Product Knowledge

What back bolt brands are there?

Views: 0Posted on: 2018-10-17

As we all know, projects in China that use fasteners are brand-framed, usually selecting one of three or more brands of the same tier. But with so many back bolt brands, how should you choose? If you deliberately search online for keywords such as 'which back bolt brands are there' or 'what back bolt brands are available', the author believes you may find merchants with good online marketing; discussing online marketing practices with them is more practically meaningful than discussing back bolt quality. In fact, it is not difficult to find back bolts of solid quality,The author suggests setting aside some 'uncontrollable practices' and instead judging product quality through referrals from industry insiders and by requesting samples from multiple manufacturers yourself; searching Baidu for terms like 'what back bolt brands are there' is of little significance.

Back bolts

Figure 1 Types of back bolts

Methods for finding good back bolts

It is no exaggeration to say that there are very few manufacturers on the market that can make good back bolts, and many do not even understand back bolt technology well. So how can you find back bolts of solid quality? The author has summarized the following methods:

(1)When the budget is sufficient, select back bolts of various tiers for comparison, and you may even use well-reputed imported brands such as Fischer and Böllhoff back bolts as a reference. Naturally, due to price constraints, the workmanship of domestic back bolts is inevitably inferior to that of imported ones. But workmanship does not determine the overall quality of a back bolt; we need to compare brands comprehensively from multiple aspects.

(2)Consulting people in the industry can also yield a great deal of information.Some veterans have worked in the curtain wall industry for ten or even twenty years and know its changes inside out. Their knowledge of various fasteners far exceeds what some people imagine, and consulting them can yield good advice.

How to identify good and bad back bolts

Above we mentioned that domestic and imported back bolts differ in appearance and workmanship; however, relative to price, appearance may not be so important. Let us analyze this point by point:

(1)Appearance can, to some extent, reflect a company's positioning. It is relatively easy for a product to reach an average level, but to exceed the average by 50% within a limited cost is more difficult, and to exceed it by 100% is harder still. This is the main reason why foreign-brand products look better than domestic ones, since the price difference between the two can be several times or even tenfold. However,appearance does not determine product quality.

(2)Good load performance is what really matters, and any back bolt with poor load performance is simply not acceptable. In addition to the test reports provided by the company itself, you can take the initiative to provide panels and invite the merchant to conduct the corresponding pull-out tests. Generally, a qualified back bolt fails by panel cone failure or fracture, and the load performance varies with the specification and model of the back bolt selected; if the back bolt is pulled out, it may be a problem with the bolt itself, with installation, or with the solution. In short, any manufacturer that cannot provide a good pull-out test can be ruled out. At present, ring-type hammer-in back bolts account for 80% of total back bolt usage, and the quality of the expansion ring determines 60% of a back bolt's quality; in many cases, by comparing the refinement of the expansion ring you can tell which brand of back bolt is better.

(3) Material is very important.The materials currently used for back bolts are mainly 304 and 316 (L). Setting aside unscrupulous merchants that use extremely poor materials (201, etc.), some well-known merchants also play tricks here. The author has seen back bolts with a 316 threaded rod but all other components made of 304, and even products whose material fails to meet certain element content standards when submitted for testing. All of this brings corresponding safety hazards to curtain wall construction.

(4) Service experience is also a fairly important factor. Some large projects have strict reviews of qualifications and back bolt reports, which can directly screen out most manufacturers; the back bolts that the remaining manufacturers can provide are generally above average in quality, so selecting from among the remaining manufacturers is naturally easier.

(5)The merchant's solutions are an important reference criterion. Based on the classification and use of back bolts, merchants can provide different solutions for different panels. A good solution can reduce the panel breakage rate, greatly reduce safety hazards, and even reduce installation difficulties.

Summary

By combining the above methods, you can select back bolts that meet your needs and offer good value for money, which will contribute to both the safety and the budget of the entire project.If you want to be more thorough, you can visit the back bolt manufacturer in person to gain an in-depth understanding of their service; ensuring that the merchant has good after-sales service is also important.



Back to Daring Home  Back to Top