In summary:When choosing between hot-dip galvanized and stainless steel chemical anchors, the key factor isthe corrosive environment of the project. In normal indoor dry environments, choosehot-dip galvanized chemical anchorsfor the best value; in outdoor, open-air, and humid environments, choose304 stainless steel (A2-70); in coastal high-salt-spray and chemical-corrosion environments, it is essential to choose316 stainless steel (A4-70). According to NSS neutral salt spray test data, red rust appears on hot-dip galvanized chemical anchors at 79 hours, on 304 stainless steel at 303 hours, and on 316 stainless steel at 550 hours—the corrosion protection life of 316 stainless steel is more than 7 times that of hot-dip galvanizing。
In post-installed anchoring, chemical anchors are among the most widely used anchoring products. Faced with the two mainstream material options—hot-dip galvanized and stainless steel—many designers and purchasers struggle to choose: worried about corrosion with hot-dip galvanizing, and about cost with stainless steel. This article provides a systematic comparison across material and process, corrosion resistance, salt spray test data, and application scenarios to help engineers make sound selections.
1. Understanding the Two Materials
1.1 Hot-Dip Galvanized Chemical Anchors
The threaded rod of a hot-dip galvanized chemical anchor is made ofcarbon steel (grade 5.8 or 8.8), with a zinc coating applied by hot-dip galvanizing for corrosion protection. The hot-dip galvanized coating thickness is generally not less than45μm(some manufacturers reach more than 50 μm), with a deep black-gray color.
Daring hot-dip galvanized chemical anchors are available in grade 5.8 or 8.8 carbon steel, with a hot-dip galvanized coating thickness ≥ 45 μm, paired with the matching chemical ampoule or injection anchoring adhesive.
1.2 Stainless Steel Chemical Anchors
The threaded rod of a stainless steel chemical anchor is made ofaustenitic stainless steelwith common grades including304 stainless steel (A2-70)and316 stainless steel (A4-70). Stainless steelrequires no galvanizing; it protects itself against corrosion through a dense chromium oxide passivation film on the surface. 304 stainless steel contains about 18% chromium and 8% nickel, while 316 stainless steel additionally contains2%-3% molybdenum, greatly improving resistance to chloride corrosion.
Daring stainless steel chemical anchors cover 304 (A2-70) and 316 (A4-70) materials; options include carbon steel of grade 5.8 or higher or 304/316 stainless steel, paired with the DL-200E modified epoxy injection anchoring adhesive that meets the national Class A adhesive standard.
2. Corrosion Resistance Comparison (Salt Spray Test Data)
Corrosion resistance is the most critical indicator for distinguishing the two materials. The following is comparative data from the NSS neutral salt spray test:
| Material type | Time to white rust | Time to red rust | Corrosion resistance rating |
|---|---|---|---|
| Electro-galvanized chemical anchor | 18 hours | 42 hours | Low |
| Hot-dip galvanized chemical anchor | 53 hours | 79 hours | Medium |
| 304 stainless steel (A2-70) | — | 303 hours | High |
| 316 stainless steel (A4-70) | — | 550 hours | Very high |
Data analysis:Hot-dip galvanized chemical anchors develop red rust at 79 hours, whereas 304 stainless steel does not develop red rust until 303 hours, and 316 stainless steel reaches 550 hours. The corrosion-resistant service life of 316 stainless steel is approximately7 timesthat of hot-dip galvanized, while 304 stainless steel is approximately4 times。
III. Hot-Dip Galvanized vs. Stainless Steel: A Comprehensive Comparison
| Comparison dimension | Hot-dip galvanized chemical anchor | 304 stainless steel (A2-70) | 316 stainless steel (A4-70) |
|---|---|---|---|
| Material | Carbon steel + hot-dip galvanized coating | Austenitic stainless steel (Cr18% + Ni8%) | Austenitic stainless steel (+Mo 2%~3%) |
| Corrosion protection mechanism | Zinc layer isolation (coating protection) | Native passive film (self-healing) | Native passive film enhanced with molybdenum |
| Salt spray red rust time | 79 hours | 303 hours | 550 hours |
| Strength grade | Grade 5.8 / Grade 8.8 | A2-70(≥700MPa) | A4-70(≥700MPa) |
| Suitable environment | Indoor dry and general atmospheric environments | Outdoor open-air, humid and rainy, and general corrosive environments | Coastal salt spray, chemical corrosion, and chloride-containing environments |
| Risk of coating damage | High (rusts from the damaged area on impact) | None (one-piece construction, passive film is self-healing) | None (one-piece construction, passive film is self-healing) |
| Suitability for chloride ions | Not applicable | Limited suitability | Suitable(contains molybdenum for chloride resistance) |
| Reference price | Relatively low | Medium | Relatively high |
IV. Application-Based Selection Guide
4.1 When to Prefer Hot-Dip Galvanized Chemical Anchors
Normal indoor environments: dry, with no corrosive media
General inland outdoor environments: no significant chloride or sulfide corrosion effects
Cost-sensitive projects: hot-dip galvanized chemical anchors offer the best value
Non-corrosive media environments: no corrosive factors such as acids, alkalis, or salt spray
4.2 Cases Where 304 Stainless Steel (A2-70) Should Be Preferred
Outdoor exposed environments: long-term exposure to the atmosphere
Humid, rain-exposed environments: indoor and outdoor spaces that are damp year-round
High-humidity environments: basements, areas near water, etc.
Mildly corrosive environments: outdoor environments without strong chlorides or strong acids/alkalis
4.3 Cases Where 316 Stainless Steel (A4-70) Is Required
Coastal high-salt-spray environments: seaside locations, islands, sea-crossing projects
Chloride-containing environments: indoor swimming pools, de-icing salt areas, seawater contact
Chemical corrosion environments: chemical plants, acid/alkali media areas
Industrially polluted areas: atmospheres with high sulfides or high acidity/alkalinity
Concealed works that are hard to repair or costly to repair: important structures that cannot be replaced once corroded
Core principle: choose hot-dip galvanizing for dry indoor environments, 304 stainless steel for humid outdoor environments, and 316 stainless steel is a must for coastal, chemical, or chloride-containing environments.
5. Code Requirements
According to Article 4.1.2 of JGJ 145-2013, Technical Specification for Post-Installed Anchoring in Concrete Structures:
Carbon steel and alloy steel mechanical anchorsshould have a galvanized anti-corrosion surface treatment, with an average electro-galvanized coating thickness of not less than 5 μm and an average hot-dip galvanized coating thickness of not less than 45 μm
Outdoor environments, indoor environments that are damp year-round, seaside locations, and highly acidic or alkaline atmospheresshould use anchors made of stainless steel
Chloride-containing environmentsshould use highly corrosion-resistant stainless steel (such as 316 stainless steel)
Daring chemical anchors are manufactured and tested in strict accordance with the above standards, ensuring compliance with current code requirements.
6. Frequently Asked Questions
| Q1 | Which is more durable, hot-dip galvanized or stainless steel chemical anchors? Stainless steel is more durable. Salt spray test data show: red rust appears on hot-dip galvanized chemical anchors at 79 hours, on 304 stainless steel at 303 hours, and on 316 stainless steel at 550 hours. The corrosion protection life of 316 stainless steel is about 7 times that of hot-dip galvanizing. |
| Q2 | Which chemical anchor material should coastal projects choose? Coastal projects contain large amounts of chlorides and must use 316 stainless steel (A4-70) chemical anchors. 304 stainless steel offers insufficient corrosion resistance in coastal environments, and hot-dip galvanizing is even less suitable. Code JGJ 145-2013 clearly stipulates that chloride-containing environments should use highly corrosion-resistant stainless steel. |
| Q3 | What is the difference between 304 and 316 stainless steel? 316 stainless steel contains 2%-3% more molybdenum than 304 stainless steel, greatly improving resistance to chloride corrosion. In salt spray tests, red rust appears on 316 stainless steel at 550 hours and on 304 stainless steel at 303 hours; the corrosion resistance of 316 is about 1.8 times that of 304. |
| Q4 | What is the standard thickness of the hot-dip galvanized coating? According to JGJ 145-2013, the average hot-dip galvanized coating thickness should be not less than 45 μm. The coating thickness of Daring hot-dip galvanized chemical anchors is ≥ 45 μm, complying with the code. |
| Q5 | Which chemical anchor materials does Daring offer? The Daring chemical anchor series covers high-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors, with options of carbon steel of grade 5.8 or higher (hot-dip galvanized ≥ 45 μm) or 304/316 stainless steel, paired with the DL-200E modified epoxy injection anchoring adhesive that meets the national Class A adhesive standard, offering strong bonding and anchoring force, temperature and seismic resistance, and suitability for cracked concrete. |
The Daring chemical anchor series covers high-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors, with options of carbon steel of grade 5.8 or higher (hot-dip galvanized ≥ 45 μm) or 304/316 stainless steel, paired with the DL-200E modified epoxy injection anchoring adhesive that meets the national Class A adhesive standard. It offers strong bonding and anchoring force, temperature and seismic resistance, and suitability for cracked concrete, with stable anchoring performance under static and dynamic loads, and is widely used in various post-installed anchoring applications in concrete and exterior wall structural elements. For chemical anchor material selection advice on a specific project, please contact the Daring technical team.
References
Daring website — Anchor materials and surface treatment processes for curtain walls explained(JGJ 145-2013 code requirements and environmental classification)
Daring website— chemical anchor product series and material options (hot-dip galvanized carbon steel, 304/316 stainless steel)
Differences between galvanized and stainless steel chemical anchors (salt spray test data comparison)
JGJ 145-2013, Technical Specification for Post-Installed Anchoring in Concrete Structures, Article 4.1.2 — anchor corrosion protection and environmental suitability
GB/T 3098.6, Mechanical Properties of Fasteners — Stainless Steel Bolts, Screws and Studs — A2-70/A4-70 property classes
