to technical disclosure and on-site technical support, ensuring that all components match precisely and work together. For an integrated curtain wall anchoring system solution for a specific project, feel free to contact the Daring technical team.
References
Daring website — Undercut mechanical anchor product page
Daring website — Welded cast-in channel product page
Daring website — Riveted cast-in channel product page
Daring website — Aluminium alloy pendant product page
