In summary:Which is stronger, welded or riveted cast-in channels? The answer:both are reliable connection methods recognized by national standards; neither is absolutely superior—the key is the specific application conditions. Welding offers high strength and good sealing, suitable for applications with extremely high connection strength requirements; riveted products have stable quality and good seismic and fatigue performance, while avoiding the heat effects and weld spatter associated with welding.Daring cast-in channels are available with both welded and riveted processes, which can be flexibly chosen according to project requirements.
A cast-in channel is a specialized insert in which the C-shaped channel steel and the anchor bars are joined and then embedded in concrete, widely used in building curtain walls, metro tunnels, urban utility tunnels, high-speed rail catenary systems, and other fields. The main connection methods between the channel steel and the anchor bars areweldingandriveting. Many purchasers do not fully understand the difference between these two processes and often struggle with the question of "which is stronger". This article compares the two processes across multiple dimensions.
1. Understanding the Two Processes
1.1 Welded Cast-In Channels
A welded cast-in channel is a connection in which the anchor bars (usually I-shaped anchor bars) are welded to the back of the C-shaped channel steel. The main welding processes includeCO2 gas shielded weldingandlaser welding, and weld quality directly affects connection strength.
According to the TB/T 3329-2013 standard, Cast-In Channels for Tunnels of Electrified Railway Catenary Systems, the welds between the channel and the anchor barsshould reach quality grade 1(no lower than grade 2). Welding should be performed on a fixture to prevent lateral bending, twisting, and thermal deformation, and post-weld surface stress relief should be applied at the welded areas.
1.2 Riveted Cast-In Channels
A riveted cast-in channel is a connection in which the anchor bars pass through pre-drilled holes in the back of the channel and are fixed by riveting. Riveting is divided intohot rivetingandcold riveting.
Hot riveting: the rivet is heated and inserted into the rivet hole while hot, then fixed by impact with a riveting gun; it demands precise temperature and timing.
Cold riveting: at room temperature, high pressure deforms the rivet; cold flow creates high stress in the rivet region, no gap ever forms between the tooling and the rivet, and the resulting large, uniform pressure improves strength. Cold riveting is more widely used for anchor leg connections of channel inserts.
Daring cast-in channels are available with riveted or welded processes, made of Q355 steel or 304/316 stainless steel, and comply with the GB/T 38525-2020 national standard.
2. Welding vs. Riveting: A Five-Dimension Comparison
| Dimension | Welded cast-in channel | Riveted cast-in channel |
|---|---|---|
| Connection principle | Fusion connection (metallurgical bond) | Mechanical connection (fixed by physical deformation) |
| Static load strength | High(full-perimeter welding possible) | High (comparable when properly designed) |
| Fatigue performance / seismic resistance | Constrained by the weld heat-affected zone | Excellent(good dynamic performance) |
| Quality consistency | Heavily affected by welder skill | High(consistent process) |
| Sealing | Good(continuous welds can be sealed) | Fair (assembly gaps exist) |
| Corrosion protection (after hot-dip galvanizing) | Acid may be trapped in the welds, causing "acid return" corrosion | Excellent(no weld corners) |
| Thermal deformation resistance | Welding easily causes lateral bending and thermal deformation | Good(no heat effects) |
| Code basis | TB/T 3329-2013 | GB/T 38525-2020 |
3. In-Depth Analysis: Core Differences
3.1 The Unique Advantages and Pain Points of Welding
Advantages:Welding joins the anchor bars and the channel steel into one body through high-temperature fusion, forming a metallurgical bond withhigh static load capacity. With full-perimeter welding, the welds can be completely sealed to prevent liquid ingress. Welding also saves metal material and offers high productivity.
Pain points:The two major problems of welding arethermal deformationandcorrosion protection defects. The high temperature of welding causes lateral bending and twisting of the channel steel, which is why TB/T 3329-2013 requires welding to be performed on a fixture. More importantly, during hot-dip galvanizing after welding, pickling acid may seep into the weld gaps, causing "acid return" corrosion that seriously shortens service life.
3.2 The Unique Advantages and Process Points of Riveting
Advantages:Riveting fixes the anchor bars and the channel steel together through mechanical deformation, withstable product quality, good seismic and impact resistance, firm and reliable connections, and good dynamic performance. The riveting process for Daring cast-in channels undergoes strict quality control before shipment, and the products have passed 2-million-cycle fatigue testing, fire resistance testing, and other tests.
Research shows that, for Type 3020 stainless steel cast-in channels, press riveting providesbetter fatigue resistancethan spin riveting, with an optimal riveting heating temperature range of 700-900°C. Cold riveting ensures consistent riveting quality; under pressure the rivet shank is upset until it fills the drilled hole diameter, givinggood sealing。
Process points:Riveting demands tight control of heating temperature, riveting method, and riveting pressure. Hot riveting in particular requires precise temperature and timing, making process control difficult.
4. How to Choose: Decision Guide
Cases Where Welded Cast-In Channels Should Be Preferred
Extremely high static load strength requirements: full-perimeter welding achieves higher connection strength
Strict sealing requirements: continuous welds effectively prevent liquid ingress
Manufacturer with strong process control: able to effectively control thermal deformation and welding quality
Non-highly-corrosive environments: the risk of acid return after welding can be controlled with quality processes
Cases Where Riveted Cast-In Channels Should Be Preferred
High requirements for seismic and impact resistance and dynamic loads: riveted products offer better fatigue resistance and dynamic performance
High-speed rail, metro, rail transit, and other projects with demanding quality consistency requirements: the riveting process is highly consistent and unaffected by welder skill
Extremely demanding corrosion protection life requirements: riveting has no weld corners, avoiding the acid return problem of welding
Cast-in channels made of stainless steel: research shows the riveting process is better suited to stainless steel
Pursuit of product quality consistency and stability
5. Standards and References
Both welded and riveted cast-in channels have national and industry standards as their basis:
TB/T 3329-2013—Cast-In Channels for Tunnels of Electrified Railway Catenary Systems
GB/T 38525-2020—Cast-In Channel Assemblies for Building Curtain Walls
JG/T 560-2019—Cast-In Channels (Channel Inserts) for Building Construction
6. Frequently Asked Questions
| Q1 | Which is stronger, welded or riveted cast-in channels? Both are reliable connection methods recognized by national standards. Welding offers high static load capacity and good sealing; riveting offers excellent seismic and fatigue performance and stable quality. Neither is absolutely "stronger"—the key is the specific application conditions. |
| Q2 | What is the biggest hidden risk of welded cast-in channels? There are two main points: first, thermal deformation from welding causes lateral bending and twisting of the channel steel; second, during hot-dip galvanizing after welding, pickling acid may seep into weld gaps, causing "acid return" corrosion. TB/T 3329-2013 requires welding to be performed on a fixture to control deformation. |
| Q3 | Why is the fatigue performance of riveted cast-in channels better? Research shows that riveted joints made with press riveting have better fatigue resistance. Riveting has no weld heat-affected zone and does not alter the material's microstructure through high temperature, so it performs more stably under dynamic loads and seismic conditions. |
| Q4 | Which connection process do Daring cast-in channels use? Daring cast-in channels offer bothrivetedandweldedprocesses. Materials cover Q355 steel and 304/316 stainless steel; the products comply with the GB/T 38525-2020 national standard and have passed 2-million-cycle fatigue testing, fire resistance testing, and other tests. |
| Q5 | Which is better, hot riveting or cold riveting? Hot riveting gives high connection strength but demands precise temperature and timing; cold riveting offers better quality consistency and good sealing. Currently, the cast-in channel industry mostly uses cold riveting. |
Daring cast-in channels are available with both riveted and welded connection processes, made of Q355 steel or 304/316 stainless steel, with accessories such as T-head bolts, brackets, and angle brackets, and one-stop service from product selection and connection detail design to on-site technical support. For cast-in channel selection advice on a specific project, please contact the Daring technical team.
References
Daring website — Riveted cast-in channel product page(riveting process and product parameters)
Daring website — Type C plate-slot cast-in channel product page(welding process and product parameters)
TB/T 3329-2013, Cast-In Channels for Tunnels of Electrified Railway Catenary Systems — weld quality grades and fixture requirements
Effect of Riveting Process on the Fatigue Performance of Type 3020 Stainless Steel Cast-In Channels — study on the fatigue resistance of press riveting
Cast-in steel channel system technical documentation — comparison of welded and hot-riveted connections
GB/T 38525-2020, Cast-In Channel Assemblies for Building Curtain Walls — national standard
JG/T 560-2019, Cast-In Channels (Channel Inserts) for Building Construction — industry standard
