Product Knowledge

How to use drop-in expansion anchors (with diagrams)

Views: 0Posted on: 2018-08-06

The drop-in expansion anchor, also known as the drop-in hammer anchor, is an anchor with relatively good expansion capability. In China, due to incomplete standards, its usage has always been limited, but export trading companies have consistently shipped very large quantities. As time goes on, domestic standards will gradually be completed, and the usage of drop-in expansion anchors will continue to increase.


Drop-in expansion anchor

Figure 1. Drop-in expansion anchor

During installation of the drop-in expansion anchor, a matching setting rod is used; manufacturers generally provide it free of charge with shipments. Its installation steps are as follows:

(1) Use a straight-hole drill bit to drill a hole of the corresponding diameter and depth;

(2) Use a blower aimed at the hole to blow out dust until no dust comes out of the hole;

(3) Insert the drop-in expansion anchor into the hole;

(4) Use a hammer together with the setting rod to strike the inner core so that the expansion segments expand;

(5) Place the object to be anchored and then screw in the hex bolt to complete the anchoring.


Drop-in expansion anchor installation steps

Figure 2. Installation steps of the drop-in expansion anchor

P.S. For the drill hole diameter, refer to the drop-in expansion anchor introduction on our official website.



Back to Daring Home  Back to Top