As a building anchor with excellent cost performance, chemical anchors have always held a high market share in China. However, chemical anchors must be used with the corresponding chemical agents or injection anchoring adhesive, and installation takes a certain period of time. So looking only at the chemical agent, how long does it take to cure before construction can continue?
Types of chemical agents
To understand the curing time of chemical agents, we first need to know the types of chemical agents. JGJ 145-2013 Technical Specification for Post-Installed Anchoring in Concrete Structures contains the following provisions:
3.3.4 The anchoring adhesive for chemical anchors shall be selected as capsule type or mechanically injected type according to the application object and site conditions. The performance of mechanically injected anchoring adhesive shall comply with the relevant provisions of the current industry standard Anchoring Adhesive for Concrete Structure Engineering JG/T 340.The anchoring adhesive for chemical anchors shall be modified epoxy resin or modified vinyl ester material.
Injected anchoring adhesive will not be discussed for now. The above statement clearly specifies that the anchoring adhesive for chemical anchors shall be modified epoxy resin or modified vinyl ester material. The two differ considerably: modified epoxy resin anchoring adhesive cures slowly — at 20°C, complete curing may take more than 30h — but it is cheaper than vinyl resin. Modified vinyl resin cures faster, curing within 1-2 hours at 20°C, but it is more expensive. For more about vinyl resin, search online yourself.
However, to reduce costs, domestic manufacturers mostlyuse non-vinyl unsaturated resin (vinyl resin is one type of unsaturated resin) mixed with diluents as the curing material for glass capsules. Because the overall performance gap is small and it is cheaper, it is favored by major chemical anchor manufacturers. In actual use, although the scheme of using unsaturated resin as the capsule material is not recognized by the codes, the actual results are still acceptable; in contrast, few manufacturers use modified epoxy resin as the curing material for capsule tubes.
Curing times differ
The word "modified" was mentioned above. It refers to a method of improving one or more properties of the resin, but the anchoring adhesives adjusted by each company achieve different results, overall performance varies considerably, and curing times also differ to some extent. Here is a rough curing time for code-compliant modified vinyl resin capsules.
Table 1. Curing time
Substrate temperature | Curing time |
-5~0℃ | <12h |
0~10℃ | <3h |
10~20℃ | <1.5h |
>20℃ | <1h |
The data in the table above are for reference only, after all, the curing times of chemical capsules from different manufacturers all differ. For colder regions, such as northern areas in winter, if high-strength chemical anchors are used for outdoor construction, they will fail to cure and become ineffective. In that case, alternative solutions for chemical anchor installation at low temperatures should be considered.
