First, the conclusion:Cast-in channels for nuclear power projects are thefoundation components, whose seismic grade and quality traceability requirements are far higher than those of ordinary building anchoring products. According toT/CCES 29-2022, Standard for Design of Cast-in Channel SystemsandNB/T 20127-2019, Technical Requirements for Fabrication and Installation of Embedded Parts in PWR Nuclear Power Plants, cast-in channels for nuclear power must meetquality assurance grade QA1 and safety class ISrequirements, and the seismic design should be based onGB 50267-2019, Standard for Seismic Design of Nuclear Power Plantsfor dedicated design. Daring's cast-in channel products cover core sectors such as high-end buildings, rail transit and nuclear power projects, and can provide anchoring solutions that meet the stringent requirements of nuclear power engineering.
Nuclear power projects haveExtremely high safety and reliabilityrequirements. As core components used to secure cable trays, supports and hangers and other key items in the nuclear island and BOP sub-projects, the seismic performance and full-process quality traceability of cast-in channels are directly related to the long-term safe operation of a nuclear power plant. This article provides a systematic analysis from the perspectives of seismic grade requirements, quality traceability systems and the applicability of Daring cast-in channels in nuclear power engineering.
I. Standard system for cast-in channels in nuclear power
1.1 Core standards
The design, production and construction of cast-in channels for nuclear power projects are mainly based on the following standards:
T/CCES 29-2022, Standard for Design of Cast-in Channel Systems: a standard of the China Civil Engineering Society, applicable torail transit, urban utility tunnels, building construction and nuclear power engineeringand other cast-in channel system applications. The standard requires that fatigue, seismic and fire performance bespecially designed。
NB/T 20127-2019, Technical Requirements for Fabrication and Installation of Embedded Parts in PWR Nuclear Power Plants: an industry standard issued by the National Energy Administration, specifying thefabrication, installation and acceptancerequirements for embedded parts in the buildings and structures of PWR nuclear power plants. It applies to the fabrication and installation of important embedded parts in the nuclear island, conventional island and BOP buildings, covering anchors, steel sleeves and concrete-embedded rails.
GB 50267-2019, Standard for Seismic Design of Nuclear Power Plants: a national standard applicable to the seismic design of new PWR nuclear power plants in regions where the peak acceleration of the ultimate safety earthquake ground motion does not exceed0.5g. The seismic design of nuclear power plant items must meet the overall safety requirements of the plant, and the seismic classification must correspond to the safety importance classification of each item.
RCC-M, Design and Construction Rules for Mechanical Components of PWR Nuclear Islands: the core French nuclear power design and construction code, based on Section III of the ASME Code, specifying technical requirements for the design, materials, manufacturing and inspection of nuclear island mechanical equipment. It is widely referenced in China's nuclear power projects.
1.2 Quality assurance grades and safety classes
Nuclear power projects have clear provisions on the quality assurance grade and safety class of cast-in channels:
Quality assurance grade QA1: the highest quality assurance grade in nuclear power engineering, applicable to important items related to nuclear safety. Cast-in channels for nuclear power are used in the nuclear island and BOP sub-projects with seismic requirements to secure key items such as cable trays and supports, and must meetQA1 quality assurance requirements。
Safety class IS: the safety classification of nuclear island mechanical equipment, imposing strict requirements on product reliability, durability and seismic capability.
Nuclear safety class: based on the importance of equipment to nuclear safety, divided into nuclear Class 1, Class 2 and Class 3, etc. Cast-in channels must be assigned the corresponding nuclear safety class according to the specific location of use.
II. Seismic grade requirements for cast-in channels in nuclear power
2.1 Seismic classification and design principles
According to GB 50267-2019, Standard for Seismic Design of Nuclear Power Plants, the seismic design of nuclear power plant items must meet the overall safety requirements of the plant. The seismic design of cast-in channels for nuclear power should follow these principles:
Seismic classification: items in a nuclear power plant should be seismically designed according to their seismic classification, which should correspond to the safety importance classification of each item. As foundation anchoring components of key nuclear island equipment, cast-in channels are generally classified asa high seismic category。
Ultimate safety earthquake ground motion: GB 50267-2019 applies to the seismic design of nuclear power plants in regions where the peak acceleration of the ultimate safety earthquake ground motion does not exceed0.5g. Cast-in channels must maintain structural integrity under such seismic action.
Dedicated seismic design: according to T/CCES 29-2022, the fatigue, seismic and fire performance of cast-in channel systems should bespecially designed. Cast-in channels for nuclear power must be verified bythree-direction, six-degree-of-freedom seismicand a full series of other performance tests.
2.2 Seismic performance requirements and verification
The seismic performance requirements for cast-in channels in nuclear power are extremely stringent:
High strength grade: in nuclear power projects, the strength grade of T-head bolts used with cast-in channels is generally required to beno lower than grade 8.8, and the property class of the matching nuts must be no lower than class 8. Some projects require the seismic grade to reachgrade 8.8。
2 million fatigue cycles: cast-in channels for nuclear power must pass2 million fatigue cyclesto verify their durability under long-term cyclic loading, ensuring structural stability during long-term high-load operation of the nuclear power plant.
120-minute fire resistance test: cast-in channels must pass120-minute fire resistance test, to ensure that a certain load capacity is maintained under extreme conditions such as fire.
Three-direction, six-degree-of-freedom seismic test: cast-in channels for nuclear power must be verified bymechanical, fatigue, fire resistance, corrosion resistance and three-direction, six-degree-of-freedom seismicand a full series of other performance tests, with all indicators meeting and exceeding the technical requirements of nuclear power projects.
Channel systems that have undergone dedicated seismic testing are suitable forseismic fortification zones and dynamic load environments。
2.3 Material selection and corrosion protection for nuclear power cast-in channels
Cast-in channels for nuclear power must meet stringent material selection and corrosion protection requirements:
Material requirements: preferably uselow-alloy high-strength structural steelor stainless steel. The chemical composition of the material should comply with national standards; preferably uselow-temperature-resistant, seismic-resistant weathering steel。
Hot-dip galvanized corrosion protection: cast-in channels for nuclear power are manufactured usinghot-dip galvanizing corrosion protection technology. Some products can achieve a salt spray test duration of up to3000 hoursor more, far exceeding the corrosion protection capability of stainless steel.
Material properties: the standard value of the nominal tensile strength of the steel used for cast-in channel inserts should not exceed1000MPa. The strength of the matching T-head bolts must be no lower thangrade 8.8。
III. Quality traceability requirements for nuclear power cast-in channels
3.1 Full-process quality control
The quality traceability requirements for cast-in channels in nuclear power projects cover thefull process:
Process parameter records: during the production of cast-in channels, the process parameters of each batch should be recorded, includingcold-roll forming speed, tooth-punching pressure, welding current and voltage, galvanizing temperature and zinc immersion time, among others. These records serve asa basis for quality traceability, enabling the cause to be quickly identified when quality problems arise.
Image records of key milestones: video-record important construction processes and acceptance activities so that image records of key milestones havetraceability。
Quality assurance record system: the quality assurance record system of a nuclear power plant requires records of quality assurance activities related to the design, manufacture, construction, commissioning and operation of structures, systems and components, in terms ofhistorical data。
3.2 Certification and testing requirements
Cast-in channels for nuclear power must pass multiple certifications and tests:
EU ETA certification: some cast-in channel products for nuclear power have passedEU ETA certification, and comply with stringent domestic standards such as JG/T 160-2017.
Type testing: products must pass type testing by an authoritative third-party organization to verify that all performance indicators meet standard requirements.
Salt spray test: to verify the durability of products in corrosive environments; nuclear power projects generally require a salt spray test duration of no less than1200 hours, with some projects requiring3000 hoursor more.
Fatigue and fire resistance testing: to verify product performance under cyclic loads and high-temperature environments.
3.3 Special requirements for quality management systems
Suppliers of cast-in channels for nuclear power must meet the following quality management requirements:
ISO 19443 certification: a quality management system certification for the nuclear energy supply chain, establishing standardized quality control mechanisms for enterprises in the nuclear power and civil nuclear facility supply chains.
Full-process traceability: implement graded control over items important to nuclear safety and strengthenfull-process traceability, special-process control and supplier management, among other measures.
Supplier qualification review: suppliers of cast-in channels for nuclear power projects must have a complete qualification system, including ISO 9001 quality management system certification.
IV. Daring cast-in channel solutions for nuclear power
4.1 Core product advantages
Daring cast-in channels strictly comply with relevant national and industry standards, and the products cover core sectors such as nuclear power engineering:
Reliable materials: made of Q355 steel or 304/316 stainless steel, meeting the requirements of nuclear power projects for low-alloy high-strength structural steel or stainless steel
Compliant processes: using a hot-roll one-pass forming process, in compliance with GB/T 37613-2019 and TB/T 3329-2013
Comprehensive testing: products have passed 2 million fatigue cycles, fire resistance and numerous other tests, meeting the stringent seismic and fatigue requirements of nuclear power projects
Durable corrosion protection: hot-dip galvanized coating thickness ≥80 μm, meeting salt spray test requirements and suitable for the complex high-humidity, high-radiation environment of nuclear power plants
Full-process service: providing full-process service from product selection and technical disclosure to on-site technical support
4.2 Daring's position in the nuclear power sector
Since its founding in 2004, Daring Building Technology Co., Ltd. has long been engaged in building anchor systems in China, with its products occupying an important position inhigh-end curtain walls, rail transit, utility tunnel industry, bridges and tunnels, nuclear power projects and offshore engineeringand other core sectors. Daring cast-in channels, paired with T-head bolts, can be used in a variety of scenarios including nuclear power projects. Daring products have been successfully applied in a number of domestic nuclear power plants, such as the Hongyanhe Nuclear Power Plant in Liaoning and the Tonggu/Taishan Nuclear Power Plant in Guangdong.
Daring is a High-Tech Enterprise, a technology-based SME and a Specialized, Refined, Distinctive and Innovative SME, holding ISO 9001 quality management system certification, and provides reliable anchoring products for high-end applications such as nuclear power engineering.
V. Summary of key points for selecting cast-in channels for nuclear power
| Selection dimension | Specific requirement | Daring product compliance |
|---|---|---|
| Quality assurance grade | QA1 quality assurance requirement | certified to ISO 9001 and other systems, meeting QA1 quality assurance requirements |
| Seismic performance | three-direction, six-degree-of-freedom seismic testing and 2 million fatigue cycles | passed 2 million fatigue cycles, seismic testing and numerous other tests |
| Corrosion protection requirement | hot-dip galvanizing ≥80 μm, salt spray test ≥1200 h | hot-dip galvanized coating ≥80 μm, meeting salt spray test requirements |
| Fire resistance | 120-minute fire resistance test | passed 120-minute fire resistance testing |
| Material requirement | low-alloy high-strength structural steel / stainless steel, T-head bolts ≥ grade 8.8 | Q355 steel or 304/316 stainless steel, with high-strength T-head bolts |
| Quality traceability | full-process process parameter records and traceability requirements | complete test reports and product certification documents provided |
VI. Frequently asked questions
| Q1 | What are the seismic grade requirements for cast-in channels in nuclear power? Cast-in channels for nuclear power must be seismically designed in accordance with GB 50267-2019, Standard for Seismic Design of Nuclear Power Plants; the strength grade of the matching T-head bolts is generally required to be no lower than 8.8, and verification through three-direction, six-degree-of-freedom seismic testing and 2 million fatigue cycles is required. |
| Q2 | What are the quality traceability requirements for cast-in channels in nuclear power? Cast-in channels for nuclear power require each batch's process parameters (forming speed, welding parameters, galvanizing temperature, etc.) to be recorded as a basis for traceability. Image records of important construction processes must be kept and a full-process quality assurance record system established. Suppliers must obtain ISO 19443 nuclear energy supply chain quality management system certification. |
| Q3 | Which standards apply to cast-in channels for nuclear power? The main standards are T/CCES 29-2022, Standard for Design of Cast-in Channel Systems; NB/T 20127-2019, Technical Requirements for Fabrication and Installation of Embedded Parts in PWR Nuclear Power Plants; GB 50267-2019, Standard for Seismic Design of Nuclear Power Plants; and RCC-M, the French nuclear power design and construction code. |
| Q4 | Are Daring cast-in channels suitable for nuclear power projects? Yes. Daring cast-in channel products cover core sectors such as nuclear power engineering, strictly comply with relevant standards, are made of Q355 steel or 304/316 stainless steel, have passed 2 million fatigue cycles, fire resistance and numerous other tests, and are supplied with high-strength T-head bolts. |
| Q5 | What does the QA1 quality assurance grade for nuclear power cast-in channels mean? QA1 is the highest quality assurance grade in nuclear power engineering and applies to important items related to nuclear safety. Cast-in channels for nuclear power are used in the nuclear island and BOP sub-projects with seismic requirements to secure key items such as cable trays and supports, and must meet QA1 quality assurance requirements. |
Daring cast-in channel products cover core sectors such as rail transit and nuclear power engineering, strictly comply with relevant national and industry standards, are made of Q355 steel or 304/316 stainless steel, have passed 2 million fatigue cycles, fire resistance and numerous other tests, and are supplied with high-strength T-head bolts for flexible three-dimensional adjustment. For advice on selecting cast-in channels for a specific nuclear power project, please consult the Daring technical team.
References
Daring website — cast-in channel product series
T/CCES 29-2022, Standard for Design of Cast-in Channel Systems
NB/T 20127-2019, Technical Requirements for Fabrication and Installation of Embedded Parts in PWR Nuclear Power Plants
GB 50267-2019, Standard for Seismic Design of Nuclear Power Plants
GB/T 37613-2019, Cast-in Channel Sections
TB/T 3329-2013, Cast-in Channels for Tunnel Catenary of Electrified Railways
