In today's era of rapid development in the construction industry, construction efficiency, safety compliance, and engineering durability have become core indicators of project quality. Traditional welding, as the mainstream method in the field of building connections, faces many industry pain points — difficult hot work approval, high labor costs, uncontrollable quality, and poor anti-corrosion performance — and can hardly match the prefabricated, high-efficiency development trend of modern buildings.
Shanghai Daring has precisely captured industry needs and launched the DC weld-free plate channel solution, converting complex on-site welding into standardized bolted physical assembly, solving the industry's stubborn problems of traditional welding at the source, and bringing an efficient, safe, and economical new connection experience to building curtain walls, renovation projects, structural engineering, and other fields.
Drawbacks of traditional plate embedment
For a long time, traditional welding has dominated building construction, but its inherent limitations have become a key factor constraining project progress and quality:
High safety hazards and tight regulatory red lines: welding is the main cause of fires on construction sites, as welding spatter can easily ignite flammable materials such as insulation and safety nets. As safety regulations become increasingly strict, hot work approval procedures are cumbersome, and fire watch personnel and fire extinguishers must be provided; open flames are strictly prohibited in shopping malls during business hours and in enclosed indoor spaces, and violations face work stoppages and heavy fines.
Expensive labor and many hidden costs: most managers only pay attention to material price differences, ignoring the high hidden costs behind welding, including welding machine and generator rental, electricity, consumables such as electrodes and gas, the labor cost of post-weld derusting and anti-rust painting, and the idle time losses caused by waiting for welds to cool.
Uncontrollable quality with corrosion as a fatal flaw: welding quality depends entirely on the workers' skill level and working condition, and internal defects such as weld slag inclusion, porosity, and cold welds are difficult to detect with the naked eye; meanwhile, on-site welding completely destroys the steel's original galvanized layer, and anti-rust paint applied on site cannot cover weld corners, often leading to rust and yellow water streaks after 1-2 years, seriously polluting the building facade.
To address the industry pain points above, Daring has launched theweld-free plate channel system, designed specifically for small and medium-sized projects and non-structural connections. With 'fast, economical, and safe' as its core values, it replaces traditional welding with standardized mechanical connections, returning building construction to its essence of simplicity, efficiency, and reliability.
Daring DC weld-free plate channel: refined design, quality first
The Daring DC weld-free plate channel is a prefabricated anchoring assembly achieved by perfectly combining a hot-rolled steel channel with a steel plate, together with high-strength bolts. From raw materials to production processes, it strictly follows the highest industry standards to ensure stable and reliable product performance.

Core material and anti-corrosion process
Base material: the channel steel is high-strength Q355B hot-rolled channel steel with excellent mechanical properties, capable of meeting the load-bearing requirements of all kinds of projects.
Anti-corrosion treatment: the product undergoes overall hot-dip galvanizing before leaving the factory, with an average zinc coating thickness >70μm and local thickness >80μm, complying with the national standard GB/T 13912-2020. The zinc layer forms a metallurgical bond with the steel substrate without any damage, ensuring no rust in outdoor environments for 30-50 years; for strongly corrosive environments such as seaside and chemical plants, 304/316 stainless steel can be customized to achieve durability over the full life cycle.
Refined design
Through scientific structural design, the Daring DC weld-free plate channel achieves a solid mechanical interlock connection, with each component performing its own role to jointly guarantee the stability of the overall structure:
Hot-rolled serrated channel: provides mechanical interlock connection along the axial direction, tightly engaging with bolts for strong load capacity;
Cast-in / post-installed steel plate: serves as the base and is formed integrally with the channel steel, ensuring the integrity of the connection;
High-strength T-head bolt: precisely engages the channel teeth to transfer loads; connection strength is guaranteed by industrial-grade standard parts;
Through bolts: effectively prevent vertical displacement of the framing, further enhancing the stability of the overall structure.
Four core advantages, revolutionizing building connection technology
Compared with traditional welding, the Daring DC weld-free plate channel, with its four core advantages of ultimate safety, efficient construction, three-dimensional adjustment, and lasting corrosion protection, comprehensively resolves industry pain points and becomes the preferred solution in the field of building connections.
1. Ultimate safety: eliminating fire and structural risks at the source
Open-flame work at height in traditional welding poses a great fire risk, and welding quality depends on human factors, leaving regulatory blind spots in the acceptance of concealed work. The Daring DC weld-free plate channel is installed entirely by cold working, with no open flame throughout the process, completely eliminating fire hazards on the construction site and meeting stringent safety and civilized construction standards; mechanical interlocking is achieved through the physical engagement of the serrated channel with the T-head bolt, and connection strength is guaranteed by standardized industrial-grade components, without relying on workers' skills; installation quality only needs to be checked via torque values and appearance, making acceptance intuitive, transparent, and reliable, and fundamentally avoiding structural hazards such as cold welds and slag inclusion.
2. Efficient construction: prefabricated installation shortens the construction period by 50%
Traditional welding is time-consuming, requires certified professional welders, is greatly affected by rain and snow, and is prone to idle time between processes. The Daring DC weld-free plate channel arrives on site as finished components, and installation requires only an impact drill and a wrench, increasing the installation efficiency of a single node by 3-5 times; no special welders are needed — ordinary workers can perform standard operations with a torque wrench after simple training, greatly reducing labor costs; the fully dry construction method is not limited by weather conditions, allowing all-weather work and ensuring project delivery milestones. Taking 100 connection nodes as an example, traditional welding takes 5 days, while the Daring DC weld-free plate channel takes only 2.5 days, improving overall efficiency by more than 100%.
3. Three-dimensional adjustment: flexibly accommodating complex on-site construction tolerances
Dimensional deviations are inevitable in civil construction, and the rigid fixing method of traditional welding is difficult to adapt, often requiring on-site cutting and adjustment, which is time-consuming and affects structural strength. The Daring DC weld-free plate channel adopts an innovative design of serrated channel plus long slots, enabling flexible adjustment in three dimensions — front-back, left-right, and up-down: vertical displacement adjustment through the long slots of the channel, left-right adjustment through the full-length channel design that allows the T-head bolt to slide freely along the channel, and in-out adjustment through the matching angle bracket. It can absorb civil construction deviations to the greatest extent without on-site cutting, ensuring that curtain walls, piping, and other installations are level and plumb.
4. Lasting corrosion protection: overcoming the industry's stubborn problem of welding rust
Rust caused by on-site welding damaging the steel's galvanized layer has always been a chronic problem in construction projects, with extremely high later maintenance costs. The Daring DC weld-free plate channel uses factory overall hot-dip galvanizing, with an intact, undamaged anti-corrosion layer whose anti-corrosion performance lasts as long as the main building structure; the stainless steel customization option for special corrosive environments further expands the product's scope of application. No additional anti-corrosion maintenance is required over the full life cycle, greatly reducing the overall project cost in the long run.
Full-scenario coverage, adaptable to diverse engineering needs
With its excellent performance and flexible adaptability, the Daring DC weld-free plate channel is widely used in various construction fields, meeting diverse connection needs:
Building curtain walls: suitable for framed glass curtain walls, stone curtain walls, and terracotta panel curtain walls, especially suitable for curtain wall construction of super high-rise buildings;
Pipeline support: can serve as the base plate for various engineering pipelines such as air conditioning ducts, communication cables, and fire water pipes, fitting the pipe galleries of major buildings;
Prefabricated buildings: used for modular construction such as PC exterior wall connections, in line with the industrialized construction concept of prefabricated buildings;
Special working conditions: suitable for structural anchoring in highly corrosive environments such as chemical plants and seaside buildings, as well as construction scenarios where open flames are strictly prohibited, such as shopping malls and indoor venues.
Deep roots in building anchoring: Daring sets the industry benchmark
Behind this innovative weld-free plate channel product is Shanghai Daring Building Technology Co., Ltd., which has been deeply engaged in building anchoring and connection technology for more than twenty years.
Founded in 2004 and headquartered in Shanghai, the company takes its brand name from The Analects of Confucius — 'helping others succeed is establishing oneself; establishing others is establishing oneself' — and has always upheld its original aspiration of 'giving widely to benefit all,' focusing on professional, environmentally friendly, technology-driven, and healthy building products. It is a well-known brand in the field of building anchoring and connection systems in China.
With solid technical strength and rigorous corporate management, Daring has successively won a number of national and municipal authoritative certifications, including High-Tech Enterprise, Specialized, Refined, Distinctive, and Innovative (SRDI) enterprise, Shanghai Key Trademark, and AAA-level Contract-Honoring and Trustworthy Enterprise. These hard-core honors are not only recognition of the company's technological innovation capability but also strong proof of its leading position in the industry. At the same time, Daring has deeply participated in the formulation and revision of many national and industry standards, such as Back Bolts for Building Curtain Walls, Technical Standard for Application of Prefabricated Exterior Wall Panels, and Technical Standard for Metal and Stone Curtain Wall Engineering in Sichuan Province, leading the industry's standardized development with technology.
At present, Daring's business layout fully covers core product systems such as mechanical anchors, chemical anchors, back bolts, aluminium alloy pendants, and cast-in channels, forming a complete industrial chain from product R&D and manufacturing to engineering services, providing high-quality anchoring and connection solutions for all kinds of construction projects across the country.
Full-process service support to safeguard your project
Daring always adheres to the service philosophy of 'not only providing products, but also providing solutions,' offering customers professional support throughout the entire process from early design to later construction:
Channel embedment mechanical calculation: professional engineers deliver an accurate mechanical calculation report within 2 days;
Channel embedment model selection: matching the most suitable cast-in channel model for customers the same day;
On-site technical guidance: technical engineers go to the site to provide construction technical guidance;
Channel embedment pull-out test: free tensile test data for different panel materials;
Fast delivery service: relying on a well-developed logistics system to ensure timely product delivery;
Special customization service: customized products in special specifications according to customer needs.
Conclusion
From traditional welding to prefabricated weld-free connections is a major innovation in building construction technology. The Daring DC weld-free plate channel solution not only resolves the pain points of traditional welding but also drives building connection technology toward standardization, industrialization, and intelligentization.
In the future, Shanghai Daring Building Technology Co., Ltd. will continue to deepen its work in the field of building materials, constantly developing better and more efficient products and solutions, and working hand in hand with partners to jointly build safe, green, high-quality construction projects and contribute to the high-quality development of China's construction industry.
