Chemical Anchors

The Daring chemical anchor series covers high-strength, capsule, reverse-cone and dynamic-load reverse-cone anchors, paired with the DL-200E modified epoxy injection anchoring adhesive that meets the national Class A adhesive standard. Available in carbon steel of grade 5.8 and above or 304/316 stainless steel, they offer strong bonding anchoring force, temperature and seismic resistance, and suit cracked concrete, with stable anchoring performance under static and dynamic loads. Widely used for post-installed anchoring of concrete and exterior wall structural components.

Injection Anchoring Adhesive

The Daring DL-200E modified epoxy injection anchoring adhesive is mainly used for anchoring structural members. It features no crystallization and no adhesive leakage, with chemical properties meeting the national Class A adhesive standard. Daring capsule chemical anchors and reverse-cone chemical anchors are mainly fixed with this injection anchoring adhesive.

Views: 0

Product Information

  • Composition

    Two-component modified epoxy resin

    Capacity

    360ml

    Mixing ratio

    5:1

    Certification and testing

    Class A adhesive certification
    Safety appraisal report
    Tensile and shear strength
    Bond strength
    Acid and alkali resistance
    Insulation resistance

  • Class A adhesive certification from the National Building Materials Testing Center

    Daring injection anchoring adhesive has passed the Class A adhesive certification of the National Building Materials Testing Center, with no crystallization, no adhesive leakage and stable chemical properties, backed by more than ten years of application experience.

  • Perfect match with Daring special reverse-cone anchors

    When Daring special reverse-cone anchors are used with Daring injection anchoring adhesive, the products deliver better performance and the load capacity reaches an excellent level.

  • Matching adhesive mixing nozzle for uniform mixing with low resistance

    Each adhesive cartridge comes with the corresponding mixing nozzle. Daring's mixing nozzle uses an 18-section fluid design with alternating segment sizes, ensuring uniform adhesive output with low resistance.

  • Suitable for anchoring in cracked concrete

    GB50367-2013 'Design Code for Strengthening Concrete Structures' explicitly recommends that injection anchoring adhesive is more suitable for use in cracked concrete.

  • Dedicated adhesive gun for fast, effortless dispensing

    Daring provides a dedicated 5:1 adhesive gun for injection anchoring adhesive, combining fast dispensing with effortless trigger pressure. It is provided free of charge for orders of 100 cartridges or more.

Technical Data

How to Install

Back to Chemical Anchors  Back to Daring Home  Back to Top