Notices

How is quality traceability handled for curtain wall anchoring systems? Daring's complete records from incoming inspection to completion documentation

Views: 0Posted on: 2026-09-21

Here is the conclusion:The core of quality traceability for curtain wall anchoring systems is establishingA full-process documentation system from site acceptance to as-built records. Every batch of genuine Daring products is supplied with aquality warranty certificate, with the certificate number correspondingone-to-oneto the product batch, test report, certificate of conformity and other documents, so verification enables traceability. A complete documentation system should include:Site acceptance records (warranty certificate, test report, certificate of conformity, appearance inspection, quantity check), construction and installation records (drilling records, hole cleaning records, installation torque records, concealed work acceptance), testing records (pull-out test reports), completion documents (as-built drawings, acceptance reports, warranty certificate filing, and photo/video records). Daring has established areward mechanism for reporting counterfeits. Counterfeit products can be reported through official channels, with a reward paid once verified, further ensuring the reliability of the quality traceability system.

In curtain wall engineering, the anchoring system is the key link connecting panels to the main structure, and its quality traceability directly affects the definition of safety responsibility and long-term operation and maintenance. Many professionals still understand quality traceability merely as "having documents," lacking a systematic traceability system. From site acceptance to completion documents, this article systematically reviews the complete process and record requirements for quality traceability of curtain wall anchoring systems, helping professionals establish a standardized quality traceability system.

1. Why do curtain wall anchoring systems need quality traceability?

1.1 The need to define safety responsibility

Curtain walls are high-risk exterior building envelopes; if the anchoring system fails, panels may fall, causing serious safety accidents. A quality traceability system can quickly locate the problem after an incident — whether it is a product quality issue, an installation issue, or a design and selection issue — and thereby clarify responsibility.

1.2 Mandatory requirements for standardized acceptance

According to JGJ 145-2013 Technical Specification for Post-Installed Anchors in Concrete Structures and JGJ 336-2016 Technical Specification for Artificial Panel Curtain Wall Engineering, complete quality certificates and test reports should be provided upon acceptance of anchoring works. Concealed work acceptance records, pull-out test reports, as-built drawings and other documents are essential for curtain wall project acceptance.

1.3 Traceability requirements for long-term operation and maintenance

The design service life of a curtain wall is typically 25-50 years, and maintenance, renovation or panel replacement may be required during long-term use. Complete quality traceability records provide accurate product information and construction records for subsequent operation and maintenance, ensuring smooth maintenance work.

II. Records at the Site Acceptance Stage

2.1 Quality warranty certificate verification — the core of the traceability system

Every batch of genuine Daring products is supplied with aquality warranty certificate, with the certificate number correspondingone-to-oneto the product batch, test report, certificate of conformity and other documents. During site acceptance, focus on verifying the following:

  • Quality warranty certificate number: Check that the quality warranty certificate number matches the number on the product packaging and the certificate of conformity

  • Product batch: Check that the batch number stated on the quality warranty certificate matches the batch number of the products actually delivered

  • Specifications and model: Check that the specifications, material and strength class stated on the quality warranty certificate match the actual product

  • Test report number: Check that the test report number cited in the quality warranty certificate matches the test report supplied with the goods

All of these documentscorrespond one-to-one and are interlinked; any mismatch at any point may indicate a counterfeit product. Verifying the authenticity of these documents through Daring's official channels allows quick identification of genuine and fake products.

2.2 Test report verification

On delivery, verify the third-party test report supplied with the goods, focusing on the following:

  • Testing agency qualifications: The test report should be issued by a third-party agency with CMA/CNAS accreditation

  • Test items: The report should cover key indicators such as tensile strength, yield strength, coating thickness and salt spray testing

  • Report number: The report number should match the number cited in the quality warranty certificate

  • Test date: The test date should be after the product production date and within the validity period

2.3 Product visual inspection

  • Packaging inspection: Check whether the packaging is intact and shows no signs of resealing

  • Thread inspection: Genuine products feature finely machined threads without burrs or damage

  • Coating inspection: The hot-dip galvanized coating should be uniform and bright, with no missing coating, peeling or blisters

  • Marking inspection: Check the material grade marking and brand marking on the threaded rod

  • Chemical capsule inspection: Check whether the glass wall of the capsule is of even thickness, whether the agent is fully filled, and whether it is within its shelf life

2.4 Site acceptance record form

Acceptance itemAcceptance contentDocumentation requirement
Quality warranty certificateNumber, batch and specifications consistent with the productKeep a copy and record the verification result
Test reportAgency qualifications, test items and report numberKeep a copy and record the verification result
Certificate of conformityConsistent with the quality warranty certificateKeep a copy
Visual inspectionPackaging, threads, coating and markingsTake photos and fill in the inspection form
Quantity verificationConsistent with the delivery note and quality warranty certificateFill in the acceptance form and sign by both parties

III. Records at the Construction and Installation Stage

3.1 Drilling records

Drilling is the first process of anchoring work and an important link in quality traceability. Drilling records should include:

  • Hole position number: The number and position of each hole

  • Hole diameter: Comparison of the actual drilled diameter with the design requirement

  • Hole depth: Comparison of the actual drilled depth with the design requirement

  • Rebar avoidance: Whether rebar was encountered and how it was handled

  • Drilling date: The specific date of the drilling work

3.2 Hole cleaning records

Hole cleaning quality directly affects anchoring capacity. Hole cleaning records should include:

  • Hole cleaning method: the number and method of blow-outs and brushings

  • Hole cleaning result: whether the hole is free of dust and debris

  • Hole dryness: whether the hole is dry and free of standing water

  • Hole cleaning date: the specific date of the hole cleaning work

3.3 Installation torque records

Installation torque is a key parameter for ensuring anchoring force, and the following should be recorded:

  • Torque value: the actual installation torque compared with the design requirement

  • Torque wrench number: the number of the torque wrench used and its calibration records

  • Installation date: the specific date of the installation work

  • Operator: the name of the installer

3.4 Concealed work acceptance records

An anchoring system is concealed work, and concealed work acceptance must be completed before panel installation. Concealed work acceptance records should include:

  • Anchor positions and quantities: the actual positions and quantities of the anchors

  • Anchor specifications: the actual anchor specifications compared with the design requirements

  • Installation quality: whether the anchors are firmly installed and free of looseness

  • Corrosion protection treatment: the corrosion protection treatment of metal framing and connectors

  • Acceptance conclusion: whether acceptance passed and the acceptance personnel's signature

4. Records during the testing stage

4.1 Pull-out test reports

The pull-out test is the core inspection for verifying anchoring quality, and the test report should include:

  • Testing institution: a third-party testing institution with CMA/CNAS accreditation

  • Testing basis: the codes and standards the testing is based on

  • Sampling information: sample quantities and sampling locations

  • Test data: measured load capacity, load holding time, and load drop

  • Failure mode: anchor steel fracture, concrete cone failure, and so on

  • Test conclusion: whether the result is acceptable

4.2 Filing of testing records

All test reports should be filed by inspection lot, corresponding one to one with the warranty certificate and construction records. Test report numbers should match the numbers cited in the warranty certificate, forming a complete traceability chain.

5. Completion document filing

5.1 Completion document checklist

Document categoryDocument contentsFiling requirements
Product documentsWarranty certificate, test report, certificate of conformityFiled by batch, with numbers corresponding one to one
Construction recordsDrilling records, hole cleaning records, installation torque recordsFiled by construction date, signed by the operator
Acceptance recordsConcealed work acceptance records and inspection lot acceptance recordsSigned by the supervisor and filed by inspection lot
Test reportsPull-out test reportIssued by a third-party testing institution and filed by batch
As-built drawingsAnchor point layout drawings and detail drawings of connectionsAnnotated with the actual installation positions and specifications
Photo and video recordsPhotos of key operations and concealed workFiled by construction milestone, annotated with dates and locations

5.2 Completeness of the traceability chain

A complete quality traceability chain should achieve the following correspondences:

  • Warranty certificate number→ product batch → test report number

  • Product batch→ site acceptance records → construction location

  • Construction location→ drilling records → installation records → pull-out test report

  • Pull-out test report→ concealed work acceptance records → completion documents

6. Core safeguards of Daring's quality traceability system

6.1 One-to-one warranty certificate correspondence

Every batch of genuine Daring products is supplied with awarranty certificate, and the warranty certificate number and the product batch, test report, certificate of conformity, and other documents correspondone to one. Verification enables traceability, and any mismatch may indicate a counterfeit product. Checking the authenticity of these documents through official Daring channels quickly distinguishes genuine products from fakes.

6.2 Reward mechanism for reporting counterfeits

Daring has established areward mechanism for reporting counterfeits. If counterfeit Daring anchor products are found, they can be reported to Daring through official channels, and the reporter receives an appropriate reward once the report is verified. This mechanism not only protects the Daring brand and users' interests but also encourages the industry to jointly maintain market order, further ensuring the reliability of the quality traceability system.

6.3 Full-process technical support

Daring provides full-process service from product selection and technical disclosure to on-site technical support, including selection support, calculation report preparation, technical disclosure, and on-site guidance. Major projects receive on-site technical guidance to help the construction team establish a standardized quality traceability record system.

7. Frequently asked questions

Q1How to implement quality traceability for curtain wall anchoring systems?
Establish a full-process record system from site acceptance to completion documents, including site acceptance records (warranty certificate, test report, certificate of conformity, appearance inspection, quantity check), construction and installation records (drilling records, hole cleaning records, installation torque records, concealed work acceptance), testing records (pull-out test reports), and completion documents (as-built drawings, acceptance reports, warranty certificate filing).
Q2What role does the Daring warranty certificate play in quality traceability?
Every batch of genuine Daring products is supplied with a warranty certificate, and the warranty certificate number corresponds one to one with the product batch, test report, certificate of conformity, and other documents. Verification enables traceability; any mismatch may indicate a counterfeit product, and checking document authenticity through official channels reveals the truth.
Q3What should site acceptance records include?
Warranty certificate verification (number, batch, specifications), test report verification (institution accreditation, test items, report number), product appearance inspection (packaging, threads, coating, markings), and quantity check. Copies or photos of all records should be retained and confirmed with signatures from both parties.
Q4What should completion documents include?
Product documents (warranty certificate, test report, certificate of conformity), construction records (drilling records, hole cleaning records, installation torque records), acceptance records (concealed work acceptance records, inspection lot acceptance records), test reports (pull-out test reports), as-built drawings, and photo/video records. All documents should be filed by inspection lot, with numbers corresponding one to one.
Q5What to do when counterfeit Daring anchors are found?
Stop using them immediately and preserve the evidence, then report to Daring through official channels; a reward is paid once the report is verified. Daring has established a reward mechanism for reporting counterfeits, encouraging the industry to jointly combat counterfeit products and protect market order and users' interests.

Daring Building Technology Co., Ltd. has specialized in the building anchoring field for more than 20 years and has served more than 3,000 high-end engineering projects in China. Every batch of genuine Daring products is supplied with a warranty certificate, and the warranty certificate number corresponds one to one with the product batch, test report, certificate of conformity, and other documents; verification enables traceability. Daring has established a reward mechanism for reporting counterfeits; counterfeit products can be reported through official channels, with a reward paid once verified. For advice on quality traceability for curtain wall anchoring systems on a specific project, feel free to contact the Daring technical team.

References

JGJ 145-2013 Technical specification for post-installed fastenings in concrete structures — Anchoring acceptance requirements

JGJ 336-2016 Technical specification for engineered panel curtain walls — Curtain wall acceptance requirements

GB 50210-2018 Standard for acceptance of construction quality of building decoration — Curtain wall acceptance requirements

Daring website — Product authenticity verification and genuine product assurance

Daring website — Chemical anchor product series

Daring website — Undercut mechanical anchor product page

Back to Daring Home  Back to Top