Product Knowledge

Mechanical anchor types explained: undercut, self-undercutting and expansion anchors

Views: 0Posted on: 2026-08-18

The bottom line first:Mechanical anchors are mainly divided intoundercut anchorsandexpansion anchorsinto two categories. Undercut anchors achieve anchorage through themechanical interlockformed between the undercut at the bottom of the anchor hole and the anchor's expansion elements, making them the only choice for load-bearing structures; expansion anchors, by contrast, work through thefriction to form anchoring, suitable for general non-load-bearing fixings. Undercut-type anchors are further divided by reaming method into post-undercutting (mould undercutting) and self-undercutting (self-cutting) types. Curtain walls and other load-bearing structures should use undercut or self-undercutting anchors; expansion anchors are strictly prohibited in load-bearing structures.

Mechanical anchors are among the most widely used anchor products in post-installed anchoring work, applied in anchoring scenarios such as curtain walls, steel structures, heavy equipment, rail transit, and tunnel utility corridors. Faced with the wide variety of mechanical anchor products on the market, many designers and purchasers easily confuse concepts such as "undercut", "self-undercutting", and "expansion anchors". This article systematically reviews the classification of mechanical anchors in terms of working principle, installation method, load capacity, and application scenarios.

1. Basic definition of mechanical anchors

In the industry, all non-chemical-bond-type anchors are generally referred to as mechanical anchors. According to the definition in JG/T 160-2017 Mechanical Anchors for Concrete, a mechanical anchor is an anchor thatA component that anchors in a concrete base material through the friction or interlocking action between the anchor and the drilled hole, with its main load-bearing components made of metal, including fasteners (threaded rod, nut, washer), the cone tip, and expansion elements (expansion sleeve or expansion segments).

From the perspective of materials and anchoring principles, post-installed anchors for concrete can be divided intoMetal anchorsandchemical anchorsinto two categories. Metal anchors achieve anchoring entirely through mechanical action, with only two materials — steel and concrete — involved in load transfer.

According to the definitions above, mechanical anchors can be roughly divided intomechanical interlock anchorsandexpansion-friction anchorsinto two categories. These two types of anchors differ fundamentally in load-bearing principles, installation methods, safety performance, and scope of application.

2. The two mainstream categories of mechanical anchors

2.1 Undercut anchors (mechanical interlock type)

Undercut anchors are anchors that form their anchorage through theinterlocking actionbetween the undercut at the bottom of the anchor hole and the anchor's expansion elements. This bond is a mechanical interlock — a form-fit bond between the anchor's metal parts and the concrete — and is generally regarded asa more reliable anchoring method than friction expansion。

Based on the sequence of the undercutting process, undercut anchors can be divided intoundercut anchors (mold-undercut anchors)andself-undercutting anchors (self-cutting anchors).

Undercut anchors(also known as mold-undercut anchors, post-cut anchors, or pre-reamed anchors) are a highly mature product among building anchors, with excellent load capacity and seismic performance. During installation, a straight hole is drilled into the base material first, and then aspecialized undercut drilling bitis used to ream the bottom of the hole a second time, creating a wedge-shaped hole that is wider at the bottom and narrower at the top. The anchor is then inserted, and hammering causes the expansion mechanism to open within the bottom undercut, forming a mechanical interlock.

Self-undercutting anchors(also known as self-cutting anchors or self-reaming anchors) do not require a separate reaming step. During installation, acutting headmounted on the expansion mechanism rotary-cuts and presses outward at the bottom of the anchor hole, completing the undercut and installation simultaneously. The installation process for self-undercutting anchors is relatively simple, and they are mostly used for anchoring between concrete and other high-load structural elements.

Self-undercutting anchors have an anchoring mechanism similar to that of undercut anchors, but without the separate reaming operation, and their safety performance is also good. The main difference between the two lies in the reaming method: undercut anchors require a specialized reaming bit to pre-ream the hole, while self-undercutting anchors complete the undercut with their own cutting heads during installation.

2.2 Expansion anchors (expansion-friction type)

Expansion anchors are anchors that form their anchorage through thefrictionbetween the anchor and the anchor hole. When tightening torque is applied, the expansion segments or expansion sleeve press against the concrete wall; the resulting pressure generates friction that prevents the anchor from being pulled out of the concrete.

Expansion anchors mainly come insleeve-type (shell-type)andexpansion-segment (smooth-rod) designs. Representative products include sleeve expansion anchors, drop-in anchors, and Anka anchors (machine screw anchors).

Expansion anchors only require a straight hole for installation; once the expansion elements are compressed, they develop considerable friction against the hole wall. Their advantage issimple installation with immediate load readiness, but their load-bearing performance generally falls short of mechanical interlock anchors.

3. A closer look at common mechanical anchor products

3.1 Undercut anchors (mold-undercut anchors)

Undercut anchors are themost mature and most widely usedproducts among undercut anchors. Daring undercut anchors are made of carbon steel of grade 5.8 or higher, or 304/316 stainless steel. Mechanical locking makes them ready for load immediately upon installation with no curing time; they offer high load capacity along with seismic and fatigue resistance, and are suitable for cracked and uncracked concrete.

Key features:

  • Installation method: drilling → secondary reaming (specialized undercut bit) → anchor installation

  • Load-bearing principle: mechanical interlock (form-fit bond between the anchor's metal parts and the concrete)

  • Load capacity: extremely high; pull-out tests end only in anchor steel fracture or concrete cone failure

  • Suitable base materials: cracked concrete, uncracked concrete

  • Application scenarios: curtain wall load-bearing structures, steel structures, heavy equipment, rail transit

  • Code requirements: mechanical anchors used in load-bearing structures must be undercut anchors with an interlock effect

3.2 Self-undercutting anchors (self-cutting anchors)

Self-undercutting anchors are undercut-type mechanical anchors with a relatively simple installation process, mostly used for anchoring between concrete and other high-load structural elements. Daring self-undercutting anchors are made of carbon steel/stainless steel; mechanical locking makes them ready for load immediately upon installation with no curing time, and they are suitable for cracked concrete, uncracked concrete, natural stone, and other base materials.

Key features:

  • Installation method: drilling → rotary-press installation (no separate reaming required)

  • Load-bearing principle: mechanical interlock (undercut formed by the cutting head)

  • Load capacity: high, with good safety performance

  • Suitable base materials: cracked concrete, uncracked concrete

  • Installation efficiency: high (undercutting and installation completed simultaneously)

  • Precautions: the market contains expansion anchors passed off as self-reaming anchors; the way to tell them apart is to check whether the expansion mechanism has a cutting head and exhibits rotary cutting and compression-expansion behavior

3.3 Sleeve expansion anchors

Sleeve expansion anchors are classic mechanical anchors that work by radial expansion pressing against the hole wall. They consist of a threaded rod, an expansion sleeve, a flat washer, a spring washer, and a nut. Tightening the nut presses the cone tip firmly against the sleeve; the sleeve expands against the hole wall, creating a friction lock that holds the anchor in place.

Key features:

  • Installation method: drilling → inserting the anchor → tightening the nut

  • Load-bearing principle: friction locking (radial expansion squeezing the hole wall)

  • Load capacity: average

  • Suitable base materials: non-cracked concrete

  • Installation efficiency: ready to load immediately, no waiting

  • Application scenarios: general side-fixing and overhead-fixing of objects

  • Load-bearing structures: strictly prohibited in load-bearing structures

3.4 Drop-in anchors

The drop-in anchor is one of the most representative expansion anchors. Daring drop-in anchors are made of grade 5.8 or higher carbon steel or 304/316 stainless steel and can be used for fixing structural components or installing equipment under medium and light loads on non-cracked/cracked concrete and natural stone.

Key features:

  • Installation method: installation is very convenient

  • Suitable base materials: cracked/non-cracked concrete and natural stone

  • Load-bearing principle: expansion friction

  • Load capacity: medium and light loads

3.5 Anka anchors (sleeve anchors)

The Anka anchor is one of the representative expansion-friction anchors and is widely used. Daring Anka anchors use carbon steel/stainless steel with a multi-layer coating process; mechanical locking achieves immediate fixing upon installation with no curing required, and they are compatible with multiple base materials such as cracked/non-cracked concrete and natural stone.

Key features:

  • Load-bearing principle: expansion friction

  • Suitable base materials: cracked/non-cracked concrete and natural stone

  • Application scenarios: general object fixing

  • Load-bearing structures: strictly prohibited in load-bearing structures

3.6 Concrete screw anchors

The concrete screw anchor is a special mechanical anchor that completes anchoring through the anchor's own hard threads cutting helical grooves into the wall of the drilled hole. Its installation principle is similar to driving a self-tapping screw into wood; the anchor is generally made of grade 12.9 steel, which keeps its own structure intact while cutting into the concrete.

Concrete screw anchors perform well under load; pull-out tests usually produce concrete cone failure. Notably, the installation of concrete screw anchors is reversible, making them suitable for temporary anchoring. Daring cone-cylinder self-cutting anchors are made of grade 12.9 or higher carbon steel or 410 stainless steel and can be fully removed after installation.

4. Comparison table of mechanical anchor types

Comparison dimensionUndercut anchorSelf-undercutting anchorExpansion anchor
Anchoring principleMechanical interlockMechanical interlockFriction
Reaming methodSecondary reaming with a dedicated drill bitSelf-reaming with its own cutting tipNo reaming required
Installation complexityRelatively high (secondary reaming required)Moderate (installed by rotation and pressing)Simple
Load capacityExtremely highHighAverage
Cracked concrete suitabilitySuitableSuitableNot suitable
Installation waiting timeReady to load immediatelyReady to load immediatelyReady to load immediately
Seismic performanceSuperiorGoodAverage
Curtain wall load-bearing suitabilitySuitableSuitableStrictly prohibited

5. Mandatory requirements for load-bearing structures

According to Article 16.1.3 of GB 50367-2013, Design Code for Strengthening Concrete Structures:

  • Mechanical anchors used in load-bearing structures must be undercut anchors with an interlock effect. Based on their construction, these anchors are further divided into self-undercutting, mold-undercut, and adhesive-mold-undercut types.

  • Adhesive anchors used in load-bearing structures must be special reverse-cone adhesive anchors。

According to Article 16.1.4 of GB 50367-2013:In structures in seismic design zones and in members subject directly to dynamic loads, expansion anchors must not be used as connections in load-bearing structures。

In brief:

  • Load-bearing structures must use: undercut anchors and self-undercutting anchors (undercut-type anchors with an interlock effect)

  • Load-bearing structures must never use: expansion anchors (sleeve expansion anchors, drop-in anchors, Anka anchors, etc.)

6. Selection decision guide

Situations favoring undercut anchors

  • Curtain wall load-bearing structures: the code mandates the use of undercut anchors with an interlock effect

  • Seismic design zones: undercut anchors offer excellent seismic performance

  • Extremely high load capacity requirements: pull-out tests end only in anchor steel fracture or concrete cone failure

  • Cracked concrete base materials: undercut anchors are suitable for cracked concrete

  • Major projects: steel structures, heavy equipment, rail transit, tunnels and utility corridors

Situations favoring self-undercutting anchors

  • Higher load capacity with installation efficiency as the priority: no separate reaming required; convenient to install

  • Anchoring of high-load structural elements: mostly used for anchoring between concrete and other high-load structural elements

  • Curtain walls and other load-bearing structures: self-undercutting anchors are undercut-type anchors with an interlock effect and can be used in load-bearing structures

  • Scenarios where self-undercutting anchors replace undercut anchors: in actual construction, self-undercutting anchors are often used in place of undercut anchors

Situations favoring expansion anchors

  • Fixing of non-load-bearing structures: general side-mounted or overhead-mounted items

  • Tight schedules: ready to load immediately after installation, with no waiting

  • Cost sensitivity: expansion anchors are relatively inexpensive

  • Light to medium loads: equipment installation, pipe fixing, etc.

  • Non-seismic zones: strictly prohibited in load-bearing structures in seismic design zones

7. Frequently asked questions

Q1What is the difference between undercut anchors and self-undercutting anchors?
Both are undercut-type mechanical anchors; the main difference lies in how the undercut is produced. Undercut anchors require drilling a straight hole first and then reaming it a second time with a specialized undercut bit. Self-undercutting anchors need no separate reaming; their own cutting heads rotary-cut the undercut during installation. Undercut anchors offer superior load capacity, while self-undercutting anchors are quicker to install.
Q2Why can't expansion anchors be used in curtain wall load-bearing structures?
GB 50367-2013 states explicitly that expansion anchors must not be used as connections in load-bearing structures in seismic design zones or in members subject directly to dynamic loads. Expansion anchors rely on friction; under dynamic loads or earthquakes they can slip out of the hole, their load capacity is unstable, and safety cannot be guaranteed.
Q3How do you tell self-undercutting anchors from expansion anchors?
Self-undercutting anchors have cutting heads on their expansion mechanism and exhibit rotary cutting and compression-expansion behavior during installation. Expansion anchors have no cutting head and rely solely on expansion elements pressing against the hole wall to generate friction. If a product claiming to be a self-reaming anchor has no cutting head on its expansion mechanism, it is an expansion anchor passed off as a self-reaming anchor.
Q4What category do concrete screw anchors belong to?
Concrete screw anchors are a special type of mechanical anchor that form their anchorage by cutting their hard threads into the hole wall. Although JG/T 160-2017 classifies them as mechanical anchors, their working principle differs from both undercut and expansion types. Installation is reversible, so they can be used for temporary anchoring.
Q5What mechanical anchor products does Daring offer?
The Daring mechanical anchor range covers undercut anchors, self-undercutting anchors, drop-in anchors, Anka anchors, heavy-duty mechanical anchors, and more. Made of carbon steel/stainless steel with multi-layer coating processes, they achieve mechanical locking — locked upon installation with no curing time — with high load capacity, seismic and fatigue resistance, and compatibility with cracked/uncracked concrete, natural stone, and other base materials. They are widely used in curtain walls, steel structures, heavy equipment, rail transit, tunnels and utility corridors, and many other anchoring scenarios.

The Daring mechanical anchor range covers undercut anchors, self-undercutting anchors, drop-in anchors, Anka anchors, heavy-duty mechanical anchors, and more. Made of carbon steel/stainless steel with multi-layer coating processes, they achieve mechanical locking — locked upon installation with no curing time — with high load capacity, seismic and fatigue resistance, and compatibility with cracked/uncracked concrete, natural stone, and other base materials. Daring undercut anchors offer superior load capacity and seismic performance and are suitable for curtain wall load-bearing structures; self-undercutting anchors are quick to install and commonly used for anchoring high-load structural elements; drop-in and Anka anchors are easy to install and suitable for light to medium-duty fixing. For mechanical anchor selection advice on a specific project, please contact the Daring technical team.

Back to Daring Home  Back to Top