Mechanical Anchors

The Daring mechanical anchor series covers undercut, self-undercutting, drop-in, Anka and heavy-duty mechanical anchors, among other categories. Made of carbon steel or stainless steel with multiple coating processes, they achieve mechanical interlocking — locked upon installation with no curing required. With high load capacity plus seismic and fatigue resistance, they suit cracked / non-cracked concrete, natural stone and other base materials, and are widely used in curtain walls, steel structures, heavy equipment, rail transit and tunnel pipe racks.

Self-Undercutting Anchor

The self-undercutting anchor can be used for anchoring in concrete and exterior wall structural members. The undercut drilling is completed simultaneously as the anchor is hammered in, forming a mechanical interlock at the bottom of the anchor. Daring self-undercutting anchors are made of carbon steel grade 5.8 or above, or 304/316 stainless steel.

Views: 0

Product Information

  • Material

    Grade 5.8 carbon steel
    Grade 8.8 carbon steel
    304
    316

    Surface treatment (carbon steel only)

    Electro-galvanized
    Hot-dip galvanized

    Anchor components

    Threaded rod
    Sleeve
    Flat washer
    Spring washer
    Hex nut

    Sizes and models

    M10*60*100
    M12*80*130
    M12*100*150
    M16*100*160
    M16*125*190

    Production standard

    JGJ 145-2013
    GB/T 16938-2008
    GB/T 5267.1-2002
    GB/T 5267.3-2008
    GB/T 41-2016
    GB/T 6170-2015
    GB 93-1987
    GB/T 95-2002
    GB/T 97.1-2002
    GB/T 3098.1-2010

    Certification and testing

    Mechanical properties
    N-level certification
    Tensile performance
    Concrete strength compatibility
    Maximum installation torque

  • Carbon steel grade 5.8 or above, with yield strength up to 400MPa

    We offer different coating processes, mainly electro-galvanizing and hot-dip galvanizing. Carbon steel grade 8.8 and 304/316 stainless steel are also available.

  • Dual-blade design for combined cutting and expanding installation

    The dual blades cut into the straight hole faster, completing the undercut drilling in a single installation pass. No separate undercut drilling is needed, greatly reducing working time and avoiding safety hazards.

  • Power-driven installation tools included for easier installation

    Daring provides dedicated square-shank and round-shank hammering sleeves; once connected to a hammer drill, simply place the sleeve over the anchor threaded rod and use the hammer drill for fast installation.

  • Mechanical interlock installation for excellent mechanical properties

    Daring self-undercutting anchors achieve pull-out capacity above 50kN and perform even better under high loads, vibration and impact loads. With no curing time to wait for, they effectively improve construction efficiency.

Technical Data

How to Install

Self-Undercutting Anchor Installation Steps

Back to Mechanical Anchors  Back to Daring Home  Back to Top