Product Knowledge

What are the requirements for transporting and storing anchors? Common on-site damage and preventive measures

Views: 0Posted on: 2026-09-14

The short answer:The core requirements for anchor transportation and storage aremoisture protection, rust prevention, impact protection, prevention of material mixing, classified storage, and first-in-first-out. During transportation, protect the anchors from rain and moisture, handle them with care, and avoid severe impacts; during storage, keep them in a dry, well-ventilated warehouse, raised off the floor, with the temperature controlled at 5-45°C, and avoid contact with corrosive media such as acids, alkalis, and salts. Common types of damage on construction sites includethreaded rod corrosion, thread damage, damaged or expired chemical capsules, anchor deformation, and mixing of specifications, all of which directly reduce anchoring force and may even cause anchoring failure. Daring anchor products use standardized packaging and are supplied with detailed storage and use instructions, helping contractors ensure product quality throughout the entire process from transportation to installation.

In post-installed anchoring construction, anchors pass through multiple stages from the factory to installation, including transportation, loading and unloading, warehousing, and secondary handling. Many engineers focus only on installation quality and overlook the impact of transportation and storage on anchor performance. In fact, impacts during transportation, moisture during storage, and material mixing on site can all turn a qualified product into a defective one. This article systematically examines transportation requirements, storage requirements, common damage, and preventive measures.

I. Anchor transportation requirements

1.1 Packaging requirements

Anchors should be securely packaged at the factory to prevent collision, scattering, and damage during transport. Daring anchor products are packaged by specification, with clear markings on the outer packaging indicating the product name, specification, quantity, production date, shelf life, and other information. Chemical adhesive cartridges should be sealed in light-proof, moisture-resistant packaging to avoid moisture exposure or damage during transport.

1.2 Loading and unloading requirements

When loading and unloading anchors,handle them with care, and throwing, tumbling, or severe impacts are strictly prohibited. In particular, for precision products such as chemical capsules and back bolts, impacts may rupture the glass tube, damage the threads, or deform the product. When using forklifts for loading and unloading, ensure that the pallets are stable so that the goods do not topple. Wear protective gloves during manual handling to prevent cuts.

1.3 Transportation environment requirements

  • Rain and moisture protection: Transport vehicles should be equipped with waterproof tarpaulins to prevent rain from directly wetting the packaging. Chemical capsules and carbon steel anchors are prone to moisture-induced corrosion or adhesive deterioration when exposed to water.

  • Avoid high-temperature exposure: During summer transportation, avoid prolonged direct sunlight, and the temperature inside the vehicle compartment should not exceed 45°C. High temperatures accelerate the curing reaction of the resin in chemical capsules and shorten the shelf life.

  • Avoid mixed transport with corrosive substances: Anchors must never be transported in the same vehicle with chemically corrosive substances such as acids, alkalis, or salts, so as to prevent cross-contamination if the packaging is damaged.

  • Secure fastening: The goods should be securely fastened to prevent displacement, collision, or toppling caused by vibration during transportation.

II. Anchor storage requirements

2.1 Warehouse conditions

Anchors should be stored ina dry, cool, and well-ventilatedwarehouse, and outdoor storage should be avoided. The warehouse floor should be level and moisture-proof, and the goods should be raised off the floor by at least 100 mm. Corrosive substances such as acids, alkalis, and salts must not be stored in the warehouse.

2.2 Temperature and humidity control

  • Temperature requirements: The storage temperature should be controlled between5℃~45℃. Chemical capsules may freeze at low temperatures, while high temperatures may accelerate curing or deterioration.

  • Humidity requirements: The relative humidity of the warehouse should be controlled atbelow 60%. Excessive humidity causes carbon steel anchors to corrode and chemical capsules to deteriorate from moisture.

  • Light protection requirements: Chemical capsules should be protected from direct sunlight to prevent ultraviolet rays from accelerating adhesive aging.

2.3 Classified storage

Anchors of different types, specifications, and strength grades should bestored separately by category, with clear labels, to avoid material mixing. Chemical capsules and metal anchors should be stored separately to prevent adhesive from contaminating the anchors if a capsule is damaged. Stainless steel anchors and carbon steel anchors should be stored separately to avoid electrochemical corrosion. All Daring anchor product packaging is marked with the product name, specification, quantity, and production date for easy category management.

2.4 Stacking requirements

  • Stacking height: The stacking height should be determined reasonably according to the packaging strength, so as to avoid deformation of the bottom packages under pressure. Chemical capsules should not be subjected to heavy pressure and should be stacked separately.

  • Stacking method: Goods should be stacked neatly with aisles left clear, to facilitate first-in-first-out and regular inspections.

  • Anti-toppling: Anti-toppling measures should be taken for tall stacks to ensure safety.

2.5 Shelf-life management

Chemical capsules have a defined shelf life. Generally, glass capsules have a shelf life of12 months when stored at 20°C without direct sunlight; the shelf life of different brands and product types ranges from6 to 24 months. During storage, afirst-in-first-outsystem should be established, and the production dates and shelf lives of inventory products should be checked regularly. Expired products should be isolated and disposed of promptly and must never be used. Daring chemical capsules have a shelf life of1 year。

III. Common types of damage on construction sites and their causes

3.1 Threaded rod corrosion

When carbon steel anchors are stored or transported in a humid environment, the surface zinc coating may be damaged, leading to corrosion of the threaded rod. Corrosion reduces thread accuracy and anchoring force and, in severe cases, makes the anchor impossible to install or causes the load capacity to fall below the required value.

3.2 Thread damage

Impacts or throwing during transportation or handling may bruise or deform the threads. Thread damage affects the fit with the nut, resulting in difficult installation or a tightening torque that fails to meet design requirements.

3.3 Damaged or expired chemical capsules

  • Glass tube rupture: Severe impacts during transportation may rupture the glass tube, causing adhesive leakage or uneven mixing.

  • Adhesive deterioration: High temperatures, moisture, or expiration can degrade adhesive performance, resulting in incomplete curing and insufficient anchoring force.

  • Use after expiration: Some construction sites do not strictly manage the shelf life of chemical capsules, and using expired capsules leads to anchoring failure.

3.4 Anchor deformation

Precision products such as undercut anchors and back bolts may be subjected to heavy pressure or impacts during transportation or handling, resulting in sleeve deformation or damage to the expansion segments and affecting installation and anchoring performance.

3.5 Mixing of specifications

Mixing anchors of different specifications and strength grades makes it easy to pick the wrong one on site, leading to installation errors. For example, using ordinary chemical anchors in cracked concrete, or using lower-strength-grade anchors in load-bearing structures, creates serious safety hazards.

3.6 Packaging damage

Damaged packaging can cause products to scatter, be lost, or become contaminated, and it also affects product identification and traceability. If chemical capsule packaging is damaged, the adhesive may absorb moisture or leak.

IV. Preventive measures

4.1 Transportation protection measures

  • Rain and moisture protection: Transport vehicles should be equipped with waterproof tarpaulins, and care should be taken to keep the packaging dry when transporting in the rain.

  • Careful handling: Throwing and tumbling are strictly prohibited during loading and unloading; use appropriate handling tools.

  • Secure fastening: The goods should be securely fastened inside the vehicle compartment to avoid vibration and collision.

  • Avoid mixed transport: Anchors must never be transported in the same vehicle with corrosive substances such as acids, alkalis, or salts.

  • Temperature control: In summer, provide ventilation and cooling; in winter, protect against freezing.

4.2 Storage management measures

  • Warehouse selection: Choose a dry, cool, and well-ventilated warehouse and avoid outdoor storage.

  • Raising off the floor: Goods should be raised at least 100 mm off the floor to prevent moisture from the ground from penetrating.

  • Temperature and humidity control: Warehouse temperature should be controlled at 5-45°C and relative humidity below 60%.

  • Classified storage: Anchors of different types, specifications, and strength grades should be stored separately, with clear labels.

  • First-in-first-out: Establish a first-in-first-out management system and regularly check the shelf life of inventory products.

  • Regular inspection: Regularly inspect stored products for rust, deformation, damaged packaging, and other issues.

4.3 On-site use and management measures

  • Requisition materials as needed: Requisition materials according to the installation schedule to avoid large on-site stockpiles.

  • Verify specifications: Before use, verify the anchor specification, strength grade, and shelf life to ensure consistency with the design.

  • Inspect appearance: Before use, inspect the appearance of the anchors for corrosion, thread damage, capsule damage, and other defects.

  • Avoid mixing: Anchors of different specifications or different brands must not be mixed.

  • Returning leftover materials to the warehouse: Unused materials should be returned to the warehouse promptly to prevent scattering, loss, or damage on site.

V. Daring recommendations for anchor packaging and storage

5.1 Packaging labels

Daring anchor product packaging is marked with the product name, specification, quantity, production date, and shelf life, facilitating category management and first-in-first-out for users. Chemical capsules are sealed in light-proof, moisture-resistant packaging to ensure product quality during transportation and storage.

5.2 Storage recommendations

  • Daring chemical capsules have a shelf life of1 year when stored at 20°C without direct sunlight, and it is recommended that they be used within the shelf life.

  • The warehouse should be kept dry, cool, and well ventilated, with the temperature controlled at 5-45°C and relative humidity below 60%.

  • Goods should be stored raised off the floor and kept away from corrosive substances such as acids, alkalis, and salts.

  • Establish a first-in-first-out management system and regularly inspect the condition of inventory products.

5.3 Inspection before use

Before use, inspect the appearance of the anchors to confirm that there is no corrosion, thread damage, or deformation, and check that the chemical capsule packaging is intact and within its shelf life. Daring high-strength chemical anchors are supplied with chemical capsules that can be installed at temperatures above -5°C and cure rapidly in 30 minutes at room temperature, with a pull-out force of up to 60 kN for M12.

VI. Frequently asked questions

Q1What are the requirements for anchor transportation?
Transportation should protect against rain and moisture, handle goods with care, and avoid severe impacts; mixed transport with corrosive substances such as acids, alkalis, and salts is strictly prohibited. Avoid high-temperature exposure in summer and protect against freezing in winter. Goods should be securely fastened to avoid vibration and collision.
Q2What are the requirements for anchor storage?
Anchors should be stored in a dry, cool, well-ventilated warehouse, raised at least 100 mm off the floor, with the temperature controlled at 5-45°C and relative humidity below 60%. Anchors of different types, specifications, and strength grades should be stored separately, and a first-in-first-out management system should be established.
Q3What are the common types of anchor damage on construction sites?
Common damage includes threaded rod corrosion, thread damage, damaged or expired chemical capsules, anchor deformation, mixing of specifications, and packaging damage. Such damage directly reduces anchoring force and may even cause anchoring failure.
Q4Can expired chemical capsules still be used?
They cannot be used directly. According to GB 50550-2010, adhesives that are expired or of unknown manufacturing date are strictly prohibited from use. Products that have just passed their shelf life and have been stored in the standard manner may be used only after verification by sampling and tensile testing. Daring chemical capsules have a shelf life of 1 year.
Q5What are Daring's recommendations for anchor packaging and storage?
Daring anchor product packaging is clearly labeled with the product name, specification, quantity, production date, and shelf life. Chemical capsules have a shelf life of 1 year when stored at 20°C without direct sunlight. It is recommended that warehouses be kept dry, cool, and well ventilated and that a first-in-first-out management system be established.

The Daring chemical anchor series covers high-strength, capsule-type, special reverse-cone, and dynamic-load reverse-cone anchors, combined with Daring's DL-200E modified epoxy injection anchoring adhesive, which meets the national Class A adhesive standard. Carbon steel of grade 5.8 or above (hot-dip galvanized ≥45 μm) or 304/316 stainless steel is available. Daring products are packaged to specification and clearly labeled, with detailed storage and use instructions provided. For recommendations on anchor transportation and storage plans for specific projects, please consult the Daring technical team.

References

JGJ 145-2013 Technical Specification for Post-Installed Anchoring of Concrete Structures - Anchor storage and transportation requirements

GB 50550-2010 Code for Acceptance of Construction Quality of Strengthening Works of Building Structures - Adhesive shelf-life management

Daring website - Chemical anchor product series

Daring website - How long is the shelf life of chemical anchor capsules?

Daring website - DL-200E injection anchoring adhesive product page

Back to Daring Home  Back to Top