Product Knowledge

How long is an injection anchoring adhesive test report valid?

Views: 0Posted on: 2019-03-21

As a type of high-quality structural strengthening material, injection anchoring adhesive is often used in relatively high-end projects. However, the validity period of test reports has long been in doubt, causing persistent disagreements between contractors and purchasers on one side and anchoring adhesive manufacturers on the other. This article examines the issue in detail to give readers a basic understanding.

Anchoring adhesive

Figure 1: Injection anchoring adhesive

Common test reports

For the party being tested, the vast majority of testing takes the form of sample submission. In such cases, the testing body only needs to issue the corresponding test results without even judging whether the results are acceptable, and the report will state that "the test results are valid only for the submitted sample." This is what is known as "entrusted inspection", and the explanatory notes of GB 50728-2011 Technical Specification for Safety Appraisal of Structural Strengthening Materials in Engineering contain the following statement:

3.0.7 One of the main reasons why the performance and quality of strengthening materials and products in China have been deteriorating is the lack of responsibility on the part of testing institutions, which manifests itself in the issuance of irresponsible test reports stating "results valid only for the submitted sample" in order to evade accountability.

I think this is the essence of the problem: third-party testing centers charge high fees and the variety of tests is extensive, while building materials come in a huge variety of types, models, and specifications, making it difficult for ordinary enterprises to have the profit to support these reports. As a result, third-party testing institutions have unanimously introduced commissioned testing as a form of inspection, occupying the market at a relatively lower price. This way, manufacturers can account to their customers, and testing institutions bear no risk at all — a perfect match. But then, how can domestic product quality improve overall?

Validity period of injection anchoring adhesive reports

Codes that clearly specify the validity period of test reports are very few. To be precise,commissioned reports have no validity period as such. Reports with a validity period are mostly special reports. Injection anchoring adhesive is one kind of strengthening material, subject to GB 50728-2011 Technical Standard for Safety Appraisal of Strengthening Materials for Engineering Structures, which stipulates:

3.0.7 Structural strengthening materials or products that pass safety testing shall be issued a safety appraisal report. The test report attached to the appraisal report shall specify in detail the sampling rules, sampling objects, sampling methods, and time used in testing. The test report shall not use wording such as "this report is only responsible for the samples received"; if such wording exists, the report is invalid.

3.0.8 The qualification retention period for engineering strengthening materials or products that pass safety appraisal is 4 years.

In short,for strengthening materials or products that pass the appraisal report, the validity period of the report is 4 years. At this point, the question about the validity period of injection anchoring adhesive reports is very clear. Only injection anchoring adhesive reports that have passed safety appraisal have a validity period of 4 years; other reports have no validity period as such. Butin fact, few enterprises carry out this kind of certification, since a full set of certifications like this costs at least several hundred thousand yuan, and it only covers a single model of a single product. Whether that money can be recouped within four years is questionable, let alone the profits a company should rightfully earn.


Back to Daring Home  Back to Top