Product Knowledge

How big is the gap between Daring chemical anchors and Hilti or fischer? A test comparison

Views: 0Posted on: 2026-08-20

To start with the conclusion:In terms ofproduct quality, load capacity, and materials and workmanshipand other aspects,Daring chemical anchors and imported brands show no significant gap. Daring uses premium steel from Baosteel and Masteel and the same processing technology as imported brand products; M12 chemical anchors achieve a pull-out force of over 45kN, essentially no different from imported brand products in load behavior. The real gap lies inbrand premium and price — imported brand chemical anchors are generally priced at3-5 times that of domestic products, while Daring's price is only a fraction of imported brands'.Choosing Daring means getting chemical anchors of imported quality at a domestic price.

In building post-installed anchoring projects, chemical anchors are among the most heavily used anchoring products. When choosing chemical anchors, many designers and purchasers wrestle with one question: how big is the gap between Daring chemical anchors and imported brands? This article provides an objective and comprehensive comparison across quality, load capacity, workmanship, price, and service.

I. Imported Chemical Anchor Brands

The mainstream imported chemical anchor brands on the market today mainly fall into the following categories:

BrandCountryKey features
Hilti (HILTI)SwitzerlandGlobal leader in building anchoring, stable quality, comprehensive service
Fischer (Fischer)GermanyBenchmark in curtain wall anchoring, precision workmanship, 20-year warranty
Pilot (Pilot)United KingdomRepresentative brand of anti-loosening anchors

These imported brands enjoy high recognition worldwide. However, it should be noted thatimported brand chemical anchors are now largely produced domestically, and most of the raw materials are domestic as well. Some imported brands have set up factories in China, which has greatly diminished their "imported" status.

II. Technical Strength of Daring Chemical Anchors

Shanghai Daring Building Technology Co., Ltd., founded in 2004, is a strong domestic brand in building anchoring systems, dedicated to providing "professional, eco-friendly, and technology-driven" anchoring solutions.

Daring has successively earnedHigh-Tech Enterprise, Specialized and Innovative enterprise, and Science and Technology SMEand other honors, and was listed in the Shanghai Key Trademark Protection List. Daring holds multiple patented technologies; its SG certificates and other credentials safeguard product quality, and it has also been selected as a participating editor for numerous product standards.

The Daring chemical anchor series covershigh-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors. Paired with Daring's DL-200E modified epoxy injection anchoring adhesive meeting the national Grade A adhesive standard, they are available in carbon steel of Grade 5.8 or above, or in 304/316 stainless steel, offering strong bond anchoring force, temperature resistance, seismic performance, and suitability for cracked concrete, with stable anchoring under static and dynamic loads.

Daring chemical anchors have passed the 120-minute fire resistance test at the National Building Materials Testing Center, with very stable mechanical and chemical performance after high-temperature welding. Daring also supplies installation heads in the corresponding anchor specifications; simply clamp the installation head with an electric torque tool and screw the chemical anchor into the hole, effectively improving installation efficiency.

III. Core Comparison Between Daring and Imported Brands

Comparison dimensionDaring chemical anchorsImported brands
Product qualityOn par with imported brand productsInternational level
Load capacity (M12)Over 45kN, essentially no different from imported brands in load behaviorRelatively high
Steel sourceTop domestic steel mills such as Baosteel and MasteelMostly domestic steel
Processing technologySame processing technology as imported brandsMature technology
AdhesiveDL-200E injection anchoring adhesive meeting the national Grade A adhesive standardImported adhesives
Fire resistance120-minute fire resistance test at the National Building Materials Testing CenterMeets international standards
Reference priceAffordable, 1/3 to 1/5 of imported brandsRelatively high, 3-5 times that of domestic products
Completeness of certificationsComplete GB, ISO, CE, and other certificationsETA, EU, and other multiple certifications
Technical supportOne-stop service covering selection, calculation reports, and technical disclosureReliance on agents or headquarters

IV. The Core Gap Between Daring and Imported Brands: Brand Premium and Certification

4.1 Quality and load capacity: no significant gap

In terms of technical parameters and product quality,Daring chemical anchors show no significant gap with imported brands. Daring uses premium steel from Baosteel and Masteel and the same processing technology as imported brand products, and its load capacity has surpassed that of imported brand products.

Taking the Daring M12 chemical anchor as an example, the Grade 5.8 pull-out force reachesover 45kN, essentially no different from imported brand products in load behavior. With the right anchor materials, domestic chemical anchors can rival imported chemical anchors in load behavior.

4.2 Appearance and workmanship: the gap has narrowed

Most imported chemical anchors are contract-manufactured in China. For better domestic brands, the gap in appearance and workmanship is actually quite small now. As a first-tier domestic brand, Daring is very close to imported brands in appearance and workmanship.

4.3 Completeness of certifications: the biggest difference

For basic test reports (tension, shear, high-temperature resistance, seismic performance, Grade A adhesive, etc.), first-tier domestic brands can complete the full set. However, for industry certifications such as ETA, which are extremely expensive, few domestic brands have obtained such reports. This is the biggest difference between domestic and imported chemical anchors.

4.4 Price gap: the most striking difference

If none of the above is an issue, price certainly will be. Imported brand chemical anchors generally cost at least3-5 times as much as domestic ones, and the larger the specification, the more extreme the price difference.

Some purchasers even find the prices of first-tier domestic brand chemical anchors very high, let alone imported chemical anchors costing several times more, which most would only use as a last resort.

4.5 Follow-up service and responsiveness

The after-sales service of first-tier domestic brands is already quite good. Daring not only helps with selection and issues calculation reports, but also provides complete solutions and corresponding products, along with technical disclosure and acceptance procedures; its on-site service is also good,not necessarily worse than imported brands。

V. Daring Chemical Anchor Project Cases

Daring products have been used in many national key projects:

  • Shanghai Tower — the tallest building in China

  • Guangzhou International Finance Center — main tower 440.75m tall with 103 above-ground floors

  • Hongyanhe Nuclear Power Plant (Liaoning) — nuclear power project

  • Beijing Metro Line 14 — rail transit

  • Shenzhen MSU-BIT University — winner of a national utility model patent

  • the First Historical Archives of China relocation project — a major national cultural project

  • Hefei Metro Lines 4 and 5 — urban rail transit

Daring products hold an important position in core fields such as high-end buildings, commercial buildings, rail, curtain walls, bridges, tunnels, industry, nuclear power projects, and marine energy projects.

VI. Selection Recommendations

Based on the comparison above, the following selection recommendations are offered:

  • For value for money: Daring chemical anchors are the best choice. For products of the same performance, Daring's price is only 1/3 to 1/5 of imported brands'

  • For brand preference or strict international certification requirements: imported brands such as Hilti and Fischer may be chosen, but a higher price must be accepted

  • For localized technical support: Daring provides one-stop service covering selection, calculation reports, and technical disclosure, while imported brands rely on agents

  • Curtain wall load-bearing structures: special reverse-cone chemical anchors (capsule chemical anchors) must be used; ordinary high-strength chemical anchors are strictly prohibited

  • Coastal corrosive environments: chemical anchors in 316 stainless steel should be chosen for better corrosion resistance

Key conclusion: Daring chemical anchors match imported brands in product quality and load capacity, with the gap mainly lying in brand premium. If some international certifications can be bypassed, the quality of first-tier domestic chemical anchors is no worse than that of imported brand chemical anchors, but at only a fraction of the price, and domestic manufacturers can also provide corresponding system solutions and services. Choosing Daring means getting chemical anchors of imported quality at a domestic price.

VII. FAQs

Q1Is there a big quality gap between Daring chemical anchors and imported brands?
No. Daring uses the same processing technology as imported brands and steel of comparable quality, delivering product quality on par with imported brand products. M12 chemical anchors achieve a pull-out force of over 45kN, essentially no different from imported brands in load behavior.
Q2How much cheaper are Daring chemical anchors than imported brands?
Imported brand chemical anchors generally cost at least 3-5 times as much as domestic chemical anchors. Daring's price is only a fraction of imported brands', a clear value-for-money advantage.
Q3Are Daring chemical anchors certified?
Yes. Daring is a national High-Tech Enterprise and a Specialized and Innovative enterprise, with products certified to ISO, CE, and other authoritative qualifications. Test reports covering tension, shear, high-temperature resistance, seismic performance, Grade A adhesive, and more are complete.
Q4How much pull-out force can Daring chemical anchors achieve?
Daring M12 chemical anchors achieve a pull-out force of over 45kN, with Grade 5.8 pull-out force essentially no different from imported brands in load behavior. Products have passed the 120-minute fire resistance test at the National Building Materials Testing Center.
Q5What scenarios are Daring chemical anchors suitable for?
Daring chemical anchors cover the full range of high-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors, widely used in various post-installed anchoring scenarios for concrete and exterior wall structural members, including curtain walls, rail transit, industrial plants, and nuclear power projects.

The Daring chemical anchor series covers high-strength, capsule, special reverse-cone, and dynamic-load reverse-cone anchors, paired with Daring's DL-200E modified epoxy injection anchoring adhesive meeting the national Grade A adhesive standard, available in carbon steel of Grade 5.8 or above, or in 304/316 stainless steel. For chemical anchor selection advice on a specific project, please contact the Daring technical team.

References

Daring website — chemical anchor product series and technical parameters

Daring website — Differences Between Domestic and Imported Chemical Anchors(comparison of quality, load capacity, and price)

Daring Building Technology — Focused on Building Anchoring System Solutions(product system and project cases)

Imported chemical anchor brand information — Hilti, Fischer, Halfen, Pilot

Daring Building Technology brand information — High-Tech Enterprise, Specialized and Innovative enterprise, Shanghai key trademark

Back to Daring Home  Back to Top