Product Knowledge

How to use concrete screw anchors (with diagrams)

Views: 0Posted on: 2018-07-26

Before 2017,concrete screw anchorshad a hard time finding a market in China. Some manufacturers could only export this product because there was no relevant domestic standard to support it, until JGT 160-2017 'Mechanical Anchors for Concrete', which came into effect in December 2017, mentioned the application requirements for this product.

Concrete screw anchor

Figure 1 Concrete screw anchor

From a manufacturer's perspective, the concrete screw anchor is a fairly reliable product. Compared with expansion anchors, it is simple to install and its anchoring mechanism is a distinctive form of mechanical locking rather than friction-based load transfer, making it a very cost-effective product.

After 2018, the application scenarios and quantity of concrete screw anchors should continue to grow. Since many people are using this product for the first time, here we have compiled its construction process:

(1) Use a straight-hole drill bit to drill a hole of the corresponding diameter and depth;

(2) Use a blower aimed at the hole to blow out dust until no dust comes out of the hole;

(3) Use a torque electric drill to screw in the concrete screw anchor to complete the anchoring.

Concrete screw anchor installation steps

Figure 2 Concrete screw anchor construction process

P.s.For drill hole diameter and depth, refer tothe concrete screw anchor introduction on our official website. It is worth noting thatthere are many types of concrete; if it is to be used in high-strength concrete (such asC60), considering that its installation torque requirement is relatively high, the working conditions should be communicated to the supplier so that they can select a product with correspondingly taller teeth, so as to avoid excessive installation difficulty.



Back to Daring Home  Back to Top