Dry-hung curtain wall panels are dominated by the back bolt and slotted methods. Although back bolt stone curtain walls are relatively safer, their overall market share is not high, and the slotted method still commands the bulk of the market—yet the adhesive used in slotted hanging has long been criticized.
Pendant selection for slotted hanging
Since the dry-hung stone curtain wall method was introduced, slotted pendants have come in many varieties. However, because domestic codes are incomplete, all kinds of slotted pendants are currently in use, and the safety and maintenance difficulty of some remain highly controversial.
Currently, the SE combination pendant offers better safety and lower maintenance difficulty than other pendants, along with certain seismic performance, and is the slotted pendant promoted in regions such as Beijing, Shanghai, and Zhejiang.
Which adhesive for slotted hanging?
JGJ 133-2001 Technical Specification for Stone Curtain Wall Engineering and Its Commentary contains the following statement:
6.3.7 After cutting and slotting, stone debris shall be rinsed off with water, and the stone panel and stainless steel pendant shall be bonded with an epoxy-type stone-specific structural adhesive.
JC 887-2001 Epoxy Adhesives for Dry-Hung Stone Curtain Walls states the following on its scope:
This standard applies to two-component epoxy adhesives used for bonding and fixing between dry-hung stone curtain wall pendants and stone.
Both indicate that slotted hanging should use two-component epoxy adhesive, the so-called AB adhesive, yet many construction projects misuse marble adhesive.
Misuse of marble adhesive is widespread
Marble adhesive differs greatly from epoxy adhesive: it cures quickly, has poor weather resistance, and ages easily. It is an unsaturated resin adhesive and can only be used as a stone-specific adhesive. Two-component epoxy adhesive, on the other hand, is the structural adhesive for dry-hung curtain walls; although it cures slowly, it has excellent weather resistance, withstands humid, high-temperature, and corrosive environments, and offers good aging resistance and high strength, making it the ideal adhesive for dry-hung curtain walls.
Since marble adhesive cannot be used for dry-hung stone, why do some still use it secretly? On one hand, marble adhesive cures quickly—panels can go on the wall within half an hour—whereas epoxy adhesive may take days, so some choose marble adhesive to save time and effort. On the other hand, marble adhesive is cheap, which is probably the main reason for its widespread misuse in the construction market. Although safety cannot be guaranteed with marble adhesive, there are always those who, for money, defy universal disapproval.
