Having learned abouthow to choose screw-in back bolts for dry-hung ceramic tile cladding, let us discuss the installation technique of screw-in back bolts. Compared with hammer-in back bolts, screw-in back bolts have higher hole-making requirements and are more complex to install; however, because of their special attribute of being installable in thin panels, we cannot abandon this solution. Therefore, we must pay more attention during construction to ensure precision and thus guarantee safety.
Classification of screw-in back bolts
As the only mainstay for dry-hung cladding of thin panels such as ceramic tile, screw-in back bolts are mainly divided into two types: two-piece back bolts and three-piece back bolts, which are the two forms of screw-in back bolts. At present, the three-piece back bolt is commonly used on the market, but the author is of the opinion thatTwo-piece back bolts may be more practical。

Figure 1. Three-piece back bolt (left) and two-piece back bolt (right)
How to install screw-in back bolts
After planningthe layout of back bolt hole positions on the panel,use a back bolt drilling machine to drill holes of the corresponding size in the panel, then install the back bolt and pendant. Taking a three-piece back bolt as an example, its installation steps are as follows:
(1) Remove the flange nut of the back bolt and set it aside, insert the set screw and the back bolt head into the hole (with the hexagonal part of the back bolt head exposed);
(2) Use a wrench to hold the hexagonal part of the back bolt head, and use a torque drill or hex key wrench to screw in the set screw;
(3) Place the flexible washer and the matching aluminium alloy pendant onto the back bolt;
(4) Screw in the flange nut.

Figure 2. Hex key wrench for screw-in back bolts
It is worth noting that three-piece back bolts can easily punch through the panel during installation, which requires construction personnel to have some experience in order to effectively reduce the panel breakage rate. In addition, the installation of two-piece back bolts is similar to that of three-piece ones, except that the hex key wrench is replaced with an external hex wrench. Screw-in back bolts are generally used with recessed ear-type pendants, recessed H-type pendants, and C-type pendants, of which the first two are more commonly used.
