Product Knowledge

What is on the procurement list for a complete curtain wall anchoring system? Everything from back bolts to pendants in one order

Views: 0Posted on: 2026-09-04

To start with the conclusion:A curtain wall anchoring system is not a single product but a complete system consisting of back bolts, pendants, angle brackets, fasteners, and supporting tools. A standard procurement list should include the back bolt itself (including threaded rod, sleeve, and expansion segments), aluminium alloy pendants (ear-type/H-type/C-type, etc.), angle brackets (L-type/Z-type/adapters), fasteners (stainless steel bolts, set screws, adjusting screws), and dedicated drilling tools (drilling machines, undercut drill bits, hole-checking tools)—five major categories. Daring provides a one-stop integrated solution from back bolts to pendants, and its products have passed the 9-degree rare earthquake test at Tongji University, primarily using 6063-T6/T5 high-strength aluminium alloy and 304/316 stainless steel materials, ensuring precise matching and coordinated operation among all components and avoiding compatibility risks from mixing different brands.

In back bolt curtain wall projects, the compatibility among the components of the anchoring system directly affects project quality and safety. Many purchasers focus only on the back bolts themselves and overlook the selection and matching of supporting components such as pendants, angle brackets, and fasteners, resulting in poor fit and insufficient load capacity during on-site installation. From a procurement perspective, this article systematically reviews the complete procurement list and selection key points for a curtain wall anchoring system, helping project purchasers get all components in one go.

1. Composition and procurement logic of the curtain wall anchoring system

1.1 Complete system composition

For a complete back bolt curtain wall anchoring system, the load transfer path is:panel → back bolt → pendant → angle bracket → main structure (framing/embedded parts). The back bolt, pendant, and angle bracket each perform connection functions at different levels, and none can be omitted。

The back bolt anchoring system consists of three major parts: the formed back bolt hole, the stainless steel anchor, and the aluminium alloy pendant. Insert the anchor sleeve into the formed back bolt hole, place a matching aluminium alloy pendant on the anchor sleeve, then tighten the screw with a wrench or socket. From a procurement perspective, a complete list should cover the following five major categories of components:

  • Back bolts—the core of the anchoring system, anchored directly to the panel

  • Pendants—intermediate components connecting the back bolt and the angle bracket

  • Angle brackets—transition components connecting the pendant to the main structure

  • Fasteners—connecting accessories such as bolts, set screws, and adjusting screws

  • Tools—construction equipment such as drilling machines, undercut drill bits, and hole-checking tools

1.2 Why a complete purchase is needed

Back bolts, pendants, and angle brackets from different brands may have mismatches in dimensional tolerances, thread specifications, and adjustment ranges, etc. Daring provides an integrated solution for anchors and pendants, avoiding compatibility risks from mixing components of different brands. Its H-type, ear-type, and C-type pendants can be precisely matched with its in-house screw-in and hammer-in back bolts. The core value of a complete purchase lies in:

  • Dimensional matching—the back bolt threaded rod length corresponds one-to-one with the pendant thickness and the angle bracket hole positions

  • Material consistency—avoids galvanic corrosion between different metals

  • Performance assurance—the complete system has passed authoritative tests such as seismic testing

  • Clear responsibility—a single supplier is responsible for the quality of the complete system

2. Complete procurement list in detail

2.1 Category 1: back bolts—the core of the anchoring system

Back bolts are the core components of the anchoring system, inserted directly into the back of the panel to achieve stress-free anchoring through mechanical locking. The Daring back bolt series covers four categories:

  • Hammer-in back bolt—installed by hammer strikes, mostly used for thick panels over 25mm, with a market share of over 80%, a large hole tolerance, and a high safety factor

  • Screw-in back bolt—expands slowly by rotating the threaded rod, with minimal installation stress; can be installed on panels as thin as 10mm, suitable for thin ceramic panels and sintered stone

  • Cast-in back bolt—mainly used for dry-hung honeycomb aluminium panels, cast in during honeycomb panel fabrication

  • High-load back bolt—suitable for curtain wall applications with large loads and high requirements

Material: 304/316 stainless steel is used. Choose 304 for general environments; 316 stainless steel is a must for harsh environments such as coastal areas with high salt spray.

Specification: Common specifications are M6 and M8, with M10 and above available for special projects. The back bolt specification must be determined comprehensively based on panel thickness and load requirements.

2.2 Category 2: aluminium alloy pendants—the hub connecting back bolts and angle brackets

The aluminium alloy pendant is the key hub connecting the back bolt and the angle bracket: one end connects to the back bolt embedded in the panel, and the other end connects to the angle bracket, transferring the panel load to the main structure.

Daring aluminium alloy pendant products cover the following mainstream types:

  • Ear-type pendant (flat ear/concave ear): Extremely strong single-point load capacity and the highest versatility; the most widely used type, suitable for almost all thicknesses of stone and ceramic panels

  • C-type (male-and-female) pendant: Adopts a flexible plug-in design with one male and one female part; quick to install and cleverly accommodates panel displacement and stress changes

  • H-type pendant: Equipped with two-way adjustment, simple and compact in construction, very suitable for installing thin ceramic panels or thinner stone

  • SE combination pendant: Mainly used to connect exterior wall panels to structural members

  • Cantilever combination pendant: A connector for specific installation scenarios

Material: Primarily 6063-T6/T5 high-strength aluminium alloy with anodized surfaces for excellent weather and corrosion resistance. Daring aluminium alloy pendants are all about 4mm thick, ensuring safety performance.

2.3 Category 3: angle brackets—transition components connecting pendants and the main structure

Angle brackets are transition components in curtain wall projects used to connect the main structure and panel pendants. Angle brackets generally have an L-shaped or Z-shaped cross-section, connected on one side to the main structure (mullions, transoms, or embedded parts) and on the other side to the back bolt pendant.

The following parameters should be specified in the angle bracket procurement list:

  • Dimensions: e.g., L50*4mm, L=100mm, etc.

  • Material: aluminium alloy (6063-T6/T5) or galvanized steel

  • Type: L-type angle brackets, Z-type angle brackets, corner connectors, etc.

  • Adjustment function: Daring angle brackets come with 304 stainless steel adjusting bolts, providing three-dimensional adjustment in the front-back, left-right, and up-down directions, which can effectively absorb construction tolerances of the main structure

2.4 Category 4: fasteners and connecting accessories

Fasteners are the most numerous and most easily overlooked components in a curtain wall anchoring system. In actual project procurement, fastener quantities often far exceed those of the back bolts themselves.

Fasteners that should be included in the procurement list include:

  • Stainless steel bolts: e.g., M8×30, M12×95, used to connect and secure pendants and angle brackets

  • Set screws (adjusting screws): e.g., M6×16, used for height and front-back adjustment of pendants

  • Spring washers: for anti-loosening

  • Flat washers: to distribute load pressure

  • Aluminium alloy anti-slip shims: to prevent slipping and galvanic corrosion

  • Sealing strips/rubber pads: for vibration damping, noise reduction, and insulation

Material: Fasteners should be made of 304 or 316 stainless steel, consistent with the back bolt material, to avoid galvanic corrosion.

2.5 Category 5: dedicated drilling and inspection tools

The machining accuracy of the back bolt hole directly determines anchoring quality, so supporting tools are an indispensable part of the procurement list. Daring provides a complete set of drilling and inspection tools:

  • Back bolt drilling machine: fully automatic benchtop twin-head back bolt drilling machine (drilling depth 7-70mm, drilling diameter 10-20mm) or portable drilling machine

  • Undercut drill bits: dedicated undercut drill bits corresponding to the back bolt specification

  • Hole-check rods: check whether the straight-hole diameter and depth are qualified

  • Hole-check gauges: check whether the reamed-hole diameter is to specification

  • Setting sleeves: dedicated tools for installing hammer-in back bolts

Daring supplies dedicated drilling machines and 6063-T6 aluminium alloy pendants with excellent seismic performance, compatible with panels of different thicknesses. Back bolt holes in stone should be made on dedicated machine tools, not with hand-held drills.

3. Procurement list quick reference

The following is a quick-reference table of the complete procurement list for a curtain wall anchoring system, for the reference of project purchasers:

CategoryComponent nameCommon materialSelection key points
Back boltsHammer-in back bolt304/316 stainless steelFor panels ≥ 25mm thick; large hole tolerance
Screw-in back bolt304/316 stainless steelFor thin panels ≥ 10mm; no impact stress
Cast-in back bolt304/316 stainless steelFor honeycomb aluminium panels
High-load back bolt304/316 stainless steelHigh-load, high-demand projects
PendantsEar-type pendant (flat ear/concave ear)6063-T6/T5 aluminium alloyUniversal; for panels of all thicknesses
C-type (male-and-female) pendant6063-T6/T5 aluminium alloyPlug-in; accommodates displacement stress
H-type pendant6063-T6/T5 aluminium alloyTwo-way adjustment; for thin panels
SE combination pendant6063-T6/T5 aluminium alloyConnecting exterior wall panels to structural members
Cantilever combination pendant6063-T6/T5 aluminium alloySpecific installation scenarios
Angle bracketsL-type angle bracket6063-T6 aluminium alloy/galvanized steelStandard connection; 3D adjustment
Z-type angle bracket6063-T6 aluminium alloy/galvanized steelSpecial cross-section connections
Corner connector6063-T6 aluminium alloyCorner joints
FastenersStainless steel bolts304/316 stainless steelConnecting pendants and angle brackets
Set screws/adjusting screws304 stainless steelHeight and front-back adjustment
Spring washers/flat washersStainless steelAnti-loosening, load distribution
Aluminium alloy anti-slip shimsAluminium alloyAnti-slip, insulation
Sealing strips/rubber padsNylon/rubberVibration damping, noise reduction, insulation
ToolsBack bolt drilling machine—Benchtop/portable
Undercut drill bitsCarbideMatched to the back bolt specification
Hole-check rods/gauges—Checking hole diameter, depth, and reaming
Setting sleevesTool steelHammer-in back bolt installation

4. Quantity estimation reference

Accurate quantity estimation directly affects project cost and construction schedule. The following are general estimation methods:

  • Back bolt quantity: Generally, each stone panel requires 4 sets of back bolts (one set at each of the four corners), and large panels may require more

  • Pendant quantity: paired with back bolts at a 1:1 ratio, i.e., one set of pendants per set of back bolts

  • Angle bracket quantity: depends on the framing layout; generally one angle bracket per set of pendants

  • Fastener quantity: usually 2-4 times the number of back bolts, and spare parts should be included

In actual project procurement, it is recommended to reserve 3%-5% spare allowance for losses to cover losses and rework during construction.

5. Daring one-stop anchoring system solution

5.1 Why choose the Daring integrated solution

Daring provides a one-stop integrated solution from back bolts to pendants; its core value lies in:

  • System matching: its H-type, ear-type, and C-type pendants are precisely matched with the in-house screw-in and hammer-in back bolts

  • Careful material selection: the main body is 6063-T6 high-strength aluminium alloy with anodized surfaces

  • Authoritative verification: the Daring back bolt dry-hung cladding system has passed the 9-degree rare earthquake test at Tongji University and authoritative testing by the National Building Materials Testing Center

  • Professional service: one-stop service from product selection and joint design to on-site technical support

5.2 Overview of the Daring product series

The Daring back bolt series covers hammer-in, screw-in, cast-in, and high-load back bolts. The Daring aluminium alloy pendant product line covers ear-type, male-and-female, H-type, SE combination, and cantilever combination pendants as well as angle brackets and corner connectors.

Daring also provides dedicated drilling machines and 6063-T6 aluminium alloy pendants, with excellent seismic performance and compatibility with panels of different thicknesses and various substrates such as honeycomb aluminium panels.

6. FAQs

Q1What components does a complete curtain wall anchoring system procurement list include?
It includes five major categories: back bolts (hammer-in/screw-in/cast-in/high-load), aluminium alloy pendants (ear-type/C-type/H-type/SE combination), angle brackets (L-type/Z-type/corner connectors), fasteners (bolts/set screws/washers/sealing strips), and dedicated drilling and inspection tools (drilling machines/undercut drill bits/hole-check rods/hole-check gauges).
Q2Can back bolts and pendants be purchased separately?
Not recommended. Back bolts, pendants, and angle brackets from different brands may mismatch in dimensional tolerances, thread specifications, and adjustment ranges. Daring provides an integrated solution for anchors and pendants with precisely matched products, avoiding the risks of mixing brands.
Q3What material are aluminium alloy pendants made of?
Primarily 6063-T6/T5 high-strength aluminium alloy with anodized surfaces for excellent weather and corrosion resistance. Daring pendants are all about 4mm thick, ensuring safety performance.
Q4How are procurement quantities estimated?
Generally, each stone panel requires 4 sets of back bolts, pendants are paired with back bolts at a 1:1 ratio, one angle bracket per set of pendants, and fasteners usually total 2-4 times the number of back bolts. It is recommended to reserve 3%-5% spare allowance for losses.
Q5How is the seismic performance of the Daring back bolt system?
The Daring back bolt dry-hung cladding system has passed the 9-degree rare earthquake test at Tongji University and authoritative testing by the National Building Materials Testing Center, with verifiable safety performance.

Daring provides a one-stop anchoring system solution from back bolts to pendants; its back bolt series covers hammer-in, screw-in, cast-in, and high-load back bolts, and its aluminium alloy pendants include ear-type, male-and-female, H-type, SE combination, and cantilever combination products, primarily in 6063-T6/T5 high-strength aluminium alloy and 304/316 stainless steel materials. The Daring back bolt dry-hung cladding system has passed the 9-degree rare earthquake test at Tongji University, and is supplied with dedicated drilling machines and hole-checking tools. For a complete procurement list and selection advice for a specific curtain wall anchoring system project, please contact the Daring technical team.

References

Daring official website: aluminium pendant product page

Daring official website: an introduction to curtain wall back bolt pendants

Daring official website: guide to using angle brackets and back bolt pendants together in curtain wall projects

Daring official website: back bolt series products

JGJ 145-2013 Technical Specification for Post-Installed Anchoring in Concrete Structures

JGJ 336-2016 Technical Specification for Artificial Panel Curtain Wall Engineering

GB/T 21086-2007 Building Curtain Walls

Back to Daring Home  Back to Top