I previously wrote an article on chemical anchor brands that briefly explained how to select chemical anchors. After careful consideration, however, I realized there is an even more important selection factor: nut compatibility. Here is a brief addition on this point.
The importance of thread compatibility
When most purchasers evaluate anchors, they focus only on the anchor itself and ignore the importance of the matching nut. As for manufacturers, most produce only anchors and not nuts, which can lead to compatibility problems. Having visited many construction sites, I have seen many such cases: the threaded rod diameter of non-standard anchors is generally below the national standard, so combining non-standard anchors with standard nuts results in severe nut wobble. If a pull-out test is performed with equipment clamping the nut, the mechanical performance is generally poor, and the results usually show thread stripping of the anchor or nut, which means the anchor's tensile performance is severely compromised. Therefore, when purchasing anchors, choose manufacturers that comply with national standards; if budget constraints really make that impossible, you will have to conduct the relevant tests yourself according to the national standards.
The importance of nut grade
In addition, there is another critical industry problem: mismatched nut grades. As we know, standard anchors come in grades 4.8, 5.8, 6.8, and 8.8, and some high-strength anchors even reach grade 10.9. However, the peculiar industry practice is that regardless of the anchor grade, the matching nut is always a grade 4 nut.This limits the overall performance of the anchor on the one hand, and on the other creates elevated safety hazards for projects with demanding load requirements, especially those that test the anchor's tensile performance, such as anchors installed inverted to suspend heavy loads.
Conclusion
In actual construction, the role of the nut must never be overlooked, which is why many projects use double nuts. In my view, the compatibility of the nut's thread and strength grade are two key indicators of whether an anchor can deliver its tensile performance. If either falls short of standard, even the best-performing anchor cannot function properly and may even create hidden safety hazards.
